Showing 1 to 210 out of 210
Here is a very handsome and inscribed, original Model 1850 Officer's Staff and Field imported sword complete with its original metal scabbard. On the scabbard mount of this Civil War edged weapon is a… (490-06). Learn More »
This original condition Model 1860 Staff officer’s sword is one of many produced by various manufacturers from the Civil War to the turn of the century. Manufactured by the Philadelphia firm of… (344-105). Learn More »
This imported sword is the classic Civil War style specimen that the Surgeon General and U.S. Medical Department designated as the Medical Staff Sword. Adopted in 1840 and officially known as the… (344-111). Learn More »
No maker mark. Bright gray blade measures 30.25” in length, 1” in width at the ricasso. Remains ding-free with slight traces of condensation spotting near tip. Regulation “U.S.” etching… (344-44). Learn More »
This saber was manufactured by the most highly respected Solingen, Prussia, and imported to the U.S. for use in the Civil War. The curved 35-½ inch blade is a gray dusky peppery patina with only two… (539-03). Learn More »
$1,800.00
Originally $2,200.00
Presented here is a standard Civil War Model 1850 foot officer’s sword complete with its matching leather scabbard by the Christopher Roby Manufacturing Company of West Chelmsford, Massachusetts. C.… (344-1715). Learn More »
[See Peterson, p.5, fig. 52]. Maker-mark [obverse ricasso]: “N.P. Ames / Cabotville / Mass”; US marking [reverse]: “USN / 1842”. Markings slightly worn, though entirely legible. This cutlass… (172-2877). Learn More »
This saber is an early, seldom seen ‘C. Roby’ enlisted Model 1840 light artillery edged weapon termed a Type-1. Blade exhibits the single, rare one-line maker address “C. ROBY & CO” but no… (172-2880). Learn More »
This World War One era specimen is an identified, USMC officer’s sword and scabbard used by Edgar Hayes. Marine Corps history indicates that this type of sword was first presented to a Marine… (172-2881). Learn More »
This hefty edged weapon is a Confederate foot artillery short sword that is similar to the Federal Model 1832 U.S. Foot Artilleryman's sword often described as a 'Roman gladiator' sword. The weapon… (486-22). Learn More »
$2,500.00
Originally $2,950.00
This Model 1860 Staff sword is a post-war piece in fine condition overall. Though not maker-marked, this Prussian-made sword blade, by Gebruder Weyersberg, was one of thousands imported by Horstmann… (172-3225). Learn More »
Hilt is made of cast brass with spread winged eagle stamped into both sides of the pommel. Grip has three rivet heads and scalloped feather design. Plain, straight counterguard with a quillon on each… (172-3470). Learn More »
Tapered double edged blade with a surface that has very light scattered pitting and mottling. The blade is approx. 29.50 inches long and meas.1.00 inch wide at the ricasso. The first 5.00 inches of… (172-3828). Learn More »
Here is a very fine quality, imported 'Knights Head' style sword made for the American militia market. Official regulations in the 1830s through 1840s called for infantry officer swords to have a… (172-3830). Learn More »
Here is an original Civil War Model 1850 foot officer’s sword in fine condition complete with its leather scabbard. Sword is unmarked and is no doubt an import item. The handsome imported infantry… (172-3120). Learn More »
This style Eagle hilt was described by the Navy in 1830 and became the pattern for the regulation Model 1841. Manufactured: England / Norfolk, VA Maker: Joseph Rogers & Sons Year: C1830s … (870-51). Learn More »
Family ID to Lt. Edmund Byrne with service from 1814 to 1850. His name is scratched under the guard. Byrne was a midshipman in 1814, promoted to Lt. in Jan. 1825, and to Commander on 9/8/41. He… (870-59). Learn More »
Manufactured: New York; Maker: Tiffany & Co / PDL; Year: Civil War; Model: M 1860 Naval Officer Cutlass ; Size: 30.25; Condition: VG High grade naval officer’s cutlass from Tiffany &… (870-08). Learn More »
A rare pre-war pattern of the 1852 naval officer's sword. Presented to: “Lt. Jas. H. Moore / U.S.N. /from his friend / Richd. W. Tyson / Feb. 12, 1857.” Manufactured: Philadelphia, PA; Maker:… (870-13). Learn More »
C.1850 Militia Officer’s Sword by Ames Mfg. Co. Chicopee, Mass. Double-edged straight blade is etch decorated with scroll & leaf designs and a wing spread American Eagle. Obrese side the same… (516-84). Learn More »
This imported Civil War sword is an example of an original Model 1821 foot officer’s sword manufactured in France. The plain, unembellished, brass-hilted sword is complete with two broken portions… (172-4189). Learn More »
Maker: Unmarked; probably N.P. Ames of Springfield, Mass. Blade Length: 34” Blade Etchings: Only a small amount of the light leaf design remains. Blade is very nice with smooth semi-bright… (344-2514). Learn More »
Manufactured: Unmarked Maker: Unmarked Year: 1838 - 1850s Model: Eagle pommel Size: 29.5 inch blade, 1 inch wide, .314 thick Condition: VG The blade is etched: “Percival / Drayton / U.S. /… (870-48). Learn More »
Model 1852 Naval Officer dated 1861 by Brown, Boston Mass. White washed sharkskin grip. Manufactured: Boston, Mass. Maker: S.E. Brown Year: 1861 Model: M1852 Navy Officer Size: 28.9 inch… (870-27). Learn More »
Maker: N.P. Ames Springfield, Mass. Blade Length: 34” Blade Etchings: Faint “United States Dragoons”. Faint N.P. Ames Springfield. Ricasso stampd with inspector’s initials “JM”, date… (344-2558). Learn More »
Maker: Unknown Blade Length: 30” Blade Etchings: Exceptional condition etching. Frosted panel with scroll/oak leaf designs. Panoply of arms with Liberty Cap on pole. Wing spread eagle etc. Grip:… (344-2527). Learn More »
Manufactured: Cabotville, Mass Maker: N.P. Ames Year: 1842 Model: Model 1841 Size: 21.2 inch blade Solid brass hilt with fish scale grip held by 3 steel rivets. An American eagle is cast into… (870-25). Learn More »
