Showing 1 to 251 out of 251
Lots of original blue and some case colors with immaculate checkered hard rubber grips with the rampant colt at top on either side, about excellent condition. Long barrel version with ejector. Barrel… (490-5575). Learn More »
This is a wonderful, little pocket-sized oiler made like a small powder horn, with a small suspension chain fitting two rings on either side of the flat top so that it could be hung up at a work bench… (2024-157). Learn More »
Offered here is a very fine condition japanned tin filled with 100 “bulleted breech caps.” A printed paper label on the lid reads, “100 Superior BULLETED BREECH CAPS. / W. & C. ELEY,… (2024-125). Learn More »
Offered here is a very fine condition japanned tin filled with 100 “bulleted breech caps.” A printed paper label on the lid reads, “100 Superior BULLETED BREECH CAPS. / W. & C. ELEY,… (2024-124). Learn More »
This is an original .69 caliber Buck & Ball cartridge. Composed of a .69 caliber round ball with three .31 caliber buckshot on top. Wrapped in cartridge paper and tied with string between each… (2024-331). Learn More »
$175.00
SOLD
A nice, solid pack containing ten .50 caliber cartridge for the Gallager carbine. These are the paper and brass foil cartridges. Made under Thomas Poultney’s patent of 1863. Pack has been opened… (1179-1448). Learn More »
$350.00
ON HOLD
Johnson & Dow received patents #33,393, #34,061, and #35,687 dated October 1, 1861, January 7, and June 24, 1862 for their cartridges. Using paper or fabric that was treated to make it… (1179-1330). Learn More »
The most famous, single-shot, percussion firearm used during the Civil War was the Sharps carbine, a .52 caliber, breechloading firearm invented and patented by Hartford, Connecticut native Christian… (1099-36). Learn More »
Invented and patented by Gilbert Smith of Buttermilk Falls, New York in late 1855, here is an original Civil War Smith carbine in super condition. This single-shot, percussion shortarm is a .50… (1121-09). Learn More »
This is a good example of the famous Model 1858 Remington Army Revolver. Approximately 122,000 of these were manufactured between the years 1863-1873. This is a percussion, six-shot, .44 caliber… (1099-38). Learn More »
$1,150.00
ON HOLD
Johnson & Dow received patents #33,393, #34,061, and #35,687 dated October 1, 1861, January 7, and June 24, 1862 for their cartridges. Using paper or fabric that was treated to make it… (1179-1329). Learn More »
$125.00
SOLD
Used in the Smith carbine extensively during the early years of the Civil War, this specimen of carbine ammunition is a very scarce .50 caliber “rubber case” cartridge in excellent original… (1179-1328). Learn More »
$350.00
SOLD
This is a paper wrapped pack of percussion caps for revolvers. Small package wrapped “flat” which is unusual as opposed to being wrapped in the typical cylinder shape. Paper remains in excellent… (236-950). Learn More »
$30.00
SOLD
This is a paper wrapped pack of percussion “musket” caps. Package is wrapped “flat” which is unusual as opposed to being wrapped in the typical cylinder shape. This pack came out of a pack of… (236-949). Learn More »
$25.00
SOLD
A Colt Model 1860 Army revolver in complete and in near unfired condition. In production from 1860 through 1873, these handguns were the successor to the Colt Third Model Dragoon pistols. This… (490-3155). Learn More »
These scarce, attractive and rather unique looking .58 caliber rifles made by J. Henry & Son have 35-inch octagon-to-round browned barrels, long-range rear sights and brass mounts encompassing the… (1193-24). Learn More »
Johnson & Dow received patents #33,393, #34,061, and #35,687 dated October 1, 1861, January 7, and June 24, 1862 for their cartridges. Using paper or fabric that was treated to make it… (236-943). Learn More »
Johnson & Dow received patents #33,393, #34,061, and #35,687 dated October 1, 1861, January 7, and June 24, 1862 for their cartridges. Using paper or fabric that was treated to make it… (236-944). Learn More »
Excavated cartridge for Burnside carbine. This easily recognized cartridge was made of drawn brass and features the “swell” around the bullet at the case mouth. This swell held lubricant and was… (236-948). Learn More »
$45.00
SOLD
Dr. Edward Maynard held patent #22,565 dated January 11, 1859. By this patent, cartridge cases for the Maynard carbine were made of drawn brass to form a tube with a closed end. A brass disk was… (236-942). Learn More »
Here is a very rare 32-Bore Sharps cartridge with a multi-groove bullet by Gomez and Mills. This cartridge is in excellent condition. The paper is crisp, and you can clearly see where other cartridges… (2024-288). Learn More »
$495.00
SOLD
A Civil War Colt Model 1860 Army revolver in good original condition. In production from 1860 through 1873, these handguns were the successor to the Colt Third Model Dragoon pistols. The Model 1860… (1099-33). Learn More »
An elegant powder horn. From the size, a priming horn (approx 8" in length). Pleasing cream colored body shading to a greenish brown at the spout. The base is convex, lathe turned to produce incised… (480-354). Learn More »
This is a very good condition P1853 Enfield rifle musket, imported in the hundreds of thousands by both sides in the Civil War, but a scarce one bearing original markings indicating issue to the 110th… (1140-59). Learn More »
$2,950.00
ON HOLD
This is a very nice condition .54 caliber Round Ball cartridge. Composed of a .54 caliber round ball wrapped in cartridge paper and tied with string at the top. The cartridge features the… (1212-159). Learn More »
$175.00
SOLD
These are cartridges for the Lefaucheux revolver. This is the “short” pinfire cartridge; with lead bullet seated into a copper case with a stout pin protruding from the bottom edge. This features… (M19951). Learn More »
Non-dug .52 caliber Spencer cartridge. Solid bullet with two grooves crimped into a copper rimfire case. Variations are found in the groove patterns since there were at least five companies making… (2023-3181). Learn More »
Gallager carbines saw extensive use during the Civil War. The 22 ¼” round barrel has flip up rear sight and heavy blade front sight. Surface is smooth with scattered mottling and retains some… (490-3710). Learn More »
Here is a .35 caliber, Maynard “Improved Hunting or Target Rifle, Number 9” by Massachusetts Arms Company. The single-shot, breech-loading Maynard rifle used a thick-rim primed metallic cartridge… (490-6136). Learn More »
Beautiful conditioned .44 Lemat revolver manufactured by Navy Arms. Revolver is serial number 436. Revolver barrel is 6.75 inches long with a 5.00 inch smoothbore buckshot barrel underneath. Bores of… (922-31). Learn More »
$1,350.00
SOLD
This is an original cartridge containing a .58 caliber, Williams, Type III bullet. Patented and manufactured by Elijah D. Williams. Williams’ patent called for the use of zinc washers and a pin… (1212-80). Learn More »
$225.00
ON HOLD
This specimen is a very nice regulation paper wrapped skin cartridge for the British “Monkey Tail” rifles. Here the cartridge has been carefully removed from the protective wrapper. Very nice… (1212-39). Learn More »
