site search
online catalog
Cartridges & Gun Tools
Showing 81 to 100 out of 104
BULLET MOLD FOR .45 CALIBER, COLT M1878 REVOLVER
Iron, two cavity bullet mold for the .45 caliber Colt Model 1878 revolver. It casts two elongated bullets with grooves. These are the “.45 Long Colt” bullets. Sprue cutter is attached to the top… (490-4399). Learn More »
M-1855 MAINSPRING VISE FOR CONVERSION MUSKETS
Mainspring vise for the many types of early muskets that were converted to percussion ignition. Typical vise mechanism with offset bar to accommodate the older flintlock mainsprings. Excellent… (490-4380). Learn More »
COMPARTMENTED POWDER FLASK FOR THE AMERICAN MARKET, LIKELY FOR A CASED PAIR OF PHILADELPHIA DERRINGERS
This powder flask was certainly made for the American market. The bottom is fitted with two small, round hinged covers for interior compartments, each with an eagle with raised wings, a U.S. shield on… (30-2245). Learn More »
$575.00
Originally $695.00
RARE BULLET MOLD FOR .31 CALIBER "WELLS FARGO" M-1849 COLT REVOLVER
Very rare iron, two cavity bullet mold for the .31 caliber "Wells Fargo" Colt revolver. It casts one round ball and one elongated bullet. There is no sprue cutter. Marked "COLT'S / PATENT" across the… (490-4400). Learn More »
DIXON & SON MARKED POWDER FLASK
This is a pretty powder flask with an adjustable spout and brown lacquered body impressed with a basket weave design on the faces and leaves curling up on either edge, with small brass suspension… (1184-74). Learn More »
HAWKSLEY MARKED POWDER FLASK
Good condition, plain body powder flask with prominent edge seam and adjustable spout measured in drams. Stamped “G.& J.W. HAWKSLEY / SHEFFIELD” on the top of the collar. Constructed with… (1184-71). Learn More »
TOMPION FOR BURNSIDE CARBINE
A wood tompion for a cavalryman’s .54 caliber Burnside carbine. This has the characteristic ball top, pointed tip, and cruciform slotted body of the Burnside tompions. They are occasionally seen in… (490-3945). Learn More »
HAWKSLEY POWDER FLASK
This has a wonderful profusion of design elements that seems to combine rococo foliate C-scrolls symmetrically arranged with some geometric ornaments- something in the “too much is not enough”… (1184-75). Learn More »
HAWKSLEY POWDER FLASK
A nicely decorated sportsman’s powder flask decorated in two panels with a hunting dog at top and the hunter’s prey at bottom: two stags with prominent antlers standing over a row of five less… (1184-73). Learn More »
SMALL HUNTER’S POWDER HORN
This horn dates roughly 1820-1850. It is a plain, working powder horn only about 5 ¼ inches long, a size sometimes thought to be just for priming powder for a flintlock, but convenient enough to be… (1184-79). Learn More »
SMALL HUNTER’S POWDER HORN
This horn dates roughly 1820-1850. It is a plain, working powder horn only about 5 3/4 inches long, a convenient size for pocket or hunting bag. Sometimes considered a small horn just for priming… (1184-77). Learn More »
“DUG” .50 CALIBER SMITH “RUBBER CASE” CARTRIDGES
Used in the Smith carbine extensively during the early years of the Civil War, we have several specimens of these unusual .50 caliber “rubber case” cartridges in excavated “relic”… (2022-1238). Learn More »
.45 CALIBER IRON PISTOL BALL MOLD & BARREL TOOL
Iron scissor-type mold to cast a lead round ball for revolvers. Measures approximately 3.5” long overall. Single cavity mold with spout. Sprue cutter is formed between the two handles. Cavity… (1164-46). Learn More »
VERY LARGE POWDER FLASK BY J. DIXON & SONS, SHEFFIELD
This very large flask has to have been for shotguns. Constructed with a copper body, with brass top and spout. Measures approximately 11” tall x 5” at widest point. Unadorned body. Thumb tab and… (172-5639). Learn More »
POWDER FLASK FOR REVOLVERS
This flask is for early pocket model revolvers. Constructed with a copper body, with brass top and spout. Measures approximately 6” tall x 2.75” at widest point. Both sides are plain. Thumb tab… (172-5638). Learn More »
RELIC M1873 MAYNARD BULLET MOLD
Iron bullet mold measures approximately 7 ½” long. Two halves pinned with rivet and has floating sprue cutter. Iron is pitted but not badly; could be “dug” or out of a barn. Still opens and… (1117-238). Learn More »
BRASS BULLET MOLD FOR “PICKET” TYPE BULLET
Scissor-type mold made of brass. Casts a .44 caliber “picket” or “sugarloaf” style of bullet with rounded base. Measures 6 ½” overall. Brass has a blotchy, dark patina. … (1117-234). Learn More »
ENGLISH PERCUSSION CAP PACK
This is a “pulp bag” of percussion caps as manufactured at the Royal Laboratory at Woolwich, England. Each pack was to contain 15 copper percussion caps. Packages are full of caps and twisted… (M25673). Learn More »
VERY NICE PEACOCK POWDER FLASK ASSOCIATED WITH COLT ROOT REVOLVERS
This flask is French made and often found cased with Colt 1855 New Model Root Revolvers, likely being purchased from the maker by one of Colt’s larger dealers for use in his cased Colts. (See… (30-2209). Learn More »
$850.00
ON HOLD
.54 CALIBER CARTRIDGE FOR FAYETTEVILLE RIFLE
Dark worn paper cartridge with conical bullet in nose. The body of the cartridge is complete but the paper looks weary. The tail has separated from the cartridge due to age and weakness of the… (169-280). Learn More »
$200.00
Originally $250.00
Showing 81 to 100 out of 104
Most Popular
Historical Firearms Stolen From The National Civil War Museum In Harrisburg, Pa »
Theft From Gravesite Of Gen. John Reynolds »
Selection Of Unframed Prints By Don Troiani »
Fine Condition Brass Infantry Bugle Insignia »
featured item
VERY SCARCE US GOVERNMENT PURCHASE MERRILL RIFLE
This Merrill breechloading rifle is one of just 566 contracted for by the US government in December 1861 and delivered from August through December 1862, inspected and marked by Zadock Butt, and known to have been issued to several Union regiments,… (490-7012). Learn More »
site search