Manufactured: Philadelphia Maker: Horstmann & Sons Year: c1830 - 59 Model: M1826 Size: 32 inch Condition: Excellent+ The 1826 styles of the Marine Mamaluke have brought about straighter blades,… (870-81). Learn More »
Manufactured: U.S. Maker: Unmarked Year: C1820-25 Model: Mamaluke Size: 29.25 inch blade 1.30 in. wide Condition: Excellent+ Sharply curved, single edged, blue and gold engraved blade… (870-72). Learn More »
Manufactured: W. Chelmsford, Mass. Maker: C. Roby & Co. Year: Civil War Model: M1852 Navy Officer Size: 28.75 inch blade Roby Naval officer swords are certainly not common. This blade… (870-07). Learn More »
Manufactured: England Maker: Unmarked Year: C1820-25 Model: Mamaluke Size: 35.8 inch blade, 1.21 wide Condition: Excellent+ Tri-color blade - blue, gold and "white" of flat design. Ship's… (870-76). Learn More »
Manufactured: Unknown Maker: Unknown Year: 1820-1830 Model: Naval Surgeon Sword Size: 25.75 Condition: VG Great early naval surgeon sword. Guard has high grade casting on knucklebow, pommel… (870-11). Learn More »
Manufactured: unmarked Maker: unmarked Year: C1820-25 Model: Mamaluke Size: 29.25 inch blade 1.33 in. wide Condition: Excellent+ Early Marine Officer Mamaluke with carved Ivory grip and… (870-75). Learn More »
Manufactured: Springfield Mass Maker: N. P. Ames Cutler Year: 1841-1050 Model: M 1841 Naval Officer Sword Size: 28.25 Condition: VG Eagle head brass guard is in great shape with both… (870-62). Learn More »
$5,000.00
ON HOLD
Maker: Ames Manufacturing Co. Springfield, Mass. Blade Length: 34” Blade Etchings: “UNITED STATES DRAGOONS” done with dry needle etch. “DRAGOONS” is visible, “UNITED STATES” is worn off.… (344-2560). Learn More »
Presented here is a fine, original, Civil War Model 1850 foot officer’s sword complete with leather scabbard manufactured by the highly regarded Hartford, Connecticut firm of Collins and Company and… (172-4275). Learn More »
Original Civil War import Model 1850 foot officer’s sword sold by Schuyler, Hartley and Graham of New York. Sword is in good condition and is identified to Commissary Sergeant John Dodge of the… (344-2723). Learn More »
Manufactured: Philadelphia Maker: Horstmann Year: not dated Model: 1840 NCO Size: 31.5 inches Early wide blade NCO sword by Horstmann of Philadelphia. Horstmann NCO swords are distinct as… (870-88). Learn More »
US Revenue Cutter Service Sword, Model 1834, also referred to as US Revenue Marine. Manufactured 1834-62. A scarce sword made for officers of the United States Revenue Cutter Service or Revenue… (870-37). Learn More »
Here is an original example of an Ames 1862-dated government naval boarding. Blade measures 26” long, 1¼” wide at the ricasso and has a flat back with a single, wide, unstopped fuller. Blade is… (870-20). Learn More »
Manufactured: England Maker: William Harvey Year: 1840 - 1850 Model: Mameluke Size: 30.25 Condition: VG Wonderful Mamaluke Saber manufactured in England. Most likely for a British officer… (870-74). Learn More »
Sword meas. approx. 29.75 inches long from pommel to point. The blade meas. approx. 24.00 inches long with a bright surface. There is a central stopped fuller that meas. approx. 22.00 inches long.… (870-85). Learn More »
A remarkable sword manufactured by W.H. Horstmann & Co., New York after the Model 1834 US Revenue Cutter/Marine sword. Neatly engraved on the reverse folding guard, “Geo. Wm. Gordon / United… (870-60). Learn More »
In 1859 the US Marine Corps regulations changed. The prized Mamaluke style sword was replaced with the same regulation sword used by the Army. This would later be reversed and today the Marines still… (870-52). Learn More »
The blade of this interesting sword measures 26”. It has a main fuller running nearly the entire length with a secondary fuller approx. 18” of the length. The last 8 ½” of the blade has a false… (344-3245). Learn More »
Manufactured by the Newark, New Jersey firm of Henry Sauerbier. Sword meets all the normal requirements for this sword with a few exceptions. It has a metal scabbard instead of the normally seen… (870-32). Learn More »
An unusual pattern variant made in 1864. The maker or more likely the supplier’s name is on the top scabbard mount and reads: “V. Labruna/in/Napoli”. The grip is 3 7/8” long and topped with… (870-17). Learn More »
Simon Backus Bissell was born in Fairlee, Vt., on October 28, 1808. He was appointed Midshipman on November 6, 1824, Passed Midshipman on June 4 1831, and Lieutenant December 9, 1837. At the beginning… (870-63). Learn More »
These sabers were made by the Springfield Armory from about 1880 into the 1890’s. Overall the sword meas. 36.50 inches from point to pommel. Blade is approx. 32.25 inches long with an unstopped… (172-4451). Learn More »
These original engravings by well-known military artist C.J. Pugliese features obverse and reverse views of the hilt of a Confederate sword with the “CS” showing. Image is clear and shows great… (933-13). Learn More »
This original Model 1850 Staff and Field Officer’s sword is complete with the original metal scabbard. This quality steel edged weapon was presented to Charles Hannabery of Philadelphia by members… (482-380). Learn More »
This original engraving by well-known military artist C.J. Pugliese features a close view of a Confederate sword with the “CS” showing, and the top of a scabbard. Image is clear and shows great… (933-12). Learn More »
Identified Civil War Ames Model 1840 artillery saber in very good condition. Made for artillery mounted units, this edged weapon is stamped on the obverse ricasso of the blade with a clear stamping… (870-619). Learn More »
Manufactured: Klingenthal France Maker: Klingenthal Armory Year: CW era Model: M 1860 Cavalry Officer Saber Size: 36.25” Condition: VG French import by Klingenthal. These are actually less… (870-269). Learn More »
