This is the long pattern fuse adapter for use in rifled artillery shells. The longer fuse allowed for longer burn times to cover the distances the rifled cannons could shoot. These replaced older wood fuse adapters in the Spring of 1863 and continued to be used to the end of the war. This example has almost no taper to the lower portion and a thicker flange with a slight bevel to the top edge.

These adapters were cast and then turned on a lathe. This one is threaded with the typical 12 threads per inch. A central hole was drilled out to accept the paper time fuse. All featured a flanged head with two spanner holes. This specimen measures 1.84” long x 1.2” across the flange.

This fuse adapter is in very good condition and has an even green patina.    [jet]

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

THIS ITEM, AS WITH ALL OTHER ITEMS AVAILABLE ON OUR WEB SITE,

MAY BE PURCHASED THROUGH OUR LAYAWAY PROGRAM.

FOR OUR POLICIES AND TERMS,

CLICK ON ‘CONTACT US’ AT THE TOP OF ANY PAGE ON THE SITE,

THEN ON ‘LAYAWAY POLICY’.