Cartridges & Gun Tools

Showing 41 to 60 out of 114


WINCHESTER RIFLE PRIMING TOOL

WINCHESTER RIFLE PRIMING TOOL

Maker-marked: “Manufactured by the/ Winchester Rep. Firearms Co./ 32 W.C.F./ Patent Oct. 20. 1874. Nov. 7.82.” Pliers-shape, measuring 8.5” in length, 2.75” in width. Exhibits light pitting.… (516-246). Learn More »

.44 CALIBER BULLET MOLD

.44 CALIBER BULLET MOLD

Mold is in good working condition with light surface rust. The cavity itself is in good condition and casts round bullets. One arm is marked with a “5”. Measures 4 ¼” long.   … (490-732). Learn More »

.44 CALIBER BULLET MOLD

.44 CALIBER BULLET MOLD

Iron mold is in good condition. Mold makes .44 caliber round ball bullets. Interior is very good with sharp mold cavities and clean surfaces. Exterior has a dark patina with light surface rust and… (490-734). Learn More »

.44 CALIBER BULLET MOLD

.44 CALIBER BULLET MOLD

Iron mold is in very good condition. Mold makes .44 caliber round ball bullets. Interior is very good with sharp mold cavities and clean surfaces. Exterior has some light wear from use and a dark… (490-733). Learn More »

LABEL AND WRAPPER FOR 10 BUCKSHOT CARTRIDGES

LABEL AND WRAPPER FOR 10 BUCKSHOT CARTRIDGES

Paper wrapper and label only for 10 each Buckshot cartridges in caliber .69 originating from the Columbus Ordinance Depot dated 1862. Measures 3 ½” by 2 ¾” by 1 ½” with some very minor label… (M24006). Learn More »

$550.00
Originally $600.00

NAVAL LABORATORY CRATE FOR BUCK SHOT CARTRIDGES

NAVAL LABORATORY CRATE FOR BUCK SHOT CARTRIDGES

Dovetailed wooden crate that meas. approx. 13.25 inches long x 8.00 inches wide x 8.50 inches high. The wood has much of the original dark finish but is worn on the edges and lid. There are also… (853-73). Learn More »

$650.00
Originally $750.00

PACKAGE OF 4MM FLOBERT PRIMED CASES

PACKAGE OF 4MM FLOBERT PRIMED CASES

Here is a round pasteboard box of primed cases for a 4mm Flobert pistol. Printed label on lid, printed red “tape” around side. Empty cases have “KC” headstamp. Good condition, but unknown… (172-4106). Learn More »

MODEL 1855 TUMBLER PUNCH

MODEL 1855 TUMBLER PUNCH

Original tumbler and band spring punch. Throughout the 45 years of issuance (from 1855-1900) tumbler punches were manufactured both with a U.S. stamp and without. This particular specimen does NOT… (853-125). Learn More »

$25.00
Originally $30.00

SCARCE EXCAVATED .69 CALIBER RIFLED MUSKET CARTRIDGE BY HAZARD POWDER COMPANY

SCARCE EXCAVATED .69 CALIBER RIFLED MUSKET CARTRIDGE BY HAZARD POWDER COMPANY

This is an excavated cartridge for .69 caliber rifled muskets made by the Hazard Powder Company.  Constructed using a regulation .69 caliber, 3-groove minie ball, Hazard used a powder charge that was… (M25374). Learn More »

BRASS POWDER FLASK

BRASS POWDER FLASK

Brass powder flask is missing the spout. One side of flask features a raised image of a pheasant, while the other is plain.  Body of flask measures approximately 6 ¾” long. Surface has some minor… (172-4420). Learn More »

REVOLUTIONARY WAR ERA POWDER HORN ID’D TO ALEXANDER RHOADES, 46th PENNSYLVANIA INFANTRY

REVOLUTIONARY WAR ERA POWDER HORN ID’D TO ALEXANDER RHOADES, 46th PENNSYLVANIA INFANTRY

This powder horn was purchased at a sale in 1947 from John Rhoades, who documented that this belonged to his father, Alexander Rhoades, who carried it in the Civil War. Alexander Rhoades was a… (377-13). Learn More »