Manufactured: Philadelphia Maker: W.H. Horstmann & Sons Year: CW Model: M1850 Foot Officer Size: 31.00” Condition: VG High grade sword from Horstmann. Standard brass foot officer guard with… (870-142). Learn More »
This original engraving by well-known military artist C.J. Pugliese features a close view of the hilt of a Confederate sword with the “CS” showing at the front. Image is clear and shows great… (933-15). Learn More »
Manufactured: Philadelphia, PA Maker: Horstmann, W. H. & Sons Year: Civil War Model: M1850 Staff for Mounted Officer Size: 32 inch blade with heavy curve Condition: VG Fine Horstmann & Sons… (870-390). Learn More »
Here is a very fine presentation quality, imported 'Knights Head' style sword specimen made for the American militia market. Official regulations in the 1830s through 1840s called for infantry officer… (169-137). Learn More »
$3,950.00
Originally $4,950.00
Very rare Ames with gold washed, quillback, Damascus blade from Solingen. Manufactured: Springfield, MA / Solingen Maker: N.P.Ames Year: C1840s Model: M1840 Size: 33 5/8 inch blade length, 1.18… (870-238). Learn More »
Manufactured: Unknown Maker: Unknown Year: 1840's Model: M 1840 Artiller Saber Size: 32.00 Condition: VG This saber is non-regulation in that it has an enlisted M1840 artillery hilt mounted with an… (870-236). Learn More »
Manufactured: Richmond, VA Maker: Boyle & Gamble Year: Civil War Model: N.C.O. Size: 26.5in blade, .8 wide, widens to .9 near the tip Condition: VG These NCO swords are quite scarce. There were… (870-499). Learn More »
Manufactured: France Maker: Klingenthal Year: CW era Model: M 1860 Staff Sword- Size: 32.50 Condition: VG High Grade M 1860 Staff Officer Sword. Presentation grade sword with an impressive large brass… (870-407). Learn More »
Manufactured: Chicopee, Mass. Maker: Ames Mfg. Co. Year: Civil War Model: M1860 Size: 35 inch blade Condition: Excellent+ This regulation M1860 Cavalry Officer has the decorated guard with the eagle,… (870-122). Learn More »
Manufactured: Philadelphia Maker: Horstmann / Weyersberg Year: 1840 Model: M 1840 General Officer’s Sword Size: 32.25 inch blade Condition: Mint This sword is a real screamer and is mint from top… (870-659). Learn More »
Manufactured: Richmond, VA Maker: Boyle & Gamble Year: Civil War Model: B&G NCO Size: 26.8 inch blade, .93 wide, .29 thick Condition: Excellent+ This NCO has the standard straight blade with a… (870-485). Learn More »
Manufactured: French pattern & Maker Maker: Chatellerault Year: Civil War Era Model: Cent Garde Cavalry Officer Size: 37.25 inch blade & 1.25 inches wide Condition: Excellent+ The "Cent Garde"… (870-260). Learn More »
Manufactured: Chicopee, Mass. Maker: Ames Mfg. Co. Year: c1850 - Civil War Model: Cruciform guard officer Size: 31.2 inch double edged blade Condition: Excellent+ This officer sword has an engraved… (870-203). Learn More »
$4,000.00
ON HOLD
Manufactured: New York / Solingen Maker: Horstmann Bros / K&C Year: 1850 Model: 1840 Size: 31.5 inch Condition: Excellent+ Horstmann Brothers, NY Model 1840 Cavalry Saber in the short blade format… (870-248). Learn More »
Officer’s cavalry sabre inscribed between the top mount and throat, "Presented to / Lt. J. Foster Pope / 14th Regt. Mass. Vols. / by / his late mess mates of / Co. A Mass. 13th / Apr 15th… (870-252). Learn More »
Standard Civil War Officer’s sword with cast brass hilt with scroll/leaf/flower designs in guard. Grip wrapped with sharkskin and bound with double strand twisted brass wire. Standard pommel cap… (870-123). Learn More »
Excellent conditioned Model 1850 foot officer’s sword made by the Ames Manufacturing Company of Chicopee, Massachusetts complete with its matching metal scabbard. The drawn sword meas. approx. 36.25… (870-361). Learn More »
$5,500.00
ON HOLD
The blade on this item is in excellent condition. It is bright and clean with only light mottling. The drawn sword meas. approx. 36.50 inches long from point to pommel. It has a stopped fuller that… (870-382). Learn More »
Original Civil War Model 1850 Field & Staff officer’s sword in nice condition complete with its metal scabbard. Sword is unmarked and is no doubt an import item. It is identified by a… (870-157). Learn More »
The drawn saber meas. approx. 42.25 inches long from point to pommel. The blade itself is bright with just the slightest scattered mottling. There is no pitting. True edge has several very small… (870-544). Learn More »
$3,500.00
ON HOLD
Foreign import, with Prussian term “Eisenhauer” [iron proof] embossed in cursive script above the obverse ricasso. Bright ding-free blade measuring 33.25” in length. Displays crisp floral… (939-01). Learn More »
$2,250.00
Originally $2,500.00
Sword has a nice cast brass hilt. Top has pineapple shaped pommel cap and a molded grip with acorn and oak leaf motif. Near the top of the grip on both sides is a medallion with a spread-winged eagle… (E2756). Learn More »
Manufactured: Cabotville / Chicopee Maker: Ames Year: 1848 - Civil War Model: M1840 Size: 30.2-inch blade Condition: Excellent+ The N.P. Ames Cabotville address was used up to 1847. The Chicopee… (870-341). Learn More »
This sword is in the Model 1860 Field and Staff Officer’s sword. Under the counterguard is a presentation to Captain William Fairweather of Company G, 6th Massachusetts Infantry. The blade is double… (136-25). Learn More »
This edged weapon is copied from the US Model 1832 Artillery short sword and is minus its scabbard. The blade is double edged and meas. approx. 19.00 inches with a 10.75 inch long fuller. Blade… (1000-823). Learn More »
Manufactured: France Maker: Unknown Year: 1861 Model: M 1850 Foot Officer Size: 30.25 Condition: VG Sword has components of French manufacture but a Solingen style blade. Brass guard has an even… (870-381). Learn More »
This small group of items is identified to 1st Lieutenant Anthony A. Taylor of Company a, 15th Pennsylvania Cavalry who received the Medal of Honor for actions at Chickamauga. The first item in the… (945-352). Learn More »