This specimen is a very nice regulation paper wrapped skin cartridge for the British “Monkey Tail” rifles. This one is wrapped in tan paper. Cloth tear strip sticking out of the bottom end. Very… (1212-40). Learn More »
This specimen is a very nice paper wrapped skin cartridge for the British “Monkey Tail” rifles. This one is unusual as it is wrapped in blue paper (typically tan paper). Cloth tear strip sticking… (1212-54). Learn More »
Revolver has an 8.00 inch octagon barrel and a six-shot cylinder. Barrel, loading lever, cylinder and frame are all finished bright. All nipples are present on the cylinder. Hammer is also bright.… (922-30). Learn More »
This famous longarm is a Civil War Model 1860 Spencer Repeating rifle in good condition. Initial army contracts with the Spencer Company of Boston, Massachusetts called for 10,000 repeating firearms… (490-6717). Learn More »
$4,950.00
ON HOLD
This is the Burnside single shot percussion carbine, Model 1864, aka "5th model". It is a .54 caliber carbine manufactured by the Burnside Rifle Co., in Providence, Rhode Island. General Ambrose… (362-1163). Learn More »
This Civil War longarm is a .58 caliber Springfield Model 1863, Type II, single-shot muzzleloader. This M1863 musket was a government arsenal product from Springfield, Massachusetts. Over two hundred… (2023-3263). Learn More »
Rare .44 caliber (54 gauge) cartridge used in the Model 1851 Adams revolver. On October 1, 1852, Robert Adams was awarded a British Patent. The early style of these Adams cartridges were known as… (1212-99). Learn More »
Offered here is an early and interesting shot cartridge. 16-gauge cartridge with powder and shot contained in an outer paper wrapper. Cloth tear strips provide access to the cartridge. An orange label… (1212-138). Learn More »
This the Model 1861, .58 caliber, percussion rifle musket as made at the Springfield Armory in Massachusetts. All gun metal on this rifle has matching patina. A spread-winged eagle motif is stamped on… (2023-3264). Learn More »
The last of the US single shot martial pistol and first of the US percussion pistols, the US Model 1842 percussion pistol was successor to the flintlock Model 1836 and like that earlier pistol was… (490-5704). Learn More »
$1,150.00
ON HOLD
The US Model 1840 musket is complicated in nomenclature and production details. Initially designated the Model 1835, it was finally designated the 1840 and collectors occasionally call it the Model… (490-4171). Learn More »
The title of this study is “REVOLVERS OF THE BRITISH SERVICES, 1854-1954” by W. H. J. Chamberlain and A. W. F. Taylerson and published by Museum Restoration Service of Bloomfield, Ontario and… (236-874). Learn More »
This is a very rare cartridge dating to before the Civil War. Made by Eley Brothers in London, this is a .36 caliber pistol cartridge with a tinfoil powder case. The cartridge was then packed in a… (1212-101). Learn More »
This is a non-regulation leather holster made to accommodate a large revolver such as a Colt or Remington “Army” revolver. The holster measures 11.25” along the front edge of the pocket. Holster… (1179-535). Learn More »
This is a very good, tight example of a Springfield Model 1816 percussion conversion musket typical of those carried by many early Civil War volunteers and intended to fire .69 caliber “buck and… (490-1671). Learn More »
This attractive half-stock Pennsylvania rifle has 37 ½ inch, .40 caliber octagonal barrel engraved on the top flat in script: “A B Smith.” This was Abial Butler Smith, born in Pennsylvania in… (1218-01). Learn More »
This British musket imitates a contemporary government Brown Bess musket, but is much shorter. There are many military-style short muskets, musketoons and carbines that are not identifiable, but this… (1214-02). Learn More »
$1,850.00
ON HOLD
The .69 smooth bore original flint lock musket was manufactured by Lemuel Pomeroy of Pittsfield Massachusetts under the "Militia Act of 1808" specifically for the State of New York. This example draws… (88-185). Learn More »
$2,750.00
ON HOLD
.36 caliber. 7.5" octagonal barrel. SN: 14198. Blued finish, brass backstrap and triggerguard, one-piece walnut grip. Single action percussion Belgian-made copy of a Colt Navy revolver with… (1052-682). Learn More »
$4,950.00
SOLD
This is an untouched, attic-condition, all-original example of the British P1853 Enfield, imported in large numbers by both sides in the Civil War, but bearing markings indicating it was specifically… (490-5711). Learn More »
This musket rates very good for condition and is great example of a U.S. flintlock musket produced on contract for the U.S. government and then altered to percussion at a U.S. government arsenal in… (480-327). Learn More »
This is an arsenal cut down Model 1854 Lorenz .54 caliber rifle-musket. Known as "Razee" carbines in official Confederate correspondence. The carbine measures 41 inches in total length. The barrel is… (88-186). Learn More »
$1,895.00
ON HOLD
Here is a good volume on European firearms imported to the United States during the Civil War. Book has colorful printed hard cover and is the extra large European “A4” size (measures 9.25” x… (236-842). Learn More »
$65.00
ON HOLD
Scabbard was designed solely for the M-1A1 folding stock carbine. Made of OD Green canvas the scabbard was slightly padded with a flap at top that was fastened by two lift-dot fasteners. The rear has… (1216-21). Learn More »
Small black leather holster made for a small model pistol like a Colt pocket or Bacon revolver. Leather is very thin but in good supple condition. Outer flap has a 5.00 inch long strap sewn to the… (1179-533). Learn More »
This Sharps rates Fine+ for condition. It is complete, with all original parts, over 30 percent original finish including full barrel coverage of blue turned plum, matching on the barrel band, sharp… (302-114). Learn More »
$5,500.00
ON HOLD
A colorful paper container with printed advertising and labels. Round label on the end reads, “ELEY’S / Improved Patent Wire Cartridge / No. 1”. Contains a wire “basket” filled with shot.… (1219-09). Learn More »
This is a complete non-dug cartridge for the 25-barrel Billinghurst & Requa Battery Gun. The brass cartridge case cylinder is closed with a machined base plug that contains an ignition hole. The… (1219-06). Learn More »
This is a black leather holster made to accommodate the Colt, Remington, and other revolvers. The leather still shows a slight “profile” of a revolver barrel and loading lever. A Colt .44 caliber… (1179-469). Learn More »
$450.00
ON HOLD
Iron scissor-type mold to cast a lead .38 caliber ball for the Winchester rifle. Single cavity mold with spout and a sprue cutter mounted on top of the mold blocks. Turned wood handles with brass… (160-203). Learn More »
This belt holster was made for a small revolver, likely a “pocket model” of some sort, very typical of those carried by infantry line officer as a sidearm for personal defense in addition to the… (1179-628). Learn More »
