Swords

Showing 41 to 60 out of 98


UNCOMMON M1860 CAVALRY SABER BY MILLARD – DATED 1862

UNCOMMON M1860 CAVALRY SABER BY MILLARD – DATED 1862

Produced under the smallest government contract for sabers (10,000) by the D. J. Millard Company’s manufacturing center in Clayville, New York, this early production weapon is a M1860 Light Cavalry… (1304-14). Learn More »

M1840 ARTILLERY SABRE BY ROBY WITH SCABBARD, BELT, AND ALLEGHENY ARSENAL PLATE

M1840 ARTILLERY SABRE BY ROBY WITH SCABBARD, BELT, AND ALLEGHENY ARSENAL PLATE

This saber is an early, seldom seen ‘C. Roby’ enlisted Model 1840 light artillery edged weapon termed a Type-1. Blade exhibits the single, rare one-line maker address “C. ROBY & CO” but no… (707-04). Learn More »

INSCRIBED PRESENTATION SWORD OF COLONEL, LATER GENERAL JAMES H. LANE: THREE TIMES WOUNDED; SERVED FROM BIG BETHEL TO APPOMATTOX, INCLUDING PICKETT’S CHARGE

INSCRIBED PRESENTATION SWORD OF COLONEL, LATER GENERAL JAMES H. LANE: THREE TIMES WOUNDED; SERVED FROM BIG BETHEL TO APPOMATTOX, INCLUDING PICKETT’S CHARGE

WHEN ELECTED COLONEL OF THE 28th NC, HIS OLD REGIMENT, THE 1st NC, “PRESENTED HIM WITH A SWORD, SADDLE AND BRIDLE, AND A HANDSOME PAIR OF GOBLETS…” We are proud to offer the sword mentioned in… (846-572). Learn More »

$59,500.00
Originally $69,500.00

1850’S AMES MILTIA OFFICER’S SWORD KNIGHTS HEAD AND MAMELUKE STYLE CROSS GUARD

1850’S AMES MILTIA OFFICER’S SWORD KNIGHTS HEAD AND MAMELUKE STYLE CROSS GUARD

This is a high-quality Ames militia staff sword with knight’s helmet pommel, mameluke style cross guard, and an engraved brass scabbard. This is a pre-Civil War sword produced circa 1850 by the Ames… (2025-673). Learn More »

A FINE SAXON MODEL 1873 ARTILLERY SABER

A FINE SAXON MODEL 1873 ARTILLERY SABER

The 29 1/2-inch blade is marked on the ricasso: "WEYERSBURG KIRSCHBAUM & Cie SOLINGEN" while on the spine is a small crown over "RC". The blade has some scuffing but is otherwise in excellent… (2025-664). Learn More »

IDENTIFIED HORSTMANN CAVALRY OFFICER’S SABER CARRIED BY GEORGE BRECK, NEW YORK LIGHT ARTILLERY

IDENTIFIED HORSTMANN CAVALRY OFFICER’S SABER CARRIED BY GEORGE BRECK, NEW YORK LIGHT ARTILLERY

Cavalry officer’s sabers carried by officers in the light artillery are not uncommon, particularly in volunteer units where regulations might be more loosely applied, and a cavalry officer’s… (490-5267). Learn More »

CLASSIC CONFEDERATE ENLISTED CAVALRY SABER WITH WOOD SCABBARD BY KRAFT, GOLDSCHMIDT AND KRAFT OR HAMMOND MARSHALL

CLASSIC CONFEDERATE ENLISTED CAVALRY SABER WITH WOOD SCABBARD BY KRAFT, GOLDSCHMIDT AND KRAFT OR HAMMOND MARSHALL

This is a very strong example of the classic Confederate cavalry saber with wood scabbard identified by Albaugh in 1963 as a product of Kraft, Goldschmidt and Kraft of Columbia, SC. Some collectors… (1268-353). Learn More »

COURTNEY & TENNENT MARKED CONFEDERATE NAVAL CUTLASS BY MOLE WITH SCABBARD

COURTNEY & TENNENT MARKED CONFEDERATE NAVAL CUTLASS BY MOLE WITH SCABBARD

Offered here is a very good example of a 25” long Robert Mole & Sons produced Confederate Naval Cutlass, marked by Courtney, Tennent & Company with its original scabbard. The blade is… (1268-683). Learn More »

HANDSOME INSCRIBED MODEL 1850 STAFF AND FIELD OFFICER'S SWORD IN EXCELLENT CONDITION - ALBERT G. NEWSON, 193RD NEW YORK INFANTRY

HANDSOME INSCRIBED MODEL 1850 STAFF AND FIELD OFFICER'S SWORD IN EXCELLENT CONDITION - ALBERT G. NEWSON, 193RD NEW YORK INFANTRY

Here is a very handsome and inscribed, original Model 1850 Officer's Staff and Field imported sword complete with its original metal scabbard. On the scabbard mount of this Civil War edged weapon is a… (490-06). Learn More »

$2,400.00
Originally $2,800.00

CASED PRESENTATION SWORD OF LT. ASAPH O. DODGE, 16th NEW YORK, WITH BATTLE HONORS

CASED PRESENTATION SWORD OF LT. ASAPH O. DODGE, 16th NEW YORK, WITH BATTLE HONORS

This officer’s sword not only bears a presentation inscription on the upper scabbard mount and battle honors on the middle mount, it comes with its original gold bullion officer’s sword knot and… (1052-1134). Learn More »

