Confederate Items

Showing 141 to 160 out of 449


CONFEDERATE CAVALRY BUTTON

CONFEDERATE CAVALRY BUTTON

CS126A.  25mm.  BM: H T & B / MANCHESTER.   [ss] ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ THIS ITEM, AS WITH ALL OTHER ITEMS AVAILABLE ON OUR WEB SITE, MAY BE PURCHASED THROUGH OUR LAYAWAY… (998-1144). Learn More »

CONFEDERATE BRASS CAVALRY SPUR RECOVERED ON THE RETREAT ROUTE FROM GETTYSBURG

CONFEDERATE BRASS CAVALRY SPUR RECOVERED ON THE RETREAT ROUTE FROM GETTYSBURG

A small thin brass spur recovered on the Northern Confederate retreat route from Gettysburg. Found on the South Mountain Farm between McKnightstown and Cashtown near Flohrs Church. This area was… (286-442). Learn More »

RELIC RICHMOND MUSKET TOOL

RELIC RICHMOND MUSKET TOOL

Excavated Confederate musket tool.  Hand forged iron tool manufactured at Richmond.  Constructed of one 3 ½” long arm with a box-end wrench on the end.  A second piece, 3” long with a screw… (1000-1201). Learn More »

CONFEDERATE TIN CANTEEN

CONFEDERATE TIN CANTEEN

Spheroid canteen made entirely of tin with two convex side panels with crimped and soldered edges. Canteen meas. approx. 6.25 inches across with edges that are 1.50 inches wide. All three sling… (1000-555). Learn More »

ORIGINAL 1862 COPY OF “CAUSE AND CONTRACT” PUBLISHED IN RICHMOND, VIRGINIA 1862

ORIGINAL 1862 COPY OF “CAUSE AND CONTRACT” PUBLISHED IN RICHMOND, VIRGINIA 1862

Paperbound edition of “CASUE AND CONTRAST: AN ESSAY ON THE AMERICAN CRISIS” by T. W. MacMahon and published by West & Johnston of Richmond in 1862. Book meas. approx. 5.50 x 8.75 inches and… (1000-1647). Learn More »

REGULATIONS FOR THE ARMY OF THE CONFEDERATE STATES, 1863

REGULATIONS FOR THE ARMY OF THE CONFEDERATE STATES, 1863

By the authority of the War Department. Published by West & Johnson, Richmond, VA, 1863. 432 pp. Marbled card board covers, with butternut cloth spine, 4.5 x 7.25”. Exhibits wear and rubbing at… (1000-1609). Learn More »

THE CONFEDERATE FIRST READER…PROSE & POETRY…FOR YOUNG CHILDREN IN THE SCHOOLS AND FAMILIES OF THE CONFEDERATE STATES

THE CONFEDERATE FIRST READER…PROSE & POETRY…FOR YOUNG CHILDREN IN THE SCHOOLS AND FAMILIES OF THE CONFEDERATE STATES

Published by G.L. Bidgood, Richmond, VA, 1864. 120 pp. Butternut card covers, 7 x 4.25”, with brown cloth spine. Exhibits light scuffs and slight wear and soiling at the extremities. Else VG. An… (1000-1616). Learn More »

MILITIA / CONFEDERATE CLIPPED-CORNER BELT PLATE

MILITIA / CONFEDERATE CLIPPED-CORNER BELT PLATE

Excavated “clipped corner” belt plate.  Dark green-brown mixed patina.  Retains very good shape as most sheet brass plates were susceptible to bends and folds.  This specimen exhibits only the… (1000-1316). Learn More »

EXCAVATED CONFEDERATE FRAME BUCKLE

EXCAVATED CONFEDERATE FRAME BUCKLE

Simple Confederate frame buckle measuring 65mm wide x 75mm tall.  Dug belt buckle with green patina. The central bar that the belt leather attaches to has a hairline, but the bar itself is not bent.… (1000-1336). Learn More »

¼ PLATE AMBROTYPE OF PRIVATE HENRY HOBSON, CO. E, 41ST VIRGINIA INFANTRY

¼ PLATE AMBROTYPE OF PRIVATE HENRY HOBSON, CO. E, 41ST VIRGINIA INFANTRY

Waist-up view wearing a frock coat open in front and secured by a tab at the top. He also wears a light-colored vest. All buttons are staff style but not in focus enough to see if they are state… (1000-768). Learn More »