Single cavity iron bullet mold. Hinge style mold with sprue cutter mounted on top. Measures approximately 7.5” long overall. Clean and completely workable. Inspector’s initials “E.W.” on left… (160-207). Learn More »
Perfect example of a hard-to-find cartridge. This fine specimen is still encased in its protective outer wrapper, with orange label, and brown cloth pull tab. Many English revolvers from Adams, Kerr,… (1212-112). Learn More »
A lighter frame version of the M1886 with same chambering as the M1873. Made 1892-1941, This is number 216566, giving it a 1903 date of manufacture. In .38 caliber, with short magazine and half… (1140-63). Learn More »
Brothers Henry and Lewis Hammond tried to enter the Civil War military arms business by incorporating in mid-1863 and developing a breech-loading single-shot cartridge system. This met delays in… (490-4432). Learn More »
This is a .50 caliber copper rimfire cartridge. One of many profiles and sizes experimented with at the Frankford Arsenal following the Civil War. The search was for the most appropriate bullet,… (1212-146). Learn More »
This is a reloadable, steel shotgun shell. Patented by Sylvester Roper (#53,881) on April 10, 1866. This is the 410-gauge shell with its recessed head and percussion nipple. Measures 2.42” long.… (1212-229). Learn More »
This is a very fancy example of the Smith and Wesson 7-shot .22 caliber rimfire “tip-up” revolver using a nickeled frame, mother-of-pearl grips and inscribed backstrap. This is a Second Issue… (1179-110). Learn More »
This is a “pulp bag” of percussion caps as manufactured at the Royal Laboratory at Woolwich, England. Each pack was to contain 15 copper percussion caps. Packages are full of caps and twisted… (2023-2737). Learn More »
After the Revolution and before the adoption of the Federal Constitution, Virginia realized that she had no source of new arms. In 1785, when Patrick Henry was Governor of the state, the Council of… (1000-253). Learn More »
$4,000.00
Originally $5,000.00
In 1795 Virginia advertised for a contract to procure 4,000 muskets per annum. Colonel James Swan of Boston offered in September of 1796 to supply 4,000 musket per year for five years for a total of… (1000-289). Learn More »
$3,200.00
Originally $4,000.00
In 1795 Virginia advertised for a contract to procure 4,000 muskets per annum. Colonel James Swan of Boston offered in September of 1796 to supply 4,000 musket per year for five years for a total of… (1000-245). Learn More »
$3,025.00
Originally $3,800.00
Colt introduced their “New Line” of revolvers in 1873. There were designed by William Mason and ultimately came in five different models in calibers from .22 to .41, all using solid frames, spur… (490-4430). Learn More »
This powder charge is in very good condition. Measures 2” long. Fine gray cartridge paper is tied closed at both ends, however there is also a typical folded tail. A blank musket charge that could… (1212-176). Learn More »
This cartridge is in good condition, with two small cracks at the base of the ball. Measures 2.75” long. Course cartridge paper is pasted closed over the ball. The powder end is closed with the… (1212-136). Learn More »
This cartridge is in excellent condition. Measures 1.9” long. Lubricated over bullet with end tucked into the bullet cavity. These “expanding ball” cartridges were for the Swiss Model 1842… (1212-184). Learn More »
Made of tin this unusual item is listed in Wert’s catalog as a powder measure. It measures 1 5/8 inches deep with a rounded bottom and is 1 ¼ inches in diameter. It has the catalog number 111 on… (224-796). Learn More »
Made of tin this unusual item is listed in Wert’s catalog as a powder measure. It measures 1 ¾ inches deep with a rounded bottom and is 1 1/2 inches in diameter. It has the catalog number 111 on… (224-795). Learn More »
This is a reprint of the original 1878 edition that was in the collection of Herschel Logan. A high-quality reprint from Armory Publications. 7.5” x 11” x 2.5”, unpaginated. Approximately 300… (236-724). Learn More »
After the Revolution and before the adoption of the Federal Constitution, Virginia realized that she had no source of new arms. In 1785, when Patrick Henry was Governor of the state, the Council of… (1000-252). Learn More »
$3,025.00
Originally $3,800.00
Joshua Barstow and son Charles of Exeter, NH, signed a U.S. contract for 2,500 muskets 21 October 1808, with 500 to be delivered to Fort Constitution at Portsmouth, NH, annually over a five-year term.… (1037-15). Learn More »
Here is a very nice French pasteboard percussion cap container, unopened and full of caps. Round package made of white pasteboard with green paper labels affixed. A white paper label was pasted along… (1212-250). Learn More »
Here is a very nice French pasteboard percussion cap container, unopened and full of caps. Round package made of white pasteboard with green paper labels affixed. A white paper label was pasted along… (1212-210). Learn More »
This is a Thuer’s Patent metallic centerfire cartridge. This short .31 caliber cartridge is in good original condition and was for the Colt Thuer conversion “Pocket” revolver. These were… (1212-23). Learn More »
$75.00
ON HOLD
This musket is stamped “42. VA. REGT. PITTSYLVANIA” on the barrel, was later altered to percussion and then shortened for use in the civilian market. It is a scarce survivor from muskets delivered… (1000-241). Learn More »
Dark blue web belt with a single row of sewn loops for holding ammunition. Belt meas. approx. 3.00 inches wide by 40.50 inches long including the plate. Belt has four centrally mounted grommets on the… (998-849). Learn More »
$200.00
Originally $275.00
This Civil War era single-shot muzzleloader is a .58 caliber Springfield Model 1855 percussion rifle-musket in very nice overall condition. Longarm has a 40” round barrel with broad three-groove… (987-10). Learn More »
$3,200.00
Originally $3,650.00
This is an original .69 caliber Buck & Ball cartridge. Composed of a .69 caliber round ball with three .31 caliber buckshot on top. Wrapped in cartridge paper and tied with string between each… (2023-2033). Learn More »
The breechloading Model 1841 Hall rifle retained the .52 caliber 32 5/8” rifled barrel of the Model 1819, but finally caught up with Hall carbines in the use of percussion priming. These are fairly… (490-3498). Learn More »
This is a Thuer’s Patent metallic centerfire cartridge. This short .36 caliber cartridge is in excellent original condition and was for the Colt Thuer conversion “Pocket Navy” revolver. These… (1212-24). Learn More »
This is a Thuer’s Patent metallic centerfire cartridge. This .44 caliber cartridge is in excellent original condition and was for the Colt Thuer conversion “Army” revolver. These were designed… (1212-26). Learn More »
$225.00
ON HOLD
This is a cased display set of reproduction Crispin cartridges as given out at the 2005 California Cartridge Collectors Show. Foam-filled plastic case holds five different Crispin cartridges made for… (1212-251). Learn More »
This is the iron stem from a T-handle nipple wrench. There would have been a wood handle attached to this piece forming a “T”. Measures approximately 2.5" long overall. Square shank on one end;… (490-4398). Learn More »