MODEL 1872 UNITED STATES MARINE CORPS OFFICER’S MAMALUKE SWORD

MODEL 1872 UNITED STATES MARINE CORPS OFFICER’S MAMALUKE SWORD

The drawn sword meas. approx. 35.00 inches long. The plated blade itself meas. approx. 29.75 inches long x 0.75 of an inch wide at the ricasso. It has a central fuller that starts just above the… (150-354). Learn More »

$2,400.00
Originally $3,150.00

M1860 CAVALRY SABER WITH SCABBARD, GUTTA PURCHA GRIP, PUBLISHED IN TILLMAN’S BOOK

M1860 CAVALRY SABER WITH SCABBARD, GUTTA PURCHA GRIP, PUBLISHED IN TILLMAN’S BOOK

Classic Civil War cavalry saber believed to be made by Gilbert Dubois in Napanoch, New York. Sword is in overall very good condition. Blade exhibits gray tone overall with a few darker patches. No… (870-470). Learn More »

EXCAVATED CONFEDERATE CAVALRY SABER

EXCAVATED CONFEDERATE CAVALRY SABER

If they gave out awards for crudely made cavalry sabers, this one would be in the running. The guard is simple flat iron, curving in a broad semicircle, with a simple hole in one end through which the… (490-6746). Learn More »

INDONESIAN – JAVANESE  KRIS OR KERIS

INDONESIAN – JAVANESE KRIS OR KERIS

A Javanese Kris showing a wider blade with fewer curves than some, gray in color, but showing very clearly an attractive watery pattern to the steel. The blade is deeply worked across the broad base.… (490-6917). Learn More »

US 1832 PATTERN 1844 DATED ARTILLERY SHORT SWORD AND DINGEE MARKED BELT

US 1832 PATTERN 1844 DATED ARTILLERY SHORT SWORD AND DINGEE MARKED BELT

The 1832 short sword had been specified for infantry sergeants and musicians as well as enlisted men of foot artillery. With the distribution of the 1840 sword patterns the sergeants and musicians… (2024-1766). Learn More »

NEAR MINT SILVER PLATED AND GILT-ETCHED EAGLE-POMMEL PRESENTATION 1902 OFFICER’S SWORD OF MAJ. ALFRED B. WELCH, 9th U.S. FIELD ARTILLERY

NEAR MINT SILVER PLATED AND GILT-ETCHED EAGLE-POMMEL PRESENTATION 1902 OFFICER’S SWORD OF MAJ. ALFRED B. WELCH, 9th U.S. FIELD ARTILLERY

This is a beautiful high-end example of the U.S. 1902 officer’s saber made by Eickorn of Solingen in excellent to near mint condition. The hilt and guard are steel, as mandated in December 1902, but… (2024-2063). Learn More »

EXCAVATED CIVIL WAR US MODEL 1840 MUSICIAN’S SWORD

EXCAVATED CIVIL WAR US MODEL 1840 MUSICIAN’S SWORD

This pattern of sword for wear by musicians was part of the 1840 series of arms that included new patterns of cavalry saber, officer’s sword, non-commissioned officer’s sword, etc. This is similar… (490-6745). Learn More »

US ORDNANCE INSPECTED MODEL 1832/34 OFFICER’S SWORD

US ORDNANCE INSPECTED MODEL 1832/34 OFFICER’S SWORD

This is a very scarce US Model 1832/34 sword for officers of infantry, artillery and ordnance made by Ames on contract with the U.S. government for officers of the regular army and inspected by Major… (870-318). Learn More »

MEDAL OF HONOR FOR “EXTRAORDINARY HEROISM” – 1861 PRESENTATION SWORD OF LT. CHARLES JOSEPH MURPHY, 38th NEW YORK, MEDAL OF HONOR FOR BULL RUN, ESCAPEE FROM LIBBY, VOLUNTEER AIDE TO MEDICAL STAFF IN THE PENINSULA CAMPAIGN

MEDAL OF HONOR FOR “EXTRAORDINARY HEROISM” – 1861 PRESENTATION SWORD OF LT. CHARLES JOSEPH MURPHY, 38th NEW YORK, MEDAL OF HONOR FOR BULL RUN, ESCAPEE FROM LIBBY, VOLUNTEER AIDE TO MEDICAL STAFF IN THE PENINSULA CAMPAIGN

This non-regulation officer’s sword bears an 1861 presentation on the obverse scabbard,  “Presented to/ Lieut. C.J. Murphy, / by his friends / 1861” and a list of battles on the reverse… (1052-1131). Learn More »

INSCRIBED M1850 FOOT OFFICER’S SWORD OF ROBERT L. ORR, 61st PENNSYLVANIA, MEDAL OF HONOR FOR PETERSBURG

INSCRIBED M1850 FOOT OFFICER’S SWORD OF ROBERT L. ORR, 61st PENNSYLVANIA, MEDAL OF HONOR FOR PETERSBURG

This Klingenthal made US Model 1850 foot officer’s sword bears a dead-real period inscription on the reverse of the scabbard throat reading: Robt. L. Orr / Independent / Greys. Orr had been active… (1052-1127). Learn More »


Showing 41 to 60 out of 98