Bayonets

Showing 61 to 75 out of 75


MODEL 1866 WINCHESTER BAYONET

MODEL 1866 WINCHESTER BAYONET

This in a Model 1866 bayonet for the .44 caliber Winchester musket. Metal is clean and bright with scattered light pitting overall. Locking ring is perfect. Completely unmarked. Measures approximately… (1037-461). Learn More »

US MODEL 1812 .69 CALIBER SOCKET BAYONET

US MODEL 1812 .69 CALIBER SOCKET BAYONET

Bayonet manufactured for the US model 1812 Springfield Flintlock Musket. Socket bayonet measures 20” overall, blade length 16.50”. Stamped “US” on the flat of blade. Inspector letters “JA”… (1037-468). Learn More »

MODEL 1855 SABER BAYONET

MODEL 1855 SABER BAYONET

The blade is approximately 21 ¼” length. No stampings on the ricasso. Fuller is about 14” long. It is a dark brown color with patchy oxidation. There are no nicks on the blade. The hilt is cast… (1000-1051). Learn More »

SABER BAYONET FOR THE SHARPS & HANKINS OR THE SHARPS NAVAL RIFLE - NO SCABBARD

SABER BAYONET FOR THE SHARPS & HANKINS OR THE SHARPS NAVAL RIFLE - NO SCABBARD

Overall the bayonet meas. approx. 25.25 inches long. The blade itself is 20.25 inches long with a semi-bright surface and moderate scattered mottling with minor pitting in the point area. There are… (172-5535). Learn More »

EXCAVATED BOYLE, GAMBLE AND MCFEE BAYONET ADAPTER, 1ST MODEL

EXCAVATED BOYLE, GAMBLE AND MCFEE BAYONET ADAPTER, 1ST MODEL

Recovered in central Virginia. Bayonet adapters enabled rifles such as the Model 1817 and Model 1841, as well as Southern-made military rifles, to be mounted with bayonets without weakening barrels by… (1000-2326). Learn More »

SWORD BAYONET FOR THE WHITNEY PLYMOUTH 1861 NAVY RIFLE

SWORD BAYONET FOR THE WHITNEY PLYMOUTH 1861 NAVY RIFLE

US Navy Captain John A. Dahlgren had a penchant for ordnance development and recommended adoption of a .69 caliber rifle to the navy in the late 1850s. Some 10,000 were delivered from 1861 to 1864 and… (1037-402). Learn More »

WINCHESTER LEE MODEL 1895 STRAIGHT-PULL RIFLE BAYONET

WINCHESTER LEE MODEL 1895 STRAIGHT-PULL RIFLE BAYONET

The Winchester-Lee 1895 Straight-pull rifle was the primary issue long arm of both the US Navy and Marine Corps from 1895 to 1900 and thus at the forefront of American expansion to a global power. An… (1037-375). Learn More »

M1859 SHARPS SABER BAYONET

M1859 SHARPS SABER BAYONET

Saber-style bayonet for the Sharps Rifle. The overall length of this bayonet is 26 ½” while the graceful-looking, slightly curved blade itself is 21 ½” long. Bayonet was primarily intended for… (1037-406). Learn More »

MARKED REMINGTON SWORD BAYONET FOR THE FRENCH M1914 ROLLING BLOCK RIFLE

MARKED REMINGTON SWORD BAYONET FOR THE FRENCH M1914 ROLLING BLOCK RIFLE

At the beginning of World War One the French government contracted with Remington to start making its rolling block rifle again for issue to its service and support troops. The French government… (1037-397). Learn More »

DANISH MODEL 1854 SOCKET BAYONET

DANISH MODEL 1854 SOCKET BAYONET

Triangular socket bayonet with a blade that meas. approx. 19 3/8 inches long from the shoulder to the point with a socket that meas. approx. 2 11/16 inches long, not including the knuckle. Iron has a… (1000-1376). Learn More »

SABER BAYONET FOR “PLYMOUTH NAVY RIFLE” WITH SCABBARD

SABER BAYONET FOR “PLYMOUTH NAVY RIFLE” WITH SCABBARD

This fine Civil War edged weapon is an original saber bayonet made for the Whitney Model 1861 “Plymouth Navy Rifle”. Approximately 10,000 rifles with these sword bayonets were made. The blade is… (482-429). Learn More »

SHORTENED DUTCH / GERMANIC MID-18TH CENTURY BAYONET

SHORTENED DUTCH / GERMANIC MID-18TH CENTURY BAYONET

Blade measures 9 ½”, socket 3 ½” with a partially removed rear ring. Blade is 1 3/16” in width. Square sided neck. Some light pitting.   [ss] ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ THIS ITEM,… (377-16). Learn More »

EARLY AMERICAN BAYONET, MID-18TH CENTURY

EARLY AMERICAN BAYONET, MID-18TH CENTURY

Untouched attic condition. Socket measures 2 ¾” and has two cracks along lap seams, the entire length. Blade measures 15 ¾” long, 1 1/8” wide. Very narrow slot and short. Overall smooth nice… (377-19). Learn More »

RARE ‘DRAKE-ALTERATION’ SOCKET BAYONET FOR THE US M1841 ‘MISSISSIPPI’ RIFLE.

RARE ‘DRAKE-ALTERATION’ SOCKET BAYONET FOR THE US M1841 ‘MISSISSIPPI’ RIFLE.

Presented in fine condition is this scarce, original “Augustine J. Drake” altered socket bayonet made to fit M1841 Mississippi rifles modified with the Lindner breechloading system.  In 1861 the… (172-2221). Learn More »

$425.00
Originally $450.00
ON HOLD

BRITISH IMPORTED, CONFEDERATE USED BAYONET

BRITISH IMPORTED, CONFEDERATE USED BAYONET

Item meas. approx. 28.75 inches overall. The blade meas. approx. 23.75 inches long and is approx. 1.08 inches wide at the ricasso. Blade surface is bright with some scattered mottling. Heavier near… (344-158). Learn More »


Showing 61 to 75 out of 75

featured item

G.A.R. POST IMPRESSIVE SHELL-STRUCK WAR LOG: A “FRAGMENT” FROM CHICKAMAUGA

This impressive section of tree trunk was cut from the battlefield of Chickamauga and displayed in a Boston G.A.R. post. It measures about 36 by 16 by 14 inches and has embedded in it a ten-pound Parrott shell, the lower portion and iron sabot of… (365-11). Learn More »

Upcoming Events

08
Aug
Instagram