IRON MUSKET BALL MOULD

IRON MUSKET BALL MOULD

Iron scissor-type mould to cast lead a lead round ball for muskets.  Single cavity mould with spout and sprue cutter in handle. Cavity measures approximately 0.62”. The number “18” is stamped… (490-724). Learn More »

BOX OF FLOBERET 4mm AMMO

BOX OF FLOBERET 4mm AMMO

Top of box is stamped with, “250 FLOBERT- KAPSLELN, lange, CALIBER 4mm”. Lid lifts off to reveal over ninety pieces still remaining. Measures 2 ¾” across. Box is in very good condition with… (172-4108). Learn More »

VERY RARE FULL TIN OF SHARPS PELLET PRIMERS

VERY RARE FULL TIN OF SHARPS PELLET PRIMERS

This is a soldered tin box with separate lid containing 20 tubes of pellet primers for the Sharps carbine or rifle.  The tubes are made of thin sheet brass and each contains 25 copper priming discs,… (M25301). Learn More »

BOX FOR SHARPS RIFLE CARTRIDGES & ONE LINEN CARTRIDGE

BOX FOR SHARPS RIFLE CARTRIDGES & ONE LINEN CARTRIDGE

This is a pasteboard box and lid with a printed paper label for Sharps Rifle cartridges. The label reads, “TEN / LINEN CARTRIDGES, / FOR SHARPS RIFLE, / CAL. 52-100. / WITH 12 PERCUSSION CAPS, /… (172-4181). Learn More »

FOREIGN COMBINATION GUN TOOL

FOREIGN COMBINATION GUN TOOL

Gun tool is Y shaped with three screwdriver blades and a scraper end. Very clean with no rust. The four arms measure- 4”, 3” and 2 ½” & 2 ½”.  … (490-952). Learn More »

Y-SHAPED GUN TOOL FOR PERCUSSION MUSKET

Y-SHAPED GUN TOOL FOR PERCUSSION MUSKET

A rough copy of an English Brunswick musket tool probably of Indian or Pakistani origin and referenced in “Gun Tools: Their History and Identification”. The three arms on this iron tool feature a… (490-943). Learn More »

UNOPENED PACK OF .58 MINIE BALLS -- U.S. ARSENAL PACK

UNOPENED PACK OF .58 MINIE BALLS -- U.S. ARSENAL PACK

This is a full, unopened pack of rifled musket cartridges. The plain paper wrapper is in super tight condition. It is clean and free of tears, with only one small (1/4-inch round) stain on the paper.… (490-891). Learn More »

.69 CALIBER ROUNDBALL CARTRIDGE

.69 CALIBER ROUNDBALL CARTRIDGE

Regulation cartridge containing a simple round ball. Tied with a string. This could have been for .69 caliber single-shot horse pistols or .64 caliber Hall carbines. Complete and solid; good… (490-909). Learn More »

FULL BOX OF PATENTED MINIE BALL CARTRIDGES

FULL BOX OF PATENTED MINIE BALL CARTRIDGES

This is a complete package of .58 caliber cartridges for rifle muskets as manufactured by Johnston & Dow under their own patent. Package consists of a cardboard box wrapped in a pre-printed paper… (490-565). Learn More »


Showing 41 to 60 out of 114

featured item

MODEL 1841 NAVAL OFFICER’S SWORD IDENTIFIED TO SIMON BACKUS BISSELL

Simon Backus Bissell was born in Fairlee, Vt., on October 28, 1808. He was appointed Midshipman on November 6, 1824, Passed Midshipman on June 4 1831, and Lieutenant December 9, 1837. At the beginning of the Mexican-American War, he was assigned to… (870-63). Learn More »

Upcoming Events

22
Jan

Coming up Jan. 27 - 28: Gettysburg Gun Show at the Allstar Events Complex at the Eisenhower Inn Learn More »