site search
online catalog
Cartridges & Gun Tools
Showing 101 to 120 out of 125
SMALL HUNTER’S POWDER HORN
This horn dates roughly 1820-1850. It is a plain, working powder horn only about 5 ¼ inches long, a size sometimes thought to be just for priming powder for a flintlock, but convenient enough to be… (1184-79). Learn More »
SMALL HUNTER’S POWDER HORN
This horn dates roughly 1820-1850. It is a plain, working powder horn only about 5 3/4 inches long, a convenient size for pocket or hunting bag. Sometimes considered a small horn just for priming… (1184-77). Learn More »
“DUG” .50 CALIBER SMITH “RUBBER CASE” CARTRIDGES
Used in the Smith carbine extensively during the early years of the Civil War, we have several specimens of these unusual .50 caliber “rubber case” cartridges in excavated “relic”… (2022-1238). Learn More »
U.S. MODEL 1842 “MISSISSIPPI RIFLE” GUN TOOL MARKED “US”
This is a non-excavated model 1842 musket tool. Two screw driver blades with a box-end wrench. Clearly stamped “US” on the neck. Originally designed for the Mississippi rifle. Iron is clean with… (490-3681). Learn More »
CIVIL WAR M1861/63 MUSKET WRENCH
This Combination Tool was used for the standard Springfield musket. It was a widely used tool during the Civil War. It has an open cone wrench and two screwdrivers. It is approximately 3.5” long.… (2022-964). Learn More »
$39.50
ON HOLD
SYKES MARKED FLASK FOR POCKET OR MUFF PISTOLS
This small copper and brass flask is in near mint condition with a very pleasing brown lacquer tone to the copper body, medium untouched patina to the brass collar and spout, and vibrant blue to the… (30-2246). Learn More »
WOODEN CRATE FOR SHARPS CARBINES DATED AUGUST 1876
Wooden shipping crate for 10 sharps carbines. Crate is missing the lid but is marked on one end with a clear date of “AUGUST 1876.” The same edge has some faint markings that look to read “10… (172-5755). Learn More »
.50 CALIBER MAYNARD CARTRIDGES
Priced to Sell – These are non-excavated cartridges for the .50 caliber Maynard carbine. Lead bullet with flat nose and a single groove in a brass case with large disc soldered to the bottom. A… (490-768). Learn More »
.45 CALIBER IRON PISTOL BALL MOLD & BARREL TOOL
Iron scissor-type mold to cast a lead round ball for revolvers. Measures approximately 3.5” long overall. Single cavity mold with spout. Sprue cutter is formed between the two handles. Cavity… (1164-46). Learn More »
VERY LARGE POWDER FLASK BY J. DIXON & SONS, SHEFFIELD
This very large flask has to have been for shotguns. Constructed with a copper body, with brass top and spout. Measures approximately 11” tall x 5” at widest point. Unadorned body. Thumb tab and… (172-5639). Learn More »
POWDER FLASK FOR REVOLVERS
This flask is for early pocket model revolvers. Constructed with a copper body, with brass top and spout. Measures approximately 6” tall x 2.75” at widest point. Both sides are plain. Thumb tab… (172-5638). Learn More »
ARTILLERY VENT PUNCH FOR 10-INCH GUN – WATERVLIET ARSENAL
This is a tool for clearing the vent of any obstructions. It has an octagonal head with a hole in the center, and a 17” wire brazed to it. The wire comes to a point at the end. The flat head is… (1117-46). Learn More »
.577 CALIBER ENGLISH ENFIELD PATTERN CARTRIDGE
Fabricated by Ludlow Brothers of Birmingham, England. Nice display in a 8.25” x 12.25” Riker case. Photocopy of an original wrapper at top with info sheet below, and then the cartridge at the… (M24055). Learn More »
RELIC M1873 MAYNARD BULLET MOLD
Iron bullet mold measures approximately 7 ½” long. Two halves pinned with rivet and has floating sprue cutter. Iron is pitted but not badly; could be “dug” or out of a barn. Still opens and… (1117-238). Learn More »
BRASS BULLET MOLD FOR “PICKET” TYPE BULLET
Scissor-type mold made of brass. Casts a .44 caliber “picket” or “sugarloaf” style of bullet with rounded base. Measures 6 ½” overall. Brass has a blotchy, dark patina. … (1117-234). Learn More »
ENGLISH PERCUSSION CAP PACK
This is a “pulp bag” of percussion caps as manufactured at the Royal Laboratory at Woolwich, England. Each pack was to contain 15 copper percussion caps. Packages are full of caps and twisted… (M25673). Learn More »
BOX FOR 50 REMINGTON CARBINE CARTRIDGES – CRITTENDEN & TIBBALS
Pasteboard box covered with a marbled wrap and green label and tape. Box held fifty “No. 46” rimfire cartridges. Box only no cartridges remain. Green label on top shows wear but remains in good… (172-5462). Learn More »
.54 CALIBER CARTRIDGE FOR FAYETTEVILLE RIFLE
Dark worn paper cartridge with conical bullet in nose. The body of the cartridge is complete but the paper looks weary. The tail has separated from the cartridge due to age and weakness of the… (169-280). Learn More »
$200.00
Originally $250.00
.577 CALIBER ENGLISH ENFIELD PATTERN CARTRIDGE
Fabricated by Ludlow Brothers of Birmingham, England. Nice display in a 8.25” x 12.25” Riker case. Photocopy of an original wrapper at top with info sheet below, and then the cartridge at the… (M24051). Learn More »
PACKAGE OF 4MM FLOBERT PRIMED CASES
Here is a round pasteboard box of primed cases for a 4mm Flobert pistol. Printed label on lid, printed red “tape” around side. Empty cases have “KC” headstamp. Good condition, but unknown… (172-4106). Learn More »
Showing 101 to 120 out of 125
Most Popular
Historical Firearms Stolen From The National Civil War Museum In Harrisburg, Pa »
Theft From Gravesite Of Gen. John Reynolds »
Cavalry Carbine Sling Swivel »
Fine Condition Brass Infantry Bugle Insignia »
featured item
CLASSIC CONFEDERATE ENLISTED CAVALRY SABER AND WOOD SCABBARD BY HAMMOND MARSHALL OR KRAFT, GOLDSCHMIDT AND KRAFT
This is a very good, complete, classically Confederate cavalry saber with wood scabbard. Other known examples include one in the Wray Collection at the Atlanta History Center. Some collectors still refer to it as a product of Hammond Marshall and… (172-5794). Learn More »
site search
