BURNSIDE 5TH MODEL CARBINE, CONFEDERATE “CLEANED & REPAIRED”

$3,250.00

Quantity Available: 1

Item Code: 362-1163

Shipping: Determined by Method & Location of buyer

To Order:
Call 717-334-0347,
Fax 717-334-5016, or E-mail

This is the Burnside single shot percussion carbine, Model 1864, aka "5th model". It is a .54 caliber carbine manufactured by the Burnside Rifle Co., in Providence, Rhode Island. General Ambrose Burnside, was an official in the company before the war but was not involved in wartime development of the weapon. Approximately 43,000 carbines of this model were produced, serial numbers were reset to zero and run to around 43,000 overall. This model represented only modest improvements over the earlier models, most notably being the placement of a guide screw on the right side in the middle of the receiver, this improvement facilitated smoother operation during loading.

Standard features include an iron buttplate, single iron barrel band with band spring, double iron trigger guard/loading lever, hinged leaf-sight, single sling swivel on underside, and a chamber tapered for unique Burnside metal cartridge. The saddle ring and bar on left side have been removed.

The maker’s marks typically found on top of frame, “BURNSIDE’S PATENT / MODEL OF 1864” are all but gone. A worn “CAST STEEL 1864” is on the top of the barrel. Serial number 33270 appears on the top of the barrel breech and on the top of the receiver. Barrel length is 20 inches. All gun metal is mostly a dark brown color with scattered patches of brighter highlights. Bore is clean with scattered light pitting and good rifling. Hammer does not hold a half, or full cock.

The two sections of the wood stock exhibit different tones. The fore stock has good original color and finish. The shoulder stock has been lightly sanded and features a much lighter tone. Two light cartouches are visible on the left side and a “Z” inspection stamp is found on the underside of the stock between the rear swivel and the trigger guard tang.

This mark signifies that this weapon was recovered and turned in to the Confederate Ordnance Bureau for at least cleaning, and/or for some type of repair. The “Z” is believed to stand for Louis Zimmer who oversaw repair work at Richmond. See Steve Knott’s “Captured & Collected” book for the complete Confederate “captured, repaired, and reissued” weapons story.  [jet] [ph:L]

DISCLAIMER: All firearms are sold as collector's items only - we do not accept responsibility as to the shooting safety or reliability of any antique firearm. All firearms are described as accurately as possible, given the restraints of a catalog listing length. We want satisfied customers & often "under" describe the weapons. Any city or state regulations regarding owning antique firearms are the responsibility of the purchaser. All firearms are "mechanically perfect" unless noted, but again, are NOT warranted as safe to fire!

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

THIS ITEM, AS WITH ALL OTHER ITEMS AVAILABLE ON OUR WEB SITE,

MAY BE PURCHASED THROUGH OUR LAYAWAY PROGRAM.

CLICK HERE FOR OUR POLICIES AND TERMS.

THANK YOU!

Inquire »

Inquire About BURNSIDE 5TH MODEL CARBINE, CONFEDERATE “CLEANED & REPAIRED”

For inquiries, please email us at [email protected]

featured item

RARE IDENTIFIED 65th NY SERGEANT’S JACKET, WITH MANSCRIPT MATERIAL: 1st U.S. CHASSEURS

This is an extremely rare, early-war uniform jacket, with related material, belonging to a sergeant of the 65th New York, who enlisted at the beginning of the war as the regiment’s commissary sergeant, and gained a lieutenant’s commission in a… (1179-233). Learn More »

Upcoming Events

29
Apr

May 15 - 19: NSS-A Spring Nationals Learn More »

Instagram