At top center is a large, full color, spread winged eagle sitting on a reddish brown fascine at the center of a sunburst and gold stars. Due to paint loss some of the stars are missing. The eagle’s… (945-353). Learn More »
Manufactured: Solingen Maker: Wyersberg Year: 1840-1850 Model: M 1840 General Officer Sword Size: 33.25” Condition: VF This sword is designated a general officer sword by the engraved brass… (870-352). Learn More »
Manufactured: Springfield, Mass. Maker: N.P. Ames Cutler Year: Early Springfield address Model: M1832 Size: 31.5 inch blade Condition: VG-Exc Throat and drag mounts only. Unusual top mount with single… (870-319). Learn More »
A scarce mounted staff sword with a curved blade and ray skin grip. Manufactured: Philadelphia, PA Maker: W.H. Horstmann & Sons Year: 1850 - Civil War Model: M1850 Mounted Staff Officer Size:… (870-384). Learn More »
Manufactured: Import / Washington, D.C. Maker: Import / M.W. Galt & Bro. Year: C1863 Model: M1850 Foot Officer Size: 32.1 inch blade Import style foot officer retailed by and etched on the… (870-364). Learn More »
Sword has 28” blade which is dark with light oxidation and has slight bend. Some small nicks along the edge. Obverse ricasso is marked “US / JH / 1859” while the reverse ricasso has “MADE BY /… (1030-500). Learn More »
$195.00
ON HOLD
Manufactured: Newark, NJ Maker: Sauerbier, Henry Year: Early Civil War Model: Model 1840 transitional with 1860 style grip Size: 34.2 inch blade, 1.17 wide, .353 thick This sword has all true Type 1… (870-159). Learn More »
Overall this sword meas. approx. 39.00 inches long. The blade itself is approx. 32.50 inches long with a stopped central fuller approx. 30.50 inches long. The blade surface is bright with only… (558-46). Learn More »
Manufactured: Unknown Maker: Unknown Year: 1862 Model: Non Regulation Staff & Field Size: 31.00 Condition: VG This sword is classified as non-regulation as it has the full basket minus the… (870-394). Learn More »
Manufactured: Chicopee Mass Maker: Ames Mfg Co Year: 1865 Model: M 1850 Staff & Field Size: 32.00” Condition: VG This is an early Ames 1850 Staff & Field as noted by the wide blade and block… (870-133). Learn More »
$12,000.00
ON HOLD
Sword meas. approx. 31.00 inches long from pommel to point. The blade meas. approx. 24.50 inches long with a semi-bright surface. There is a central stopped fuller that meas. approx. 22.50 inches… (1037-215). Learn More »
The drawn sword meas. approx. 35.00 inches long. The plated blade itself meas. approx. 29.75 inches long x 0.75 of an inch wide at the ricasso. It has a central fuller that starts just above the… (150-354). Learn More »
Hamilton, John D., Joseph Marino, James Kaplan. Andrew Mowbray Publishers, Inc. (January 12, 2009). Hardcover, 248 pages. 8.5x11 inches, coated paper, 600+ photographs. Finally, a book that makes… (ST287). Learn More »
$47.99 Each
Originally $79.99
Good conditioned Model 1850 foot officer’s sword believed to have been made by Sauerbier of Newark, New Jersey. Weapon is complete with the scabbard however the scabbard is in poor… (E2677). Learn More »
$1,950.00
Originally $2,250.00
Measuring 23 3/8” inches overall, with a 16 1/8” inch blade, this short sword shows the typical Johnston hilt with concentric ringed grip atop a sloping section leading to the crossguard and a… (1000-819). Learn More »
Confederate artillery short swords are collecting category of their own. This one shares enough characteristics with those of Boyle and Gamble to suggest a Richmond connection, but is possibly by… (870-484). Learn More »
This sword is an adaption for the American market of the British 1827 pattern sword for officers of riflemen. It was also “No. 29,” in the sword section of the Schuyler, Hartley and Graham… (809-75). Learn More »
$1,150.00
ON HOLD
This attractive, regulation Foot officer’s sword was manufactured by Ames in 1862. The blade of the Foot Officer sword is so slightly curved that it looks straight at first glance. It is… (1047-96). Learn More »
Manufactured: Newark, NJ Maker: Sauerbier, Henry Year: Civil War Model: Model 1850 Foot Officer Size: 31-inch blade length Condition: VG-Exc The etched blade has a large H. Sauerbier / MAKER / Newark,… (870-371). Learn More »
Manufactured: Chelmsford Mass . Maker: C. Roby & Co Year: Civil War Model: M 1850 Foot Offc. Sword Size: 31.25” Condition: VG M 1850 Foot Officer’s Sword. Nice condition foot officer sword… (870-378). Learn More »
Manufactured: Newark, NJ Maker: Sauerbier, Henry Year: Civil War Model: Model 1850 foot officer Size: 31.25 inch blade Henry Sauerbier Model 1850 foot officer sword with a sharkskin grip, Twisted wire… (870-370). Learn More »
The quintessential U.S. cavalry arm of the Civil War, the Model 1860 saber was actually introduced in 1857 as a replacement for the heavier Model 1840, but long-used collector terminology has fixed it… (E2872). Learn More »
$825.00
ON HOLD
Roby made a several versions of the 1860 cavalry officer’s saber and seems to have been willing to take on many custom orders as well. In fact, the blade etching seems to have been individually… (1047-112). Learn More »
Manufactured: France Maker: Klingenthal / E. Lyon Year: CW Period Model: M 1851 General Officer Sword Size: 31.00” Condition: VG M 1851 General Officer Sword. Scarce pattern that is a cross between… (870-355). Learn More »
Manufactured: NY / NJ Maker: Tomes, Son & Melvain / Stapleton & Co. Year: c1863 Model: M1860 staff & Field Condition: VG This is a very interesting model 1860 Staff & Field officer’s… (870-177). Learn More »
Manufactured: France Maker: Klingenthal Year: CW Size: 32 inch blade This example is in excellent condition. Scabbard retains most of the original blue finish. Mounts and drag are high grade and cast… (870-350). Learn More »
Manufactured: Chicopee, Mass. Maker: Ames Mfg. Co. Year: 1850-51 production Model: M1850 Staff Officer Size: 31.75 inch blade, 1.12 wide, 5/16 thick Highly embellished and heavily gilded guard and… (870-388). Learn More »