Socket end with two screwdriver blades. Blades are stiff but will separate. The longer of the two blades has a small chip in the edge of the face otherwise the item is in very nice condition. [AD]… (286-1264). Learn More »
Model 1841 Cadet Musket was produced at Springfield Armory between 1844 and 1845. This is one of only 450 of these weapons produced. Intended for the Corps of Cadets at West Point. This is a .57… (1000-138). Learn More »
$6,800.00
Originally $8,500.00
This weapon is a single shot, muzzle loading, .69 caliber smoothbore musket manufactured at the US armory in Springfield. Originally produced as a flintlock it was converted to percussion by the… (1000-114). Learn More »
$2,000.00
Originally $2,500.00
Gilbert Smith of Buttermilk Falls, NY, received patent #17,702 in June of 1857 for his invention of a cartridge case made of India rubber. All should be familiar with the .50 caliber Smith carbine… (1212-181). Learn More »
This style of cartridge was originally made prior to the Civil War and eventually replaced in the North by the “New Model” linen cartridges. However, the simple method of just tying the plain… (1212-87). Learn More »
Here is a very rare 60-Bore Sharps cartridge with a multi-groove bullet by Gomez and Mills. This cartridge is in fine condition. The paper is crisp, and you can clearly see where another cartridge… (1212-85). Learn More »
"Seamless" skin cartridges were made by D.C. Sage under the Hotchkiss patent of 1862. Mutton or hog's intestine was spirally wound around a former so that the seams crossed perpendicular to each other… (1212-111). Learn More »
This musket follows the general lines of a British Short Land Pattern musket, but bears no British maker, ordnance, or proof marks. The lock is a two-screw lock with gooseneck hammer, rounded pan and… (1000-0255). Learn More »
$6,000.00
Originally $7,500.00
This nice looking imported musketoon likely arrived in the U.S. courtesy of American purchasing agents scouring Europe for arms in 1861 and 1862. This is smoothbore, .70 caliber, with an overall… (998-27). Learn More »
$1,650.00
Originally $1,950.00
ON HOLD
U.S. patent #8956 was granted to William W. Marston & Frederick Goodell on May 18, 1852 for this cartridge. It was intended to be used in a breech-loading single shot firearm of Marston's design,… (1212-226). Learn More »
Scarce .36 caliber Savage cartridge for Navy revolvers. Here is a cartridge that is rarely offered for sale in this fine condition. This style of cartridge was made by D.C. Sage of Middletown, CT.… (1212-114). Learn More »
Rarest of the rare, a .44 caliber cartridge for Joslyn Army revolvers. A pointy, two-groove bullet with paper case tied to the bullet. After filling with powder, the case was “choked and tied at the… (1212-92). Learn More »
Included in a wood display case is a cartridge wrapper from Selma Arsenal dated July 1864, seven complete cartridges, and a pack of percussion caps. The cartridges and caps came out of this… (1000-743). Learn More »
$2,800.00
Originally $3,500.00
The full title of this volume is “ELEY CARTRIDGES: A HISTORY OF THE SILVERSMITHS AND AMMUNITION MANUFACTURERS” by C. W. Harding and published by Quiller Press of Wykey, Shrewsbury, England in… (236-469). Learn More »
Just two thousand of these flasks were contracted for by James Baker of Philadelphia in 1825 and delivered by 1827. They were for use with military rifles, particularly the common rifle of 1817,… (1000-708). Learn More »
$440.00
Originally $550.00
Moore revolvers used the .32 caliber self-contained metallic rimfire cartridge, which was available and convenient. They were not subject to damage by rough handling, weather resistant, and made a… (2023-2603). Learn More »
This 1862 dated Springfield is both in very good condition and bears a “Q” stamping on the underside of the stock just forward of the triggerguard tang that is now recognized as the final… (490-2845). Learn More »
This small pistol flask is embossed with an attractive pair of oak leaf and acorn clusters in the top quarter, below which a long, thin, scrolling chevron with dots separates it from a pair of knotted… (490-5380). Learn More »
Excellent-plus condition with 90 percent or better original finish, including on the hammer, strong blue and vivid case colors. Excellent, sharply checkered hard rubber grips with the rampant colt at… (490-5576). Learn More »
Nice, clean, tight, copy of the above titled book. Volume was written by John M. Murphy with supplemental research done by Howard Michael Madaus and published in 2002. The volume runs 320 pages with… (236-487). Learn More »
This Colt Special Model 1861 musket was made under government contract from 1861 to 1865 by the Colt Manufacturing Co. of Hartford, Connecticut. Longarm is a .58 caliber, single-shot muzzleloader with… (1099-31). Learn More »
This original Civil War shoulder arm is a Colt “Special Model 1861” contract rifle musket made from 1861 to 1865 by the Colt Manufacturing Company of Hartford, Connecticut. Though no serial… (490-2956). Learn More »
$2,850.00
ON HOLD
This untouched, unrestored attic condition Civil War Sharps carbine is typical of the finds we used to make years ago in the attics of veterans or their families. It shows wear and field use, is… (622-433). Learn More »
$2,450.00
ON HOLD
Brass powder flask in good condition. The body has one small ding at bottom with a small seam opening. The decoration on the flask consists of a spread-winged eagle above a circle of 20 five-pointed… (160-170). Learn More »
By John Barber. Armory Publications, Tacoma, Washington, 1987. Hard cover, blue cloth with gold titles on cover and spine, 221 pages, index. First edition. No dust jacket. Heavily illustrated.… (236-393). Learn More »
This small brass powder flask is decorated with a stamped design of a pheasant in amongst some cattails and weeds. Decoration is present on both sides of the flask. Flask meas. approx. 3.50 inches… (160-167). Learn More »
Title is by T. Dennis Glazener and published by him in 2004. Book is soft cover and meas. approx. 8.50 x 11.00 inches and runs 76 pages. Covers are clean as is the interior. The book is profusely… (34-183). Learn More »
Small iron scissor-type mold with sprue cutter between both handles. At the end of one handle is a cork screw-like “wiper” and a flat “ramrod” on the end of the other. Measures approximately… (1146-126). Learn More »
Scarce .44 caliber Army revolver cartridge manufactured based on the specifications set forth in the 1861 Ordnance Manual. These were arsenal-made and are very hard to find! This was for use in Colt,… (34-225). Learn More »
$125.00
ON HOLD
This is very small powder flask, possibly of European manufacture and perhaps made on contract for an American retailer, intended for a pocket revolver or small single shot pistol. Measures… (490-5248). Learn More »
An original Springfield Model 1858 Cadet rifle musket in .58 caliber in nice condition. Metal surfaces appear to have been cleaned and are bright. The 38.00-inch barrel has a surface that wears a… (490-3489). Learn More »
