Showing 101 to 120 out of 140
Face is in nice condition and free of cracks and chips. Detail to the eagle is good however some of it is subdued due to the contrasting light and dark surface patina. Reverse has 100% of the lead and… (565-1902). Learn More »
Plate is in solid condition. There are no visible cracks or chips. The edge is complete with no missing brass. Eagle is slightly subdued by the brown dirt patina which has filled in some of the lower… (2022-1428). Learn More »
Plate is in solid condition. There are no visible cracks or chips. The edge is complete with no missing brass. Eagle is slightly subdued by the brown dirt patina which has filled in some of the lower… (2022-1426). Learn More »
White buff leather is in excellent condition. The belt is constructed in three sections which are connected by two square brass rings. Hanging from the rings is a white buff frog for a Model 1832… (766-1604). Learn More »
$1,250.00
Originally $1,500.00
These plates, measuring 56 X 87mm, followed the standard U.S. 1839 version, but with VMM stamped in the rolled brass indicating Volunteer Militia of Maine. These were paired on equipment with the… (1184-148). Learn More »
These plates were introduced in 1826 for use on the bayonet shoulder belt. When the bayonet was switched to wear on the waistbelt in the early 1840s these plates with hooks were relegated to use on… (1184-136). Learn More »
This Federal shoulder belt plate is of the regulation 1826 pattern. Constructed in the die-struck and rolled brass method, the brass accoutrement’s face shows a clear eagle in the center. Face has a… (2022-1849). Learn More »
O’Donnell and Campbell date the purchase of these plates by the state of Maine between 1855 and 1861 for the Volunteer Militia of Maine, organized in 1851, and which furnished ten regiments of… (1184-144). Learn More »
Panel plates, so called from the use of the central rectangular panel with scalloped corners setting off a central emblem against a frame border, came in around 1835 and became very popular in the… (1184-147). Learn More »
This is made of die-struck rolled brass in the usual fashion of the M1839 plate and has a single arrow back stud and belt hook soldered in place on the reverse, a pattern of fastener well known from… (2022-2281). Learn More »
This is a pretty militia plate using an American eagle with arrows and olive branch as the central motif on the scalloped corner panel at center along with a US shield on its chest that has a single… (1184-146). Learn More »
Although evolving from the US Model 1832 general staff rectangular waist belt plates with a US in a wreath, the immediate impetus to New York’s adoption of this plate for officers and enlisted men… (1184-141). Learn More »
The face is slightly discolored from ground action leaving a mix of dark and light patina. The face is free of cracks and bends. Eagle stamping is good but slightly subdued due to oxidation. Reverse… (2022-1423). Learn More »
This is a nice excavated SNY belt plate. Pattern 1839 belt buckle with puppy-paw hooks. Beautiful brown face with the letters “SNY” in the center. Light wear over face with smooth chocolate brown… (2022-1554). Learn More »
This sword belt plate is very similar to some wartime and prewar Virginia plates, but we feel it probably postdates the war, though excavated in Orange, Virginia. The central disk with narrow edge… (1184-117). Learn More »
This is the regulation sword belt for U.S. officers in the Civil War. The rectangular eagle belt plate with the arms of the U.S. is an early style, likely prewar or very early war, made of stamped… (1052-222). Learn More »
Belt is made of one piece of leather approx. 31.00 inches long x 1.75 wide. The interior of the belt has a sewn seam running down the center while the exterior face of the belt has a tooled line… (490-3646). Learn More »
Plate has a dark, almost black face with a strong “SNY” stamping. Face is free of dings and dents. Reverse has 99% of the lead fill but no hooks. This plate is from the collection of local… (1163-220). Learn More »
$975.00
ON HOLD
This relic belt plate consists of the center part of the plate only. The entire border as well as both posts and tongue on the reverse are gone. The face has a dark and scaly appearance with most of… (1181-20). Learn More »
Belt is made of black bridle leather which is very pliable. Belt meas. approx. 1.75 inches wide with a tooled line along each edge. Plate is a two-piece tongue and wreath with a spread-winged eagle… (2022-1096). Learn More »
$750.00
ON HOLD
Showing 101 to 120 out of 140
Historical Firearms Stolen From The National Civil War Museum In Harrisburg, Pa »
Theft From Gravesite Of Gen. John Reynolds »
Cavalry Carbine Sling Swivel »
Fine Condition Brass Infantry Bugle Insignia »
This uncased eighth-plate tintype is a very clear studio view of a Confederate lieutenant colonel wear frock coat, narrow brim hat, gauntlets and tall boots. He has tilted his hat slightly to one side and wears a sort of tight-lipped smile. His… (1138-2029). Learn More »