$12,000.00
ON HOLD
Manufactured: European Style Maker: Unmarked Year: Civil War Model: M1850 Size: 32.5 inch blade A very impressive Staff & Field officer's sword with a large half basket consisting of a lined… (870-608). Learn More »
High grade, pre-war Militia officer by Horstmann with the unusual feature of no U.S. designs on the blade and a federal shield with 7 stripes and no stars on the scabbard. Manufactured: Philadelphia,… (870-208). Learn More »
Manufactured: U.S. Maker: unmarked Year: Pre War Model: Militia Size: 29.25 inch blade, 1.25 wide, .28 thick Beautiful 5 pointed star over rays on the quillon. Spiral carved ivory grip and spiral… (870-224). Learn More »
This steel-hilted saber is modeled on the British 1796 light cavalry saber and the style was very popular in American mounted units from before the War of 1812 right into the 1840s. This has a very… (870-624). Learn More »
The 1840 sword for officers of the Medical Staff was the regulation pattern for Surgeons and Assistant Surgeons throughout the Civil War. This included not only doctors posted to general hospitals and… (1054-324). Learn More »
This presentation sword has very impressive deeply cast and chased mounts and silver gripped hilt. Schuyler, Hartley and Graham assembled and sold a wide variety of swords that were often highly… (870-653). Learn More »
If you want to own a unique, one-of-a-kind, high-end presentation sword that is literally, “the one in the book,” this might be for you. This 1840-style cavalry officer’s saber has an etched… (870-275). Learn More »
This sword represents a very popular pre-Civil War American form. The brass hilt has a smooth, rounded, “birds-head” pommel and “reverse-P” knuckleguard slotted for a sword a knot. The grip is… (870-647). Learn More »
Manufactured: Solingen Maker: Weyersberg / Horstmann Year: Sword undated, scabbard 1861 Model: 1832 Size: 19.25 inch blade The W. H. Horstmann company had a strong association with the Gebruder… (870-466). Learn More »
$2,000.00
ON HOLD
James P. Fitch got his start in the military goods business with Schuyler, Hartley and Graham. He set up his own business as a retailer in New York City in September 1862. He was joined in the… (870-639). Learn More »
W. Clauberg of Solingen was a prolific (according to Thillmann, the most prolific) maker of swords for import into the U.S. Specializing in higher quality workmanship, their blades show up with many… (870-655). Learn More »
This is an impressive sword given to an officer who was in the thick of the first day’s fighting here at Gettysburg. The 95th New York part of Cutler’s brigade, which took part in the fierce… (870-161). Learn More »
$15,000.00
ON HOLD
The Ames Sword Company catalog of 1882/83 lists this sword as number 538 and describes it as the “Old Regulation Revenue and Marine,” by which they mean the old regulation “Revenue-Marine,”… (870-38). Learn More »
This lighter version of the 1860 pattern cavalry saber was adopted for cavalry officers in 1872 and spread to mounted officers of other services starting in 1878. Initial production at Springfield was… (1047-102). Learn More »
$900.00
ON HOLD
34" curved M1860 style blade mint with etched panels on both sides. The obverse panel features exquisitely hand engraved scroll / floral motifs flanking a beautiful spread wing eagle, while the… (1089-04). Learn More »
This high-grade Ames sword displays a nice combination of history art. It shows some non-regulation elements that are not uncommon on militia swords, but generally follows the lines of the 1840… (870-345). Learn More »
This very pretty 1850 pattern sword for field and staff officers has loads of gilt finish remaining on the brass hilt and scabbard mounts, all of the blue/brown finish yet on the scabbard body, and a… (490-2141). Learn More »
This original specimen features a cast brass hilt with a simulated wire wrapped handle with no guard. Knuckle-bow on the obverse side blank, reverse side stamped “MS” for Massachusetts State which… (2020-85). Learn More »
Classic original Civil War Officer’s Sabre manufacturer unknown. Possibly an Ames or Roby made. Standard US single edge blade with a stopped fuller. Blade measures 32 ¼ by 1 1/8 inch at the… (33-222). Learn More »
This sword was a product of the Ames Manufacturing Company, a manufacturer of swords, tools and cutlery in Chicopee, Massachusetts. Ames was also involved in iron and bronze foundry. Ames was a major… (1047-118). Learn More »
This eagle pommel sword has beautifully detailed casting and chasing to its ornate hilt and a blade that was tri-colored: bright-etched, blued, and gilt. There is no maker’s mark, but some have… (2020-93). Learn More »
This is the second of two etched blade US Model 1840 musician’s swords by Horstmann that we recently got in. This has a clear “W.H.H.” etched on the blade in a curving ribbon on the obverse and… (2020-81). Learn More »
This sword is featured in figure 107 on page 108 of American Silver-Hilted, Revolutionary, and Early Federal Swords by Daniel D. Hartzler. It has a broad, curved single fuller blade with fire blued… (1085-03). Learn More »
$4,500.00
ON HOLD
This beautiful sword was presented by the Chatham Artillery as a prize for gunnery in 1848. The organization is an old and illustrious militia organization of Savannah, claiming descent from earlier… (870-99). Learn More »
This beautiful sword descended directly in the family of Brigadier General Franklin Pierce of New Hampshire (1804-1869,) 14th President of the United States. It comes with a notarized letter from the… (1096-01). Learn More »
$9,500.00
ON HOLD
The model 1840 Ames Medical Staff Sword was a unique design. Sword has a straight, diamond shaped double edge blade. Obverse side of blade etched canopy floral design with “U.S. Medical Staff”… (1047-54). Learn More »