U.S. Model 1842 muskets that were rifled and given long-range rear sights saw service particularly in the early Civil War when arms were in short supply for the immense number of new volunteers and… (490-4633). Learn More »
This is very small powder flask, possibly of European manufacture and perhaps made on contract for an American retailer, intended for a pocket revolver or small single shot pistol. Measures… (490-5247). Learn More »
The first rods for Krag carbines were two-piece. The three-piece rods were introduced in 1896 and the carrying compartment in the buttstock of the rifle and carbine were accordingly altered to carry… (2022-1783). Learn More »
Title is “GUNSMITHS OF WESTERN PENNSYLVANIA VOLUME 1” by Thomas J. Metzgar and James B. Whisker. Published by Old Bedford Village Press of Bedford, Pennsylvania in 1998. Volume is hardcover and… (798-74). Learn More »
This flask is for early pocket model revolvers. Constructed with a copper body, with brass top and spout. Measures approximately 4.75” tall x 2” at widest point. Both sides are plain. Thumb tab… (490-5245). Learn More »
This attractive and unusual piece is a three-compartment powder flask. The unadorned body is copper while the top and bottom are of brass. Thumbpiece and spring are complete and in place. The spout is… (490-5244). Learn More »
Brass, two cavity bullet mold for the .28 caliber "Root" Colt revolver. It casts one round ball and one elongated bullet. Iron sprue cutter is attached to the top and is lightly marked "COLT'S /… (490-4366). Learn More »
Iron, two cavity bullet mold for the .31 caliber revolver. It casts one round ball and one elongated bullet. There is no sprue cutter. Cavities remain clean and crisp. There are several small dings on… (490-4365). Learn More »
Iron, two cavity bullet mold for the .31 caliber revolver. It casts one round ball and one elongated bullet. There is no sprue cutter. There are several small dings on exterior where the mold needed… (490-4364). Learn More »
Brass, two cavity bullet mold for 120 gauge (approx. .31 caliber) English Adams revolver. It casts two elongated bullets. These feature a pointy nose, two grooves, and a solid base. Iron sprue cutter… (490-4378). Learn More »
Mainspring vise for the many types of early muskets that were converted to percussion ignition. Typical vise mechanism with offset bar to accommodate the older flintlock mainsprings. Excellent… (490-4363). Learn More »
This is the Model 1847 “Artillery” Musketoon, produced by the Springfield Armory circa 1848 to 1859, with a total production of 3,359. The musket is a .69 caliber, smoothbore, single-shot… (490-4627). Learn More »
$2,500.00
ON HOLD
This horn likely dates to roughly 1750 to 1825 or so, and follows a classic York County style with a domed wood base plug with turned grooves. It features two fine lines turned around the base of the… (490-4338). Learn More »
$495.00
ON HOLD
Constructed with plain copper body and brass top. Funnel unscrews and spring still works. Measures approximately 4.5" tall x 1.5" wide x 1" thick. All surfaces are unadorned, with sides that have… (490-4416). Learn More »
Unusual flask with side-by-side compartments for black powder and bullets. There is also a small third compartment on the bottom to hold extra flints. Constructed with copper body and brass top and… (490-4415). Learn More »
$450.00
SOLD
Iron, two cavity bullet mold for the .45 caliber Colt Model 1878 revolver. It casts two elongated bullets with grooves. These are the “.45 Long Colt” bullets. Sprue cutter is attached to the top… (490-4399). Learn More »
This percussion Pennsylvania/Kentucky style rifle bears a small “US” stamp in the wood just below the triggerguard, placing it in the category of a “treaty rifle” acquired by the government as… (30-2261). Learn More »
Offered here is an early gang mold for round shot of varying calibers. Made of brass and measuring just over 8.5" long with the reproduction wood handles attached. Hinged at one end with long tapered… (490-4387). Learn More »
$295.00
ON HOLD
Mainspring vise for the many types of early muskets that were converted to percussion ignition. Typical vise mechanism with offset bar to accommodate the older flintlock mainsprings. Excellent… (490-4380). Learn More »
Iron, two cavity bullet mold for the .44 caliber Colt Army revolver. It casts one round ball and one elongated bullet. Sprue cutter is attached to the top and is marked "COLT'S / PATENT". Cavities… (490-4376). Learn More »
$195.00
ON HOLD
This is very small powder flask, likely of European manufacture and perhaps made on contract for an American retailer, intended for a pocket revolver or small single shot pistol. The copper body… (30-2250). Learn More »
$200.00
Originally $295.00
This powder flask was certainly made for the American market. The bottom is fitted with two small, round hinged covers for interior compartments, each with an eagle with raised wings, a U.S. shield on… (30-2245). Learn More »
$575.00
Originally $695.00
The black leather of the holster is somewhat stiff but can be coaxed to take a weapon. The leather surface shows light crazing throughout. The holster has a rather wide flap with two parallel rows of… (490-3203). Learn More »
This is a black leather holster made for revolvers. The leather still shows the faint “profile” of a revolver cylinder and barrel. A .31 caliber “pocket” model Colt fits into this holster. The… (2022-1071). Learn More »
Very rare iron, two cavity bullet mold for the .31 caliber "Wells Fargo" Colt revolver. It casts one round ball and one elongated bullet. There is no sprue cutter. Marked "COLT'S / PATENT" across the… (490-4400). Learn More »
Model 1842, .69 caliber musket manufactured at Springfield, Mass. The barrel is a full 42” in length and in overall good condition with brown tone. Pitting around breech and bolster area with date… (1195-01). Learn More »
The full title of this volume is “THE KENTUCKY RIFLE; A TRUE AMERICAN HERITAGE IN PICTURE” by The Kentucky Rifle Association and published by Forte Group of Alexandria, Virginia in 1985. The… (1032-132). Learn More »
The full title of this volume is “AMERICAN MILITARY SHOULDER ARMS – VOLUME 1: COLONIAL AND REVOLUTIONARY WAR ARMS” by George D. Moller and published by University Press of Colorado in 1993. The… (1032-131). Learn More »
Offered here is a lot of nine pinfire shotgun cartridges. One is loaded, all others are unused, empty shells waiting to be filled. The one loaded shell has raised “ELEY LONDON / 12 / 1861” on the… (M23280). Learn More »
This is great early western Colt center-fire .44 caliber revolver of the 1870s in good condition. The Colt Richards conversion of the 1860 Army was produced starting in 1871 following the expiration… (490-3461). Learn More »
$3,600.00
ON HOLD
Hard to find, this is a non-regulation leather holster made to accommodate a large revolver such as a Colt or Remington “Army” revolver. The holster measures 12” along the front edge. Holster is… (1052-209). Learn More »
This follows the pattern generally termed the Model 1854, but there were variations. Holding six pinfire 12mm (about .47 caliber) cartridges loaded in the cylinder through a side loading gate and… (2022-2415). Learn More »