VERY RARE NON-DUG RICHMOND CARBINE TOOL

VERY RARE NON-DUG RICHMOND CARBINE TOOL

This is an exceedingly scarce Confederate-made tool.  In very good, original condition, this hand forged iron tool was manufactured at Richmond.  For carbines, this is a smaller version of the… (1000-1197). Learn More »

$975.00
ON HOLD

TWO PIECE CS TONGUE AND WREATH PLATE ON THE ORIGINAL BELT

TWO PIECE CS TONGUE AND WREATH PLATE ON THE ORIGINAL BELT

Sandcast two-piece plate in excellent condition. Tongue is slightly convex with a good, clear “C’ and an “S” that has a flaw in the upper serif. Wreath has pronounced detail. Both pieces have… (846-107). Learn More »

US MODEL 1861 SPRINGFIELD DATED 1862 WITH CONFEDERATE MARKING

US MODEL 1861 SPRINGFIELD DATED 1862 WITH CONFEDERATE MARKING

Barrel is semi-bright with light scattered mottling. There is no pitting worth mentioning. Front and rear sights are present. Rear sight has both flip-up leaves and is blued. Breech area has a strong… (218-536). Learn More »

RARE AUTHENTIC, NON-DUG CONFEDERATE CAST BLOCK “I” COAT BUTTON

RARE AUTHENTIC, NON-DUG CONFEDERATE CAST BLOCK “I” COAT BUTTON

Albert’s CS184.  Confederate wartime manufacture for Infantry troops. Button is one-piece sand cast, back is deep well concave, post under shank, no marks.  Crude southern "local" manufacture.… (127-2202). Learn More »

CONFEDERATE OFFICER’S COAT BUTTON

CONFEDERATE OFFICER’S COAT BUTTON

Albert’s CS36A. Central eagle facing left surrounded by eleven stars on lined field. Two part convex button, flat brass back.  BM:  “ * H  T & B * MANCHESTER” dm on a very flat back,… (127-2197). Learn More »

RARE CONFEDERATE “THREE SQUARE” SOCKET BAYONET

RARE CONFEDERATE “THREE SQUARE” SOCKET BAYONET

This is an excavated example of a Confederate-made musket socket bayonet, probably for a M-1816 musket.  Measuring 20” overall with a 2 5/8” socket.  This was made for an early .69 caliber… (1000-1385). Learn More »

RARE CONFEDERATE “THREE SQUARE” SOCKET BAYONET FROM DREWRY’S BLUFF

RARE CONFEDERATE “THREE SQUARE” SOCKET BAYONET FROM DREWRY’S BLUFF

This is an excavated example of a Confederate-made musket socket bayonet.  Measuring 21” overall with a 2 5/8” socket.  This was made for an early .69 caliber musket with a bayonet lug mounted… (1000-1372). Learn More »

RARE CONFEDERATE “THREE SQUARE” SOCKET BAYONET MADE INTO POT HOOK

RARE CONFEDERATE “THREE SQUARE” SOCKET BAYONET MADE INTO POT HOOK

This is an excavated example of a Confederate-made musket socket bayonet.  Measuring approximately 21” overall with a 2 ¾” socket.  This was made for an early .69 caliber musket with a bayonet… (1000-1374). Learn More »

CONFEDERATE BLACKSMITH MADE SIDE KNIFE FROM CENTRAL VIRGINIA

CONFEDERATE BLACKSMITH MADE SIDE KNIFE FROM CENTRAL VIRGINIA

Overall the knife meas. approx. 13.50 inches. The blade is double edged and meas. approx. 8.75 inches long x 1.25 at the ricasso and then tapering to a point. Blade surface has a nice dark untouched… (1000-748). Learn More »

RARE NON-DUG CONFEDERATE BRIDLE-CUTTER PIKE BLADE

RARE NON-DUG CONFEDERATE BRIDLE-CUTTER PIKE BLADE

This clean, non-dug pike blade is a rare specimen as most available examples are in relic condition. The double-edged blade measures 12" with a 5 ½” downward curved blade extending from its base.… (1000-758). Learn More »


Showing 141 to 160 out of 449

featured item

M1826 MARINE CORPS MAMALUKE SWORD BY HORSTMANN & SONS

Manufactured: Philadelphia Maker: Horstmann & Sons Year: c1830 - 59 Model: M1826 Size: 32 inch Condition: Excellent+ The 1826 styles of the Marine Mamaluke have brought about straighter blades, acid etched blade designs, more curvature to the… (870-81). Learn More »

Upcoming Events

14
Dec