site search
online catalog
Firearms
Showing 261 to 280 out of 287
MODEL 1892 WINCHESTER RIFLE
Serial number 70464, this Model 1892 Winchester is .38 WCF, was made in 1894, and rates near Fine for overall condition with 80% thin shiny blue on the receiver, stronger on the right, with some… (169-533). Learn More »
SYKES MARKED FLASK FOR POCKET OR MUFF PISTOLS
This small copper and brass flask is in near mint condition with a very pleasing brown lacquer tone to the copper body, medium untouched patina to the brass collar and spout, and vibrant blue to the… (30-2246). Learn More »
MILITARY FLAP HOLSTER FOR A .31 CALIBER REVOLVER
This is a scarce example of a privately purchased belt holster with a military style flap to carry a small .31 caliber percussion revolver, typical of those carried for personal defense by officers… (480-221). Learn More »
$446.00
Originally $495.00
DOUBLE-ACTION STARR .44 REVOLVER, LIKELY DELIVERED IN APRIL 1863
This double-action Starr revolver is complete, all original, and rates about Excellent for condition, with better than 80 percent original finish, sharp lettering numbering, and very pretty, unmarred… (490-2988). Learn More »
$5,950.00
ON HOLD
CONFEDERATE ORDNANCE “CAPTURED AND COLLECTED” BRIDESBURG RIFLE MUSKET
Some 200,000 thousand firearms captured or collected by CS Ordnance teams and civilians, along with perhaps another 50,000 turned in by CS units, went through the cleaning and/or repair… (1164-13). Learn More »
$3,250.00
ON HOLD
.45 CALIBER IRON PISTOL BALL MOLD & BARREL TOOL
Iron scissor-type mold to cast a lead round ball for revolvers. Measures approximately 3.5” long overall. Single cavity mold with spout. Sprue cutter is formed between the two handles. Cavity… (1164-46). Learn More »
VERY LARGE POWDER FLASK BY J. DIXON & SONS, SHEFFIELD
This very large flask has to have been for shotguns. Constructed with a copper body, with brass top and spout. Measures approximately 11” tall x 5” at widest point. Unadorned body. Thumb tab and… (172-5639). Learn More »
POWDER FLASK FOR REVOLVERS
This flask is for early pocket model revolvers. Constructed with a copper body, with brass top and spout. Measures approximately 6” tall x 2.75” at widest point. Both sides are plain. Thumb tab… (172-5638). Learn More »
CIVIL WAR FLAP HOLSTER FOR M1849 POCKET MODEL REVOLVER
This is a black leather holster made for revolvers. The leather still shows the “profile” of a revolver cylinder and barrel. A .31 caliber “pocket” model with long barrel fits into this… (172-5636). Learn More »
BLUED SMITH & WESSON NO. 2 ARMY REVOLVER
This is a Smith & Wesson, No. 2, Old Model Army Revolver. It is a .32 caliber, six-shot revolver with a 5” barrel, rosewood handles. Post-Civil War serial number 60737. Production began in 1861,… (1000-452). Learn More »
RELIC M1873 MAYNARD BULLET MOLD
Iron bullet mold measures approximately 7 ½” long. Two halves pinned with rivet and has floating sprue cutter. Iron is pitted but not badly; could be “dug” or out of a barn. Still opens and… (1117-238). Learn More »
CIVIL WAR KERR REVOLVER HOLSTER ON BELT
This is a black leather holster made to accommodate the Kerr revolver. The leather still shows the “profile” of a revolver cylinder. The holster “pocket” measures approximately 9 ¼” along… (1117-97). Learn More »
BRASS BULLET MOLD FOR “PICKET” TYPE BULLET
Scissor-type mold made of brass. Casts a .44 caliber “picket” or “sugarloaf” style of bullet with rounded base. Measures 6 ½” overall. Brass has a blotchy, dark patina. … (1117-234). Learn More »
ENGLISH PERCUSSION CAP PACK
This is a “pulp bag” of percussion caps as manufactured at the Royal Laboratory at Woolwich, England. Each pack was to contain 15 copper percussion caps. Packages are full of caps and twisted… (M25673). Learn More »
VERY NICE PEACOCK POWDER FLASK ASSOCIATED WITH COLT ROOT REVOLVERS
This flask is French made and often found cased with Colt 1855 New Model Root Revolvers, likely being purchased from the maker by one of Colt’s larger dealers for use in his cased Colts. (See… (30-2209). Learn More »
$850.00
ON HOLD
CONFEDERATE CAPTURED US CONTRACT MODEL 1861 MUSKET BY NORWICH
This contract Model 1861 by the Norwich Arms Company is in good condition with a very clear and unmistakable “Q” stamped just forward of the trigger guard showing that it was captured, cleaned and… (362-866). Learn More »
“CAPTURED & COLLECTED” – CONFEDERATE REISSUED FIREARMS
Knott, USN (ret.), Capt. Steven W. Published by The Horse Soldier, 2019. Softcover, 80 pp., heavily illustrated with color photographs. This monograph examines the Confederate system used to recover,… (ST501179). Learn More »
THE CONFEDERATE ENFIELD - NEW REVISED EDITION
***NEWLY REVISED EDITION, JUST ARRIVED FROM THE PRINTER!*** Written by Capt. Steven W. Knott, USN (Ret). Softcover, 54 pages. Contains minor corrections from the first edition, as well as a new… (ST501177). Learn More »
.54 CALIBER CARTRIDGE FOR FAYETTEVILLE RIFLE
Dark worn paper cartridge with conical bullet in nose. The body of the cartridge is complete but the paper looks weary. The tail has separated from the cartridge due to age and weakness of the… (169-280). Learn More »
$200.00
Originally $250.00
.577 CALIBER ENGLISH ENFIELD PATTERN CARTRIDGE
Fabricated by Ludlow Brothers of Birmingham, England. Nice display in a 8.25” x 12.25” Riker case. Photocopy of an original wrapper at top with info sheet below, and then the cartridge at the… (M24051). Learn More »
Showing 261 to 280 out of 287
Most Popular
Historical Firearms Stolen From The National Civil War Museum In Harrisburg, Pa »
Theft From Gravesite Of Gen. John Reynolds »
Selection Of Unframed Prints By Don Troiani »
Fine Condition Brass Infantry Bugle Insignia »
featured item
FIRST ARMY CONTRACT SPENCER RIFLE: MICHIGAN CAVALRY BRIGADE AT GETTYSBURG
The story of Spencer rifle contracts, deliveries, and government payments for purchases is complicated. Laid out by Roy Marcot in his book on Spencer’s and in a 1997 article in “Man at Arms” by Wiley Sword, who has established the serial number… (490-7231). Learn More »
site search
