Equipment

Showing 1 to 20 out of 36


WORLD WAR TWO GERMAN PARATROOPER FIGHTING KNIFE & SCABBARD

WORLD WAR TWO GERMAN PARATROOPER FIGHTING KNIFE & SCABBARD

The overall length of the drawn knife is 11.00 inches long. The blade itself is 6 11/16 inches long. It has a top edge running for half of the blades length and a normal length true edge. Blade… (980-295). Learn More »

WORLD WAR TWO JAPANESE TROPICAL SUN HELMET

WORLD WAR TWO JAPANESE TROPICAL SUN HELMET

Helmet consists of woven bamboo covered with light olive drab water-resistant, cotton drill cloth. The covering is comprised of six machine sewn pieces, meeting at the apex of the crown and sewn under… (980-231). Learn More »

WORLD WAR TWO JAPANESE MODEL 1938 ENLISTED MAN’S TROPICAL SUN HELMET

WORLD WAR TWO JAPANESE MODEL 1938 ENLISTED MAN’S TROPICAL SUN HELMET

Woven bamboo covered with light olive drab water-resistant, cotton drill cloth. The covering is comprised of six machine sewn pieces, meeting at the apex of the crown and sewn under a reinforcing band… (980-232). Learn More »

U.S. MODEL 1917 BOLO KNIFE WITH SHEATH

U.S. MODEL 1917 BOLO KNIFE WITH SHEATH

Maker-mark (stamped on sheath); “Bradly Brothers/ 1918”. Ricasso markings: (obverse) “U.S./ Mod 1917”, (reverse) “Plumb/ Phila./179”. Overall length 15”. Single edge, flaring blade,… (482-431). Learn More »

WORLD WAR TWO GERMAN RED CROSS HEWER

WORLD WAR TWO GERMAN RED CROSS HEWER

Blade meas. approx. 10 ½” long x approx. 1 ½” wide with a squared, blunt tip and is bright throughout. Blade has a deep fuller at center that runs approx. 8” long. The top edge of the blade is… (E2761). Learn More »

WORLD WAR TWO GERMAN ARMY DAGGER WITH HANGER

WORLD WAR TWO GERMAN ARMY DAGGER WITH HANGER

The blade has a surface that is semi-bright with light scattered mottling. There are no nicks and the point is good. The reverse of the blade is marked “ALCOSO / SOLINGEN” with a company logo of… (E2762). Learn More »

WW2 FAIRBAIRN-SYKES STYLE FIGHTING KNIFE WITH SHEATH

WW2 FAIRBAIRN-SYKES STYLE FIGHTING KNIFE WITH SHEATH

Blade is double edged with a raised central ridge. It meas. approx.6.75 inches long and has hints of blue along with some surface dirt and heavy oxidation. Edges are free of nicks. Point has been… (E2766). Learn More »

MINT BERETTA M1935 PISTOL WITH GERMAN “4UT” STAMP

MINT BERETTA M1935 PISTOL WITH GERMAN “4UT” STAMP

Exceptional Like-New example of the Beretta Model 1935 pistol used by the Germans in World War II.  Principal markings include: “570719” (serial number); “P BERETTA – CAL. 765 –… (G3816). Learn More »

NEAR MINT GERMAN SA DAGGER WITH DUAL MAKER MARKS

NEAR MINT GERMAN SA DAGGER WITH DUAL MAKER MARKS

An exceptional example of a Model 1933 Sturmabteilung (SA) dagger by Carl Eickhorn of Solingen!  Carl Eickhorn was one of the premier manufacturers of German dress daggers during the NSDAP period,… (E2760). Learn More »

$975.00
ON HOLD

VERY FINE CONDITION WORLD WAR ONE/TWO GERMAN NAVAL SWORD IDENTIFIED TO KONTER ADMIRAL HANS HAMELAU

VERY FINE CONDITION WORLD WAR ONE/TWO GERMAN NAVAL SWORD IDENTIFIED TO KONTER ADMIRAL HANS HAMELAU

This impressive Imperial Naval sword was carried throughout the long career of its owner from the early 1900’s through World War One and the end of World War Two. The sword is a beautiful example… (954-55). Learn More »

