Showing 181 to 200 out of 268
Scarce .36 caliber Savage cartridge for Navy revolvers. Here is a cartridge that is rarely offered for sale in this fine condition. This style of cartridge was made by D.C. Sage of Middletown, CT.… (1212-114). Learn More »
The full title of this volume is “ELEY CARTRIDGES: A HISTORY OF THE SILVERSMITHS AND AMMUNITION MANUFACTURERS” by C. W. Harding and published by Quiller Press of Wykey, Shrewsbury, England in… (236-469). Learn More »
Moore revolvers used the .32 caliber self-contained metallic rimfire cartridge, which was available and convenient. They were not subject to damage by rough handling, weather resistant, and made a… (2023-2603). Learn More »
This small pistol flask is embossed with an attractive pair of oak leaf and acorn clusters in the top quarter, below which a long, thin, scrolling chevron with dots separates it from a pair of knotted… (490-5380). Learn More »
Excellent-plus condition with 90 percent or better original finish, including on the hammer, strong blue and vivid case colors. Excellent, sharply checkered hard rubber grips with the rampant colt at… (490-5576). Learn More »
Brass powder flask in good condition. The body has one small ding at bottom with a small seam opening. The decoration on the flask consists of a spread-winged eagle above a circle of 20 five-pointed… (160-170). Learn More »
This small brass powder flask is decorated with a stamped design of a pheasant in amongst some cattails and weeds. Decoration is present on both sides of the flask. Flask meas. approx. 3.50 inches… (160-167). Learn More »
Title is by T. Dennis Glazener and published by him in 2004. Book is soft cover and meas. approx. 8.50 x 11.00 inches and runs 76 pages. Covers are clean as is the interior. The book is profusely… (34-183). Learn More »
$40.00
ON HOLD
Small iron scissor-type mold with sprue cutter between both handles. At the end of one handle is a cork screw-like “wiper” and a flat “ramrod” on the end of the other. Measures approximately… (1146-126). Learn More »
This is very small powder flask, possibly of European manufacture and perhaps made on contract for an American retailer, intended for a pocket revolver or small single shot pistol. Measures… (490-5248). Learn More »
An original Springfield Model 1858 Cadet rifle musket in .58 caliber in nice condition. Metal surfaces appear to have been cleaned and are bright. The 38.00-inch barrel has a surface that wears a… (490-3489). Learn More »
This is very small powder flask, possibly of European manufacture and perhaps made on contract for an American retailer, intended for a pocket revolver or small single shot pistol. Measures… (490-5247). Learn More »
The first rods for Krag carbines were two-piece. The three-piece rods were introduced in 1896 and the carrying compartment in the buttstock of the rifle and carbine were accordingly altered to carry… (2022-1783). Learn More »
Title is “GUNSMITHS OF WESTERN PENNSYLVANIA VOLUME 1” by Thomas J. Metzgar and James B. Whisker. Published by Old Bedford Village Press of Bedford, Pennsylvania in 1998. Volume is hardcover and… (798-74). Learn More »
This flask is for early pocket model revolvers. Constructed with a copper body, with brass top and spout. Measures approximately 4.75” tall x 2” at widest point. Both sides are plain. Thumb tab… (490-5245). Learn More »
Iron, two cavity bullet mold for the .31 caliber revolver. It casts one round ball and one elongated bullet. There is no sprue cutter. Cavities remain clean and crisp. There are several small dings on… (490-4365). Learn More »
Iron, two cavity bullet mold for the .31 caliber revolver. It casts one round ball and one elongated bullet. There is no sprue cutter. There are several small dings on exterior where the mold needed… (490-4364). Learn More »
Brass, two cavity bullet mold for 120 gauge (approx. .31 caliber) English Adams revolver. It casts two elongated bullets. These feature a pointy nose, two grooves, and a solid base. Iron sprue cutter… (490-4378). Learn More »
Mainspring vise for the many types of early muskets that were converted to percussion ignition. Typical vise mechanism with offset bar to accommodate the older flintlock mainsprings. Excellent… (490-4363). Learn More »
Constructed with plain copper body and brass top. Funnel unscrews and spring still works. Measures approximately 4.5" tall x 1.5" wide x 1" thick. All surfaces are unadorned, with sides that have… (490-4416). Learn More »
Showing 181 to 200 out of 268
Historical Firearms Stolen From The National Civil War Museum In Harrisburg, Pa »
Theft From Gravesite Of Gen. John Reynolds »
Selection Of Unframed Prints By Don Troiani »
Fine Condition Brass Infantry Bugle Insignia »
British Imported, Confederate Used Bayonet »
Scarce New Model 1865 Sharps Still In Percussion Near Factory New »
This is a very nice CDV photograph of Charles E. Crow in Confederate uniform. It appears to be a second-generation image; photo of an existing photo. Regardless, the picture is clear with good contrast. Crow wears a Confederate 2nd lieutenant's,… (1138-988). Learn More »
May 16 - 18: N-SSA Spring Nationals, Fort Shenandoah, Winchester, VA Learn More »