The blade surface is bright with light scattered mottling and the upper third shows some light rub marks from drawing and returning the saber in the scabbard over time. Edge has several small nicks.… (1087-10). Learn More »
$750.00
ON HOLD
This popular pattern was classified by Peterson as a militia staff officer’s sword, but even he cautioned that it was carried by militia officers of every sort and also by some regular army officers… (998-125). Learn More »
This Artillery Short Sword is one of several variations of Confederate manufactured short swords. The hilt is cast like the US Model 1832 sans the American Eagle. Heavy cast brass hilt; the hilt is… (1061-64). Learn More »
The drawn sword meas. approx. 41.00 inches from point to pommel. The blade itself is very bright with just the slightest scattered mottling and a point that has a slight bend in the last 0.50 inch.… (998-143). Learn More »
$4,995.00
Originally $5,595.00
This classic Confederate cavalryman’s saber with its original scabbard made by Louis Froelich is in very good condition, complete and original. The hilt is the typical Froelich style with a Roman… (870-557). Learn More »
Topographical Engineer swords extremely scarce to begin with and this is a “one-off,” custom-made example by Ames with a scaled down blade and scabbard for a specific officer in that elite corps.… (870-598). Learn More »
New patterns of swords for the U.S. army were developed from 1832 to 1834. This elegant smallsword pattern (variously called by collectors the 1832 or 1834 pattern) was designated for officers of… (870-325). Learn More »
Cast brass cross guard, grip, and pommel with nice mellow patina. Each end of the cross guard features an eagle head with coiled snake clutched in its beak. An oval with “MA” is in the center. At… (266-1002). Learn More »
The 1852 US Naval officer’s sword was a beautiful design that continues in use, though with scaled down blade, hilt and mounts. This is a beautiful example of the Civil War version by Ames. The… (172-5509). Learn More »
$2,950.00
ON HOLD
Eagle quillon, gold washed Collins blade. Tiffany / Collins production. Manufactured: Hartford, CT. Maker: Collins / Tiffany Year: Civil War Model: M1860 Cavalry Officer Size: 35 inch blade Condition:… (790-09). Learn More »
Manufactured: Unknown Maker: Unknown Year: 1815-1825 Model: Eagle Head Size: 33.00” Condition: VG Early saber for a cavalry or mounted officer. Brass eagle head has heavy attic patina and has a… (790-10). Learn More »
Among the new standardized sword patterns adopted by the U.S. Army between 1832 and 1834 was a short sword was modeled on the French 1816 pattern for artillerymen on foot. Looking like an ancient… (870-465). Learn More »
Mower General Hospital, first known as Chestnut Hill Hospital, was one of the largest U.S. General Hospitals. Planned and built in 1862, it opened in early 1863 and could hold 3600 patients. Covering… (870-613). Learn More »
The gilded brass hilt of this sword features a bust of Columbia with a liberty cap that combines the personification of America somewhat with the bust of a classical warrior since she also wears a… (490-2158). Learn More »
Smith, Crane and Company pieces are scarce. They were only in business from 1858 through 1862, retailing military goods in New York City. Their swords were imported, of German make and likely by… (870-263). Learn More »
This rare sword is pictured on page 272 of Thillmann’s U.S. Army Swords. Not only is it from the first year of production by Ames, it is the scarce “Type-1” with shorter grip and heavier blade… (870-640). Learn More »
$13,500.00
ON HOLD
Maker mark: reverse ricasso, “C. Roby & Co. / W. Chelmsford,/ Mass.” Medium bright blade, measuring 32” in length, 1.125” in width at base. Blade etched with handsome vine & leaf, a… (1111-02). Learn More »
$1,250.00
ON HOLD
This cavalry officer’s saber is likely very early war and could possibly be typed as “transitional” since it uses an 1833-style quill back blade, but with a plain brass hilt of the 1840/60… (870-250). Learn More »
This is not, “just like the one in the book.” It is the one in the book: illustrated on page 411 of Thillman’s classic “Civil War Army Swords.” These non-regulation swords with steel hilts… (870-426). Learn More »
Introduced in 1840 for army surgeons and assistant surgeons, this sword is in just the kind of condition you like to find in piece coming out an estate: just enough age to the hilt and scabbard… (809-96). Learn More »
$2,350.00
Originally $2,750.00
Adopted for officers “of the general staff and staff corps” in 1860, this pattern was also used by general officers. Peterson incorrectly designated it a, “staff and field officer’s sword,”… (870-398). Learn More »
Still known by some collectors as the “Peterson 75” from the figure number in the classic “American Sword,” this imported in some quantity and liked by many officers as a field sword for its… (870-432). Learn More »
This presentation grade Ames 1860 Pattern Staff Officer’s Sword has the superior design and finish of Ames’ highest quality work, with all the decorative elements deeply cast, chased by hand, and… (870-400). Learn More »
This beautiful and unique, custom order officer’s sword, formerly in the Kevin Hoffman collection, is illustrated on pages 286-287 of Thillmann’s essential “Civil War Army Swords.” It also has… (870-440). Learn More »
$11,500.00
ON HOLD
This wakizashi, the traditional Japanese short sword that would be paired with a longer katana, has a paper label glued to the upper scabbard that we have not translated, but the overall look and… (770-917). Learn More »
John Thillmann did not uncover any 1840 or 1860 cavalry officer’s sabers made by Wester in the survey conducted for his essential Civil War Cavalry and Artillery Sabers, published in 2001, and only… (870-267). Learn More »
John W. Gregg was Aide-de-Camp to General McArthur when the latter launched a devasting attack on the left flank of Hood’s line in front of Nashville on December 16, 1864, destroying half of… (870-395). Learn More »