$4,700.00
Originally $5,900.00

MODEL 1903 SPRINGFIELD BAYONET WITH 3rd PATTERN SCABBARD

MODEL 1903 SPRINGFIELD BAYONET WITH 3rd PATTERN SCABBARD

Blued blade meas. approx. 16.00 inches long with an unstopped central fuller that runs approx. 12 3/4 inches. The blade surface has a small area of surface pitting about a third of the way down the… (E2719). Learn More »

WWII JAPANESE ARISOKA RIFLE BAYONET, TYPE 30

WWII JAPANESE ARISOKA RIFLE BAYONET, TYPE 30

Overall length, 20.5”; blade length 15.625”, w/characteristic hook quillon. Obverse ricasso stamped with “three leaf clover”.  Semi-bright blade exhibits slight oxidation staining AND traces… (362-806). Learn More »

SS DAGGER

SS DAGGER

RZM SS Dagger marked RZM M7/37 and 1051/38 SS on reverse blade ricasso. Plated fittings show little surface wear/age with no lifting to edge of grip and crossguard. Black ebony grip shows small minor… (M25917). Learn More »

NEAR MINT GERMAN WII ARMY OFFICER’S DAGGER BY CARL EICKHORN

NEAR MINT GERMAN WII ARMY OFFICER’S DAGGER BY CARL EICKHORN

This Carl Eickhorn (second pattern) Army officer’s dagger is in near mint, uncleaned condition. It does not appear to have been touched since the war. This type of dagger is shown on pages 24-28 of… (E2754). Learn More »

$1,250.00
ON HOLD

WW2 US .30 CAL. M1 STANDARD CARBINE

WW2 US .30 CAL. M1 STANDARD CARBINE

Standard was awarded a contract for 370,000 carbines on August 6, 1942. Approximately 247,160 total carbines were made by Standard Products, about 4% of M1 carbines made. The first block of serial… (G3737). Learn More »

$2,250.00
ON HOLD

M5 A-1 BAYONET AND SCABBARD

M5 A-1 BAYONET AND SCABBARD

Made in the 1960’s these were the last bayonets meant for use with the M-1. The drawn bayonet meas. approx. 11.50 inches long. The parkerized 6.75 inch blade is in excellent condition. The last 3.50… (E2740). Learn More »

MODEL 1916 WORLD WAR ONE GERMAN HELMET WITH LINER

MODEL 1916 WORLD WAR ONE GERMAN HELMET WITH LINER

The exterior of this helmet is painted a dark green and has several small indentations on the crown. Approx. 65% of the paint remains on the exterior the rest having a nice dark patina. Both of the… (980-31). Learn More »

MARK 2 NAVY FIGHTING KNIFE BY CAMILLUS WITH SCABBARD

MARK 2 NAVY FIGHTING KNIFE BY CAMILLUS WITH SCABBARD

Overall the drawn knife meas. approx. 12.00 inches long. The blade meas. approx. 7.00 inches long with a 2.75 inch long rectangular central fuller and a clipped style point. Blade retains about 98% of… (E2741). Learn More »

MODEL 1917 U.S. MAGAZINE RIFLE BY EDDYSTONE

MODEL 1917 U.S. MAGAZINE RIFLE BY EDDYSTONE

When the United States entered WW1 they had a shortage of rifles. US production facilities were already set up to manufacture the British pattern 1914 rifle so they were retooled to make rifles that… (482-426). Learn More »

$850.00
ON HOLD

MODEL 1917 BOLO KNIFE WITH SCABBARD

MODEL 1917 BOLO KNIFE WITH SCABBARD

The bolo meas. approx. 15.00 inches overall with a pointed blade approx. 10.25 inches long. The blade surface is lightly mottled and the true edge has been sharpened. Ricasso is marked on one side… (482-432). Learn More »


Showing 1 to 20 out of 36

featured item

RHODE ISLAND STATE CONTRACT UNION ENLISTED FOOT GREAT COAT

The Infantry, Heavy Artillery and Engineers used this style of greatcoat. The foot style great coat is single breasted with a standing collar and has an elbow length cape. The coat is made of quality Sky Blue wool with a heavy brown cotton jean… (583-01). Learn More »

Upcoming Events

19
Jan

Coming up: 65th Annual Baltimore Antique Arms Show, March 16-17 at the Cow Palace, Timonium, MD. Learn More »