This Moore revolver rates very good for condition with little finish left on the barrel assembly, common for Moores from grabbing it there to swing out the barrel assembly and the chamber for loading,… (490-4155). Learn More »
A much-used appendage for Civil War muskets. This wiper would be screwed on to the threaded end of a ramrod and used to “pull” bullets or to extract cartridge paper and cleaning patches. This… (30-2256). Learn More »
$75.00
ON HOLD
This is a pretty powder flask with an adjustable spout and brown lacquered body impressed with a basket weave design on the faces and leaves curling up on either edge, with small brass suspension… (1184-74). Learn More »
Good condition, plain body powder flask with prominent edge seam and adjustable spout measured in drams. Stamped “G.& J.W. HAWKSLEY / SHEFFIELD” on the top of the collar. Constructed with… (1184-71). Learn More »
These rare military arms were produced by Henry Deringer of Philadelphia between 1810 -1820. Overall this weapon meas. approx. 54.00 inches long. The octagon barrel is approx. 38.00 inches long and… (911-57). Learn More »
$4,675.00
Originally $5,200.00
Below is a list of the bayonets included in the above photos, from top to bottom. Please refer to the individual item#'s when asking questions or placing an order. ITEM# BAYONET… (490-). Learn More »
Offered here is a rare hinged clip for the Billinghurst-Requa Battery Gun. This is a 36” long piece that was made to hold 25 cartridges at once. Its condition is good with only some light surface… (2022-2886). Learn More »
This is a good example of the US Model 1816 pistol by Simeon North with the first type lock markings and is clearly stamped along the top of the barrel near the breech S. CAROLINA, indicating it went… (766-1740). Learn More »
$2,750.00
Originally $3,200.00
This is an original Swedish Model 1815 Dog Lock Musket of about .75 caliber. A "Dog Lock" is a flintlock with a lever catch on the lock plate that engages the hammer at half cock. This acts as a… (766-1714). Learn More »
$1,350.00
Originally $1,650.00
This heavy, full-stock, percussion, .69 caliber, musket was originally a Model 1816 flintlock, smoothbore musket. It was altered to percussion ignition. A new Remington Arms Company Maynard-style… (490-2957). Learn More »
The Model 1841 Cadet musket was made by the Springfield Armory between 1844-1845 with a total of only 450 produced. These weapons were made in .57 caliber with a 40” round barrel. Metal surfaces are… (490-3481). Learn More »
This is very good example of the single-shot, breech-loading .52 Caliber rimfire Sharps and Hankins Navy Carbine, also known as the Model 1862, complete, all original, with a crisp action, clean and… (172-5792). Learn More »
By George N. Hyatt. Published by George Shumway, York, PA, 1964. 2nd Printing. 559 pp., 262 rifle ills. Cream glazed cloth, 9.25 x 12, black spine lettering. Exhibits light wear at the extremities.… (1032-127). Learn More »
This is a Model 1842, .69 caliber, musket manufactured at the Harpers Ferry armory. These were made from 1844 to 1855 and just over 100,000 were made at Harpers Ferry. This example is in “minty”… (490-3468). Learn More »
This powder horn uses a flat base plug secured to the body with brass tacks and mounts a simple brass finial for a strap or cord. The body is solid, with no cracks or wormholes and shows as a… (1184-76). Learn More »
This Pennsylvania rifle is in original flintlock configuration, full length and stocked to the muzzle. The four-piece patchbox has a plain, unengraved door, wavy edges to the side plates, and an oval… (490-2962). Learn More »
This is a Smith & Wesson, No. 2, Old Model Army Revolver. It is a .32 caliber, six-shot revolver with a 5” octagonal barrel and rosewood handles. Post-Civil War serial number of 39070.… (1179-103). Learn More »
By Jack Dunlap. Pacific PB Books, Palo Alto, CA., 1964. [Reissue 1967]. 279pp, figures & ills, dust jacket. In gray glazed cloth, 11.25 x 8.5, w/red cover ornament and black cover and spine… (1032-130). Learn More »
A wood tompion for a cavalryman’s .54 caliber Burnside carbine. This has the characteristic ball top, pointed tip, and cruciform slotted body of the Burnside tompions. They are occasionally seen in… (490-3945). Learn More »
This has a wonderful profusion of design elements that seems to combine rococo foliate C-scrolls symmetrically arranged with some geometric ornaments- something in the “too much is not enough”… (1184-75). Learn More »
A nicely decorated sportsman’s powder flask decorated in two panels with a hunting dog at top and the hunter’s prey at bottom: two stags with prominent antlers standing over a row of five less… (1184-73). Learn More »
This first model Bacon Pocket Model rates excellent for condition. The metal is smooth throughout and the barrel, loading assembly, hammer and cylinder have lots of blue finish remaining. The screw… (218-578). Learn More »
$1,695.00
Originally $1,795.00
The .41 caliber “Swiss” cartridge is a 10.54mm rimfire rifle cartridge. This specimen has a copper case with a “U” headstamp. Round-nosed lead bullet features two grooves. The most… (2022-923). Learn More »
Here we have a killer Smith & Wesson Model 1 Second Issue. Although this seven-shot revolver has seen much use, it’s seen the trials and tribulations of a soldier in the defenses of Washington,… (490-2969). Learn More »
$4,500.00
ON HOLD
Tool used for removing the mainspring from the lock. Very good condition. Operates properly. [ad] [PH:L] ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ THIS ITEM, AS WITH ALL OTHER ITEMS AVAILABLE ON OUR WEB… (179-1173). Learn More »
$93.00
ON HOLD
Using a truncated stock not extending past the lock and a barrel fitted with a lug at the bottom breech to allow it to be unscrewed for loading, these pistols became popular in the reign of Queen Anne… (490-3434). Learn More »
This elegant pistol flask was likely made by the American Hard Rubber Company in the 1850s and is marked in fine letters near the neck, “Goodyear’s Patent May 6, 185[1.]” The final digit being… (1184-64). Learn More »
Brown, Rodger. 2022. Hardback, 6 x 9 ¾”. 96 pages; numerous b&w photos and illustrations. During the Revolutionary War, both armies in the conflict were armed with muzzleloading smoothbore… (ST501205). Learn More »
This horn dates roughly 1820-1850. It is a plain, working powder horn only about 5 ¼ inches long, a size sometimes thought to be just for priming powder for a flintlock, but convenient enough to be… (1184-79). Learn More »
This horn dates roughly 1820-1850. It is a plain, working powder horn only about 5 3/4 inches long, a convenient size for pocket or hunting bag. Sometimes considered a small horn just for priming… (1184-77). Learn More »
Springfield was designated one of two US armories for the manufacture of arms in 1794 and production of the “US muskets, Charleville pattern” (designated the Model 1795 by collectors for… (1052-68). Learn More »
