Edged Weapons

Showing 221 to 240 out of 265


MODEL 1835/1840 .69 SOCKET BAYONET

MODEL 1835/1840 .69 SOCKET BAYONET

Bayonet is in good used condition. The metal surface of the socket is dark while the blade is semi-bright. Blade flat has strong “US” stamping with an “X” stamped below it. Locking ring is a… (172-3804). Learn More »

AMES MODEL 1860 LIGHT CAVALRY SABER, DATED 1860

AMES MODEL 1860 LIGHT CAVALRY SABER, DATED 1860

This blade is a Civil War saber that was referred to as the “light cavalry” saber by the US Ordnance Department. An early war Ames contract Model 1860 cavalry saber, it was issued to the Federal… (172-3371). Learn More »

$1,595.00
ON HOLD

GAR DEPARTMENT COMMANDER’S SWORD ID’D TO FORMER DRUMMER BOY IN 10TH MASSACHUSETTS INFANTRY

GAR DEPARTMENT COMMANDER’S SWORD ID’D TO FORMER DRUMMER BOY IN 10TH MASSACHUSETTS INFANTRY

This high quality GAR sword is in the pattern of the Model 1860 Field and Staff Officer’s sword. It is identified to former Musician Myron P. Walker of the 10th Massachusetts Infantry. He carried… (172-3585). Learn More »

IMPORT NON-REGULATION FOOT OFFICER’S SWORD ID’D TO TWICE WOUNDED 6TH WISCONSIN & 12TH NEW HAMPSHIRE OFFICER WHO ALSO SAW SERVICE IN THE MEXICAN WAR AS AN ENLISTED MAN

IMPORT NON-REGULATION FOOT OFFICER’S SWORD ID’D TO TWICE WOUNDED 6TH WISCONSIN & 12TH NEW HAMPSHIRE OFFICER WHO ALSO SAW SERVICE IN THE MEXICAN WAR AS AN ENLISTED MAN

This sword is identified to Colonel John F. Marsh who served as a Lieutenant and Captain in the 6th Wisconsin of the famous “Iron Brigade” and then became Lieutenant Colonel of the 12th New… (172-3587). Learn More »

NORWEGIAN TRIANGULAR SOCKET BAYONET

NORWEGIAN TRIANGULAR SOCKET BAYONET

This socket bayonet is iron with a triangular blade that meas. approx. 17.00 inches long. The flat surface of the blade has a fuller that runs approx. 13.25 inches long beginning about 3.00 inches… (689-02). Learn More »

LARGE ENGLISH BOWIE KNIFE WITH SHEATH 1870’S – 1880’S

LARGE ENGLISH BOWIE KNIFE WITH SHEATH 1870’S – 1880’S

The blade of this knife is in excellent condition. Its surface is bright and clean and the edge is near perfect. There are only two rough spots along the length of the edge, these can be felt but are… (824-01). Learn More »

ORIGINAL, COLLINS & CO. M1840 / 60 TRANSITION LIGHT CAVALRY SABER WITH SCABBARD IN VERY GOOD CONDITION

ORIGINAL, COLLINS & CO. M1840 / 60 TRANSITION LIGHT CAVALRY SABER WITH SCABBARD IN VERY GOOD CONDITION

This Civil War artifact is a seldom-seen Collins & Company enlisted Model 1860 light cavalry saber produced by the Collinsville, Connecticut firm in 1862. Often referred to as the 1840 / 1860… (344-60). Learn More »

MODEL 1842 AUSTRIAN BAYONET WITH ORIGINAL SCABBARD

MODEL 1842 AUSTRIAN BAYONET WITH ORIGINAL SCABBARD

Nice 4-edged bayonet with mottled dark/light patina. Scabbard is composed of wooden core covered with leather with single side seam. Some age breaks in leather near top. Large iron belt hook attached… (689-27). Learn More »

$225.00
Originally $295.00

CONFEDERATE ARTILLERY SHORT SWORD

CONFEDERATE ARTILLERY SHORT SWORD

Overall length 25”, with 19.5” spear shaped blade, measuring 1.5” at base. This blade has all the tell-tale characteristics of Confederate versions of the U.S. artillery sword, beginning with… (172-3546). Learn More »

ONLY KNOWN EXAMPLE OF AN IMPORTED M1840/1860 TRANSISTIONAL ‘KIRSCHBAUM’ CAVALRY SABER AND SCABBARD

ONLY KNOWN EXAMPLE OF AN IMPORTED M1840/1860 TRANSISTIONAL ‘KIRSCHBAUM’ CAVALRY SABER AND SCABBARD

This imported saber is the only known ‘transitional’ Model 1840 / 1860 cavalry saber produced by the German firm of “C. R. Kirshbaum & Company” that we have seen.  Specimen exhibits the… (344-59). Learn More »