This custom-made 1850 foot officer’s sword apparently follows an old tradition of using an heirloom blade for a member of the family once again going off to war. The hilt is the regulation pattern… (870-642). Learn More »
This unusual cavalry officer’s saber utilizes an 1840 style cavalry officer’s hilt and an 1861 dated and inspected blade by Ames. The sword is in excellent condition overall and the pommel shows… (870-114). Learn More »
Introduced in 1841, the 1840 officer’s sword was a hybrid of older French, British and Prussian patterns. It has a straight, cut and thrust blade, single-edged with rudimentary false edge and single… (490-2149). Learn More »
This very pretty U.S. non-regulation sword dating about 1840 has a U.S. eagle on the counterguard and a beautiful bright-etched blade with strong frosting and vivid etching that includes a matching… (490-2159). Learn More »
This beautiful silvered Ames 1832/34 pattern officer’s sword is illustrated and discussed on pages 71-72 of Thillmann’s U.S. Army Swords. The scabbard is silvered en suite with the hilt and… (870-311). Learn More »
An extremely rare US Army 1850 pattern staff and field sword made by Ames, one of only 67 dated and inspected by the U.S. government in 1861, presented to D.W. Flagler, an 1861 graduate of West Point… (870-643). Learn More »
This is a scarce example of the 1832 pattern sword belt and short sword for infantry sergeants and company musicians. This was regulation until the 1840 patterns were adopted, produced, and issued,… (1097-22). Learn More »
The U.S. Revenue Cutter Service and Life Saving Service merged to create the modern U.S. Coast Guard in 1915. They adopted the U.S. Navy 1852 pattern officer’s sword (still in use,) altering it… (1047-79). Learn More »
Changing from a non-combatant chaplain charged with saving souls to a field-grade combat officer responsible for taking lives, and then returning to civilian life in academia obviously requires some… (870-397). Learn More »
Presented here is a nice example of a Boyle and Gamble Confederate foot officer’s sword complete with its original leather scabbard. Typically carried by many Southern infantry officers during the… (801-126). Learn More »
$4,000.00
Originally $5,000.00
This beautiful and unique sword belonging to William Feay Shellman of the Oglethorp Light Infantry and 8th Georgia Volunteers is pictured on p. 151 of The Ames Sword Company by Hamilton, and in… (870-300). Learn More »
Sword is identified to Charles W. Clanharty [Clauharty] who rose to be Major and then Lieutenant-Colonel (not mustered) in the 141st New York Infantry. The drawn sword meas. approx. 37.25 inches from… (846-118). Learn More »
$3,950.00
Originally $4,350.00
Louis Froelich was a tough man to keep down. A skilled “mechanic,” he emigrated from Bavaria in early 1861, settled in Wilmington, NC, ran a button factory and then set to making edged weapons for… (846-142). Learn More »
$2,250.00
Originally $2,500.00
ON HOLD
This very nice US Model 1850 Staff and Field officer’s sword by Willard and Hawley of Syracuse, NY, has great blade etching that includes an officer holding a U.S. flag aloft as he surmounts enemy… (846-143). Learn More »
$4,950.00
Originally $5,500.00
This is the Model 1850 Staff & Field Officer sword. It is single-edged with a false edge extending back about 11 inches from the point. There is a wide fuller which runs from the ricasso to the… (E2901). Learn More »
$1,950.00
ON HOLD
This is a unique opportunity to acquire a one-of-a-kind U.S. cavalry officer’s saber. Frederick W. Widmann emigrated to the U.S. in 1816 and set up business in Philadelphia as a die-sinker and… (870-279). Learn More »
The sword is a non-regulation imported 1850 pattern officer's French manufactured sword. It is 36 ¾ inches overall with a slightly curved 31 3/8-inch blade with a double fuller. The blade appears to… (1043-366). Learn More »
$2,500.00
Originally $2,950.00
This example is of the shortened Second Model sword pattern with its scabbard. The rounded iron pommel and guard with a sword-knot hole distinguish it from the First Model. First and Second… (1000-832). Learn More »
John Clark Merriam, born in Lexington, Mass., in 1829 was educated in France, graduating as a mechanical engineer from the College Bourbon in 1847. It made sense, then, that in August 1861 he joined… (1117-85). Learn More »
Robert Bethel Browne did two tours of duty as an army surgeon in the Civil War: the first as the Surgeon of the 31st New Jersey, when he acquired this sword, and then as an Assistant Surgeon in the… (1117-117). Learn More »
This inscribed 1850 pattern staff and field officer’s sword by Schuyler, Hartley and Graham was carried by Charles Curie, who served almost two years in the Hawkins Zouaves, 9th NY, as an enlisted… (1117-112). Learn More »
This 1850 foot officer’s sword is nicely inscribed on the face of the pommel, “Henry Warren / 7” Maine / Regt.” The hilt and blade are regulation, with brass pommel cast and chased with leaves… (1117-116). Learn More »
Tiffany & Company is acknowledged as the finest producer of presentation swords in the 1860s and this is good example of their work, showing detailed craftsmanship and refined taste. The deeply… (870-172). Learn More »
$16,000.00
Originally $18,000.00
Very few 1832 pattern short swords are state marked despite the fact that the U.S. government supplied probably 75 percent of their purchases to states under the 1808 militia act and many were… (1102-52). Learn More »
$850.00
SOLD
Volunteer militia companies might operate under their own charters, which let them set their own regulations for uniforms and equipment. In this case, the officer has selected a silver mounted (brass,… (1117-92). Learn More »
This is a scarce 1862-dated U.S. government contracted and inspected M1850 foot officer’s sword inscribed to an officer with service against Indian raiders in California and Arizona, who got a… (1117-113). Learn More »