This is very good example of a Richmond Type-II rifle musket made in mid-1862 showing the beveled low-hump lock plate introduced in March 1862 and using the early 1862 die strike replaced later in the… (490-2958). Learn More »
This Smith carbine has lots of original blue on the barrel and some good case color on the left frame with crisp markings: “MANUFACTURED BY / MASS. ARMS CO / CHICOPEE FALLS. ” forward, and… (490-3788). Learn More »
Used in the Smith carbine extensively during the early years of the Civil War, we have several specimens of these unusual .50 caliber “rubber case” cartridges in excavated “relic”… (2022-1238). Learn More »
This is a non-excavated model 1842 musket tool. Two screw driver blades with a box-end wrench. Clearly stamped “US” on the neck. Originally designed for the Mississippi rifle. Iron is clean with… (490-3681). Learn More »
Springfield Armory manufactured 1,202 .54 caliber smoothbore flintlock carbines for the Indian Department between 1807 and 1810. The carbines were intended as gifts for the Native American tribes, but… (1052-97). Learn More »
Serial number 70464, this Model 1892 Winchester is .38 WCF, was made in 1894, and rates near Fine for overall condition with 80% thin shiny blue on the receiver, stronger on the right, with some… (169-533). Learn More »
J.P. Moore was in the gun business in New York from 1822, and the firm existed under several names until about 1870. Moore’s are study and collecting area of their own. Moore sold the U.S.… (1175-02). Learn More »
This Combination Tool was used for the standard Springfield musket. It was a widely used tool during the Civil War. It has an open cone wrench and two screwdrivers. It is approximately 3.5” long.… (2022-964). Learn More »
$39.50
ON HOLD
This small copper and brass flask is in near mint condition with a very pleasing brown lacquer tone to the copper body, medium untouched patina to the brass collar and spout, and vibrant blue to the… (30-2246). Learn More »
Longarm specimen is an original M1816, dated 1818. Although the lock does not bear the maker’s name we know it was made by Pomeroy of Pittsfield, Massachusetts. Musket is a .69 caliber, single shot… (1037-05). Learn More »
This Remington is a scarce factory conversion to .46 metallic cartridge done between September 1868 and April 1869, one of 4,540, and on the right frame bears the large “C.A.” stamp of the… (490-1661). Learn More »
This is a scarce example of a privately purchased belt holster with a military style flap to carry a small .31 caliber percussion revolver, typical of those carried for personal defense by officers… (480-221). Learn More »
$446.00
Originally $495.00
This double-action Starr revolver is complete, all original, and rates about Excellent for condition, with better than 80 percent original finish, sharp lettering numbering, and very pretty, unmarred… (490-2988). Learn More »
This large book covers infantry small arms manufactured in the Confederacy between 1861 and 1865. Highly detailed and illustrated with considerable new in-depth research. An absolute must have… (2022-585). Learn More »
This M1861 rifle musket recently came out of North Carolina. Stock markings and at least one barrel band show it to have been captured and reissued by Confederate ordnance authorities. Some minor… (490-2428). Learn More »
$2,600.00
Originally $3,250.00
Black leather saddle holsters for the large and heavy Colt Dragoon pistols. Overall, the leather is in good condition but the yoke between the holsters shows heavy surface finish loss. Each side of… (490-2779). Learn More »
This is a nice brown leather “Slim Jim” holster for M1851 and M1861 Colt Navy conversions. Holster body is one piece sewn down the back seam. Stitching remains strong and unbroken. Geometric… (1142-128). Learn More »
Wooden shipping crate for 10 sharps carbines. Crate is missing the lid but is marked on one end with a clear date of “AUGUST 1876.” The same edge has some faint markings that look to read “10… (172-5755). Learn More »
Priced to Sell – These are non-excavated cartridges for the .50 caliber Maynard carbine. Lead bullet with flat nose and a single groove in a brass case with large disc soldered to the bottom. A… (490-768). Learn More »
Some 200,000 thousand firearms captured or collected by CS Ordnance teams and civilians, along with perhaps another 50,000 turned in by CS units, went through the cleaning and/or repair… (1164-13). Learn More »
$3,250.00
ON HOLD
There are no appreciable differences between the NM1863 and NM1865 Sharps other than the stamped model designation by the company, and its occasional absence, which some have speculated was due to… (490-2531). Learn More »
Sharps Model 1855 arms are scarce. Just under 1,000 went to the American market: 600 US Army carbines (on two contracts of 400 and 200 guns each,) about 350 Navy rifles and carbines, and a dozen or… (490-2664). Learn More »
Iron scissor-type mold to cast a lead round ball for revolvers. Measures approximately 3.5” long overall. Single cavity mold with spout. Sprue cutter is formed between the two handles. Cavity… (1164-46). Learn More »
This original German longarm is a .72 caliber, Potsdam Model 1809 smoothbore musket in good condition. Musket measures a total length of almost 56.25” with a 41.25” long barrel and has been… (172-5783). Learn More »
Here is an original, seldom-seen Frank Wesson single-shot breechloader in excellent condition, one of the best that we have handled. This 1st Type, twin-trigger, .44 caliber rimfire, Wesson rifle made… (779-09). Learn More »
This is a Model 1861, .58 caliber, percussion rifle musket in good condition. Produced by E. Remington & Sons, Ilion, New York. Remington produced 40,000 rifles from 1864 to 1866. All gun metal on… (172-5729). Learn More »
This very large flask has to have been for shotguns. Constructed with a copper body, with brass top and spout. Measures approximately 11” tall x 5” at widest point. Unadorned body. Thumb tab and… (172-5639). Learn More »
This flask is for early pocket model revolvers. Constructed with a copper body, with brass top and spout. Measures approximately 6” tall x 2.75” at widest point. Both sides are plain. Thumb tab… (172-5638). Learn More »
This is a black leather holster made for revolvers. The leather still shows the “profile” of a revolver cylinder and barrel. A .31 caliber “pocket” model with long barrel fits into this… (172-5636). Learn More »
This is a Smith & Wesson, No. 2, Old Model Army Revolver. It is a .32 caliber, six-shot revolver with a 5” barrel, rosewood handles. Post-Civil War serial number 60737. Production began in 1861,… (1000-452). Learn More »
This is a tool for clearing the vent of any obstructions. It has an octagonal head with a hole in the center, and a 17” wire brazed to it. The wire comes to a point at the end. The flat head is… (1117-46). Learn More »
Fabricated by Ludlow Brothers of Birmingham, England. Nice display in a 8.25” x 12.25” Riker case. Photocopy of an original wrapper at top with info sheet below, and then the cartridge at the… (M24055). Learn More »