$1,500.00
Originally $1,950.00

US MODEL 1852 CIVIL WAR NAVAL OFFICER’S SWORD & SCABBARD

US MODEL 1852 CIVIL WAR NAVAL OFFICER’S SWORD & SCABBARD

Maker-mark [obverse ricasso]: “Tomes Son / & Melvain / New York”. Blade maker-mark [reverse ricasso]: “Clauberg / Solingen”. Markings crisp. Semi-bright blade measures 29” in length and… (344-1714). Learn More »

$1,850.00
Originally $2,450.00

BAYONET FOR THE US MODEL 1917 RIFLE

BAYONET FOR THE US MODEL 1917 RIFLE

This bayonet and scabbard is in overall good condition. The blade is semi-bright with minor amounts of mottling. The blade meas. approx. 17.00 inches long with a single fuller that starts just above… (E2535). Learn More »

AMES MODEL 1832 ARTILLERY SHORT SWORD WITH SCABBARD & BELT RIG

AMES MODEL 1832 ARTILLERY SHORT SWORD WITH SCABBARD & BELT RIG

Hilt is made of cast brass with spread winged eagle stamped into both sides of the pommel. Grip has three rivet heads and scalloped feather design. Plain, straight counterguard with a quillon on each… (172-3470). Learn More »

IMPORTED M1860 STAFF & FIELD OFFICER’S SWORD BY HORSTMANN

IMPORTED M1860 STAFF & FIELD OFFICER’S SWORD BY HORSTMANN

This Model 1860 Staff sword is a post-war piece in fine condition overall. Though not maker-marked, this Prussian-made sword blade, by Gebruder Weyersberg, was one of thousands imported by Horstmann… (172-3225). Learn More »

ORIGINAL, DATED 1860 AMES MODEL 1860 LIGHT CAVALRY SABER AND SCABBARD IN GOOD CONDITION

ORIGINAL, DATED 1860 AMES MODEL 1860 LIGHT CAVALRY SABER AND SCABBARD IN GOOD CONDITION

Here is a pre-Civil War Ames saber specimen and forerunner of the type issued to Federal horsemen during the War. Produced by the Chicopee, Massachusetts firm of Ames Sword Company, this weapon is the… (172-3367). Learn More »

RUGGED, NINETEENTH CENTURY U. S. NAVY ORDINARY SEAMAN’S KNIFE

RUGGED, NINETEENTH CENTURY U. S. NAVY ORDINARY SEAMAN’S KNIFE

This rugged artifact is a standard-issue, British-imported naval seaman’s folding pocket knife in use by the U. S. Navy during the late 19th century and early 20th century. In very good, complete… (558-189). Learn More »

US M1840 CAVALRY SABER IMPORTED BY HORSTMANN

US M1840 CAVALRY SABER IMPORTED BY HORSTMANN

This example of an original, M1840 heavy cavalry saber and scabbard was imported by the Philadelphia firm of William Horstmann. Blade shows the maker’s address on the obverse ricasso of… (172-3293). Learn More »

US MODEL 1840 ENLISTEDMAN'S CAVALRY SABER BY HAMMOND

US MODEL 1840 ENLISTEDMAN'S CAVALRY SABER BY HAMMOND

While no Federal saber contracts for the C. Charles Hammond and Son Company have been found, they did have contract in 1864 to supply the U.S. Ordnance Department with axes, hatchets, hammers and… (E2111). Learn More »

$825.00
Originally $1,050.00

A BRUTAL-LOOKING, MODIFIED CONFEDERATE FOOT ARTILLERY SWORD

A BRUTAL-LOOKING, MODIFIED CONFEDERATE FOOT ARTILLERY SWORD

This hefty edged weapon is a Confederate foot artillery short sword that is similar to the Federal Model 1832 U.S. Foot Artilleryman's sword often described as a 'Roman gladiator' sword. The weapon… (486-22). Learn More »

$2,500.00
Originally $2,950.00

CONFEDERATE FOOT ARTILLERY SWORD

CONFEDERATE FOOT ARTILLERY SWORD

Bronze hilted with diamond-shaped, double-edged, spear-point blade. Overall length: 22.25". Blade measures 16.25" in length, 1.75" in width, and has a half inch fuller running from 2" above the… (486-26). Learn More »

$2,000.00
Originally $2,200.00


Showing 221 to 240 out of 265

featured item

EARLY & SCARCE CIVIL WAR TIN SNARE DRUM WITH WASHINGTON PORTRAIT MADE BY JOHN LOWELL OF BANGOR, MAINE

Full size snare drum that meas. approx. 15.25 inches tall by 16.25 inches across. With the exception of the tension ropes, the drum is all original. The tin body is in excellent condition with only a few scattered shallow dings. The body surface has… (413-62). Learn More »

Upcoming Events

23
Jun

Coming up June 30 - July 1: Summer Gettysburg Show at the Allstar Complex at the Eisenhower Inn Learn More »