$4,950.00
ON HOLD
Horsehead pommel swords are scarce. Predators like lions and eagles made an easy jump to military swords from hunting swords, but horses, partners in the hunt, are far less common, though particularly… (1117-82). Learn More »
This sword by Horstmann is in excellent condition, incorporates the South Carolina state seal on the guard, and dates about 1840, the era of the “elegant elite,” volunteer militia companies that… (1117-93). Learn More »
This very nice 1850 Foot Officer’s sword by Horstmann has a non-regulation, but very practical metal scabbard and is inscribed inside the guard in script, “Lt. George Kenney.” The volunteer… (1117-114). Learn More »
This sword has all the characteristics you look for in a Confederate cavalry saber. The brass hilt has a nice, untouched, mellow patina and follows the U.S. pattern in general terms, but is rather… (648-15). Learn More »
A nice example of the classic "wrist breaker" used before and during the Civil War. The curved blade is over 35” in length. Stamped at the ricasso is “C. HAMMOND”. There are no other marks on… (870-458). Learn More »
This is a very nice example of a Klingenthal made U.S. Model 1850 Staff and Field Officer’s sword with an 1861 presentation. The sword follows the U.S. regulations, which derived from French… (766-1064). Learn More »
Virgil Price produced military swords during the Civil War and then shifted back into Masonic regalia and swords afterward. This seems to be a wartime 1860 staff sword that he repurposed and is a nice… (766-1451). Learn More »
This sword is an example of a non-regulation Foot Officer’s sword imported for use during the Civil War. This simple sword is complete with its steel scabbard. The slightly curved steel blade… (870-266). Learn More »
$500.00
ON HOLD
This is a less commonly found 1862-dated Mansfield and Lamb model 1860 cavalry saber with a scabbard bearing matching inspector’s initials. The company supplied 10,408 sabers in 1861 and 1862, and… (648-14). Learn More »
$850.00
ON HOLD
Cast brass cross guard, grip, and pommel; plated. Each end of the cross guard features an eagle head with coiled snake clutched in its beak. The Athenian helmet seal is in the center. At some time… (266-1003). Learn More »
$350.00
Originally $450.00
This is the US Marine Corps Model 1875 officer’s sword that revived the mameluke pattern laid aside in 1859. This example has ivory grips and dates from the Spanish-American War and pre-World War… (266-1006). Learn More »
$1,100.00
Originally $1,500.00
This sword is in spectacular condition and comes from the collection of William Cooper. It is a beautiful example of the post-1922 USMA West Point cadet’s sword, which replaced the 1870s pattern,… (266-1005). Learn More »
$350.00
Originally $450.00
This sword came from the effects of U.S. Navy Pilot, Lt. Arthur Dzendolet (1914-1942.) Formerly in the well known and respected Bill Cooper collection, the sword is in mint condition with strong gilt… (266-1008). Learn More »
$475.00
Originally $975.00
SOLD
This sword has a wonderful undisturbed patina on the exterior and bright blade with vivid etching that really catches the eye when drawn. It also bears a great 1860 inscription to the Adjutant General… (870-343). Learn More »
This beautiful, high quality sword by Ames follows the printed regulations for the 1860 sword for “officers of the general staff and staff corps” except on two points. Rather than horn, it a… (870-399). Learn More »
This is a circa 1960s sword from a Class of 1932 cadet. Cast brass cross guard, grip, and pommel; plated. Each end of the cross guard features an eagle head with coiled snake clutched in its beak. The… (266-1004). Learn More »
$450.00
ON HOLD
The drawn sword meas. approx. 35.50 inches long from point to pommel. The immaculately clean and bright blade meas. approx. 30.00 inches long and has an unstopped fuller approx. 19.25 inches long. The… (E2388). Learn More »
This is a scarce version of the 1840/41 pattern general officer’s sword by Horstmann in very good condition. This was formerly in the superb collection of Kevin Hoffman, who felt it was a very early… (870-346). Learn More »
This E.J. Johnston Confederate officer’s sword has an etched blade identifying both the maker and the officer who carried it when killed at Chancellorsville. It was the subject of an article and… (846-238). Learn More »
$16,500.00
Originally $21,000.00
Sword measures approximately 34 ½” overall with a 28” blade. Blade is mostly bright with a few scattered patches of darker spotting and light surface rust. Obverse ricasso is marked “US / 1863… (462-284). Learn More »
This is an excellent example of the “open guard” style of foot officer’s sword made by Boyle, Gamble, and McFee of Richmond, VA, which bears their company name and address cast in raised letters… (870-599). Learn More »
As Thillmann notes, the 1860 Staff and Field is a misnomer derived from Peterson’s classification of the 1860 Staff sword that morphed into the 1872 Staff and Line officers’ sword. This one dates… (870-401). Learn More »
This is a very nice Tiffany made officer’s sword. We still tend to call it the 1860 Staff and Field officer’s sword, though as Thillmann notes, the proper label should be the 1872 Staff and Line… (870-405). Learn More »
Showing 1 to 210 out of 210
Historical Firearms Stolen From The National Civil War Museum In Harrisburg, Pa »
U.s. 1859 Pattern Dragoon/ Cavalry Saddle Blanket »
Rhode Island State Contract Union Enlisted Foot Great Coat »
Theft From Gravesite Of Gen. John Reynolds »
Rare Confederate Sharps Carbine Cartridges With Jefferson Davis Connection »
Topographical Engineer swords extremely scarce to begin with and this is a “one-off,” custom-made example by Ames with a scaled down blade and scabbard for a specific officer in that elite corps. First established as a bureau within the War… (870-598). Learn More »