Iron bullet mold measures approximately 7 ½” long. Two halves pinned with rivet and has floating sprue cutter. Iron is pitted but not badly; could be “dug” or out of a barn. Still opens and… (1117-238). Learn More »
This is a black leather holster made to accommodate the Kerr revolver. The leather still shows the “profile” of a revolver cylinder. The holster “pocket” measures approximately 9 ¼” along… (1117-97). Learn More »
Scissor-type mold made of brass. Casts a .44 caliber “picket” or “sugarloaf” style of bullet with rounded base. Measures 6 ½” overall. Brass has a blotchy, dark patina. … (1117-234). Learn More »
This is a “pulp bag” of percussion caps as manufactured at the Royal Laboratory at Woolwich, England. Each pack was to contain 15 copper percussion caps. Packages are full of caps and twisted… (M25673). Learn More »
This contract Model 1861 by the Norwich Arms Company is in good condition with a very clear and unmistakable “Q” stamped just forward of the trigger guard showing that it was captured, cleaned and… (362-866). Learn More »
Made from about 1871-1877 this revolver is .22 with a 2 3/8 inch barrel. Barrel is nickel plated. Top has a strong two line stamping flanked by Maltese crosses. Stamping reads “COLT’S PAT. F. A.… (911-19). Learn More »
$800.00
Originally $1,000.00
Pasteboard box covered with a marbled wrap and green label and tape. Box held fifty “No. 46” rimfire cartridges. Box only no cartridges remain. Green label on top shows wear but remains in good… (172-5462). Learn More »
Both the .45 caliber Colt and the Schofield Smith and Wesson were issued to the cavalry and it made sense to devise a holster that would hold either one. The solution was to provide alternate… (172-5401). Learn More »
This is a brown leather belt holster in good condition for a Colt .32 caliber percussion pocket revolver with a 5-inch barrel. The holster is a simple three-piece construction of the body and flap in… (172-5400). Learn More »
Several holsters of this configuration for navy size revolvers are illustrated in Meadows and are seen in period photos. They key point of identification is the use of an elongated flap extending in… (172-5395). Learn More »
Knott, USN (ret.), Capt. Steven W. Published by The Horse Soldier, 2019. Softcover, 80 pp., heavily illustrated with color photographs. This monograph examines the Confederate system used to recover,… (ST501179). Learn More »
***NEWLY REVISED EDITION, JUST ARRIVED FROM THE PRINTER!*** Written by Capt. Steven W. Knott, USN (Ret). Softcover, 54 pages. Contains minor corrections from the first edition, as well as a new… (ST501177). Learn More »
A fine H.H. Heiser holster for a weapon with a 5.50 inch barrel or shorter. Brown saddle leather with a nice buckskin wrap. Snap, button and strap are in excellent condition. Snap is marked with the… (172-4968). Learn More »
Dark worn paper cartridge with conical bullet in nose. The body of the cartridge is complete but the paper looks weary. The tail has separated from the cartridge due to age and weakness of the… (169-280). Learn More »
$200.00
Originally $250.00
Pritchard, Jr., Russ A. and John W. Ashworth, Jr. with Liza Bryson, Tim Prince and W. C. Smith, III. Hardback, 383 pp. Heavily illustrated with color photographs. Confederate & Southern Agent… (ST501172). Learn More »
“Right Hand” holster, of black leather, with oval encircled “USN” stamped on upper flap, and three-rivet reverse belt loop. Measures 13.25” in length from top of flap to the tip, with pocket… (172-4495). Learn More »
Fabricated by Ludlow Brothers of Birmingham, England. Nice display in a 8.25” x 12.25” Riker case. Photocopy of an original wrapper at top with info sheet below, and then the cartridge at the… (M24051). Learn More »
Here is a round pasteboard box of primed cases for a 4mm Flobert pistol. Printed label on lid, printed red “tape” around side. Empty cases have “KC” headstamp. Good condition, but unknown… (172-4106). Learn More »
Top of box is stamped with, “250 FLOBERT- KAPSLELN, lange, CALIBER 4mm”. Lid lifts off to reveal over ninety pieces still remaining. Measures 2 ¾” across. Box is in very good condition with… (172-4108). Learn More »
Please click on the photograph above to view a flyer containing information regarding a Model 1860 Henry Rifle and pair of cased presentation Colt Revolvers identified to Secretary of War Simon…. Learn More »
Pack has the original brown wrapper and label but string is replacement. Top is cut and held in place by string. Lid can be lifted to view cartridges. Light blue label with black printing reads “10… (172-3989). Learn More »
Item is semi-bright with light scattered mottling. Back has small area of surface pitting, nothing major. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ THIS ITEM, AS WITH ALL OTHER ITEMS AVAILABLE ON OUR WEB… (689-92). Learn More »
$30.00
Originally $40.00
Small brown paper wrapped box that meas. approx. 3.00 inches long x 1.25 inches wide x 1.25 inches tall. Wrapper is in excellent shape and very clean. Original sting pull for opening the pack is still… (172-3543). Learn More »
$95.00
Originally $175.00
This tool is to be attached to the threaded end of the ramrod and used to clean debris out of the barrel. Good condition, light surface rust. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ THIS ITEM, AS WITH… (M24178). Learn More »
This tool is to be attached to the threaded end of the ramrod and used to clean debris out of the barrel. Good condition, light surface rust. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ THIS ITEM, AS WITH… (M24177). Learn More »
This original, breech-loading carbine, is one of only some 14,500 weapons produced by H. Merrill of Baltimore, MD. The cavalry shortarm is a wartime example of the Second Type Merrill carbine with a… (172-3352). Learn More »
This firearm was shipped to one of our customers who never received it. It was tracked as far as the Cleveland area. We are offering a $250.00 reward for its safe return. Thank you. 70,000… (667-24). Learn More »
$3,950.00
ON HOLD
Good clean condition. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ THIS ITEM, AS WITH ALL OTHER ITEMS AVAILABLE ON OUR WEB SITE, MAY BE PURCHASED THROUGH OUR LAYAWAY PROGRAM. FOR OUR POLICIES AND TERMS, CLICK… (689-88). Learn More »
Carbine sling swivels attached to the swivel ring on the carbine and to the leather strap worn over the shoulder. This prevent the carbine from being dropped or lost. These are surplus swivels that… (ST500229). Learn More »
CLEANS, RESTORES AND PROTECTS YOUR VALUABLE OBJECTS & COLLECTIBLES We highly recommend this wax for protecting your antique firearms. "For over forty years, RENAISSANCE WAX polish from England has… (ST500752). Learn More »
Showing 1 to 251 out of 251
Historical Firearms Stolen From The National Civil War Museum In Harrisburg, Pa »
Theft From Gravesite Of Gen. John Reynolds »
Cavalry Carbine Sling Swivel »
Fine Condition Brass Infantry Bugle Insignia »
This article of uniform clothing is an original, Civil War example of headgear manufactured in the Confederacy and presented here in wonderful, original intact condition. The period artifact is a small, dark blue colored, wool kepi, suited for a… (526-68). Learn More »