site search
online catalog
Firearms
Showing 201 to 220 out of 268
BULLET MOLD FOR .45 CALIBER, COLT M1878 REVOLVER
Iron, two cavity bullet mold for the .45 caliber Colt Model 1878 revolver. It casts two elongated bullets with grooves. These are the “.45 Long Colt” bullets. Sprue cutter is attached to the top… (490-4399). Learn More »
M-1855 MAINSPRING VISE FOR CONVERSION MUSKETS
Mainspring vise for the many types of early muskets that were converted to percussion ignition. Typical vise mechanism with offset bar to accommodate the older flintlock mainsprings. Excellent… (490-4380). Learn More »
BULLET MOLD FOR .44 CALIBER, COLT ARMY OR "HOLSTER" REVOLVER
Iron, two cavity bullet mold for the .44 caliber Colt Army revolver. It casts one round ball and one elongated bullet. Sprue cutter is attached to the top and is marked "COLT'S / PATENT". Cavities… (490-4376). Learn More »
COMPARTMENTED POWDER FLASK FOR THE AMERICAN MARKET, LIKELY FOR A CASED PAIR OF PHILADELPHIA DERRINGERS
This powder flask was certainly made for the American market. The bottom is fitted with two small, round hinged covers for interior compartments, each with an eagle with raised wings, a U.S. shield on… (30-2245). Learn More »
$575.00
Originally $695.00
CIVIL WAR LEATHER HOLSTER FOR COLT ROOT OR SIMILAR POCKET REVOLVERS
The black leather of the holster is somewhat stiff but can be coaxed to take a weapon. The leather surface shows light crazing throughout. The holster has a rather wide flap with two parallel rows of… (490-3203). Learn More »
CIVIL WAR FLAP HOLSTER FOR SMALL POCKET MODEL REVOLVERS
This is a black leather holster made for revolvers. The leather still shows the faint “profile” of a revolver cylinder and barrel. A .31 caliber “pocket” model Colt fits into this holster. The… (2022-1071). Learn More »
RARE BULLET MOLD FOR .31 CALIBER "WELLS FARGO" M-1849 COLT REVOLVER
Very rare iron, two cavity bullet mold for the .31 caliber "Wells Fargo" Colt revolver. It casts one round ball and one elongated bullet. There is no sprue cutter. Marked "COLT'S / PATENT" across the… (490-4400). Learn More »
1985 STUDY ON THE KENTUCKY RIFLE BY THE KENTUCKY RIFLE ASSOCIATION
The full title of this volume is “THE KENTUCKY RIFLE; A TRUE AMERICAN HERITAGE IN PICTURE” by The Kentucky Rifle Association and published by Forte Group of Alexandria, Virginia in 1985. The… (1032-132). Learn More »
VOLUME 1 ONLY OF “AMERICAN MILITARY SHOULDER ARMS” BY MOLLER
The full title of this volume is “AMERICAN MILITARY SHOULDER ARMS – VOLUME 1: COLONIAL AND REVOLUTIONARY WAR ARMS” by George D. Moller and published by University Press of Colorado in 1993. The… (1032-131). Learn More »
LOT OF PINFIRE SHOTGUN CARTRIDGES
Offered here is a lot of nine pinfire shotgun cartridges. One is loaded, all others are unused, empty shells waiting to be filled. The one loaded shell has raised “ELEY LONDON / 12 / 1861” on the… (M23280). Learn More »
TYPE-I RICHARDS CONVERSION COLT MODEL 1860 ARMY REVOLVER
This is great early western Colt center-fire .44 caliber revolver of the 1870s in good condition. The Colt Richards conversion of the 1860 Army was produced starting in 1871 following the expiration… (490-3461). Learn More »
CONFEDERATE FLAP HOLSTER FOR REVOLVER
Hard to find, this is a non-regulation leather holster made to accommodate a large revolver such as a Colt or Remington “Army” revolver. The holster measures 12” along the front edge. Holster is… (1052-209). Learn More »
SPANISH MADE LEFAUCHEUX BY ORBEA HERMANOS
This follows the pattern generally termed the Model 1854, but there were variations. Holding six pinfire 12mm (about .47 caliber) cartridges loaded in the cylinder through a side loading gate and… (2022-2415). Learn More »
INSCRIBED MOORE REVOLVER OF CAPTAIN MICHAEL MURNANE, 169th NEW YORK
This Moore revolver rates very good for condition with little finish left on the barrel assembly, common for Moores from grabbing it there to swing out the barrel assembly and the chamber for loading,… (490-4155). Learn More »
DIXON & SON MARKED POWDER FLASK
This is a pretty powder flask with an adjustable spout and brown lacquered body impressed with a basket weave design on the faces and leaves curling up on either edge, with small brass suspension… (1184-74). Learn More »
HAWKSLEY MARKED POWDER FLASK
Good condition, plain body powder flask with prominent edge seam and adjustable spout measured in drams. Stamped “G.& J.W. HAWKSLEY / SHEFFIELD” on the top of the collar. Constructed with… (1184-71). Learn More »
DERINGER MILITARY FLINTLOCK RIFLE CONVERTED TO PERCUSSION
These rare military arms were produced by Henry Deringer of Philadelphia between 1810 -1820. Overall this weapon meas. approx. 54.00 inches long. The octagon barrel is approx. 38.00 inches long and… (911-57). Learn More »
$4,675.00
Originally $5,200.00
SELECTION OF SOCKET BAYONETS
Below is a list of the bayonets included in the above photos, from top to bottom. Please refer to the individual item#'s when asking questions or placing an order. ITEM# BAYONET… (490-). Learn More »
HINGED CLIP WITH TWO .56 CAL. BILLINGHURST & REQUA CARTRIDGES
Offered here is a rare hinged clip for the Billinghurst-Requa Battery Gun. This is a 36” long piece that was made to hold 25 cartridges at once. Its condition is good with only some light surface… (2022-2886). Learn More »
REMINGTON, MAYNARD TAPE CONVERSION OF M1816 MUSKET
This heavy, full-stock, percussion, .69 caliber, musket was originally a Model 1816 flintlock, smoothbore musket. It was altered to percussion ignition. A new Remington Arms Company Maynard-style… (490-2957). Learn More »
Showing 201 to 220 out of 268
Most Popular
Historical Firearms Stolen From The National Civil War Museum In Harrisburg, Pa »
Theft From Gravesite Of Gen. John Reynolds »
Selection Of Unframed Prints By Don Troiani »
Fine Condition Brass Infantry Bugle Insignia »
British Imported, Confederate Used Bayonet »
Scarce New Model 1865 Sharps Still In Percussion Near Factory New »
featured item
CIVIL WAR MUSICIAN’S GROUPING INCLUDING WARTIME IDENTIFICATION DISK, IDENTIFICATION SHIELD, AND FREEMANTLE ROTARY VALVE CORNET/VALVED BUGLE: JOHN J. WEAVER- 10th and 56th PA- AND CUTLER’S BRIGADE BAND 1861-1865
This wonderful grouping includes two wartime identification badges, a rotary valve cornet dating about 1864, along with his GAR membership badge and veteran’s id badge. To top it off, in addition to prior service in the 10th PA from April 26 to… (1179-420). Learn More »
site search
Upcoming Events
May 16 - 18: N-SSA Spring Nationals, Fort Shenandoah, Winchester, VA Learn More »
