Relics

Showing 271 to 280 out of 338


DUG PATTERN 1826 EAGLE BREAST PLATE WITH BAYONET MARKS

DUG PATTERN 1826 EAGLE BREAST PLATE WITH BAYONET MARKS

Face has a dark patina throughout with small light patches of discoloration. Detail to the eagle is good. Reverse has 100% of the lead fill with a nice smooth finish. Only one of the hooks are… (595-1903). Learn More »

EXCAVATED CIVIL WAR ID DISK – BATTLE HONORS BUT NO NAME

EXCAVATED CIVIL WAR ID DISK – BATTLE HONORS BUT NO NAME

Pewter “WAR OF 1861” style identification disk. In “dug” condition showing expected small chipping and edge wear. Much of the plating remains on the front and back faces. The side that would… (2022-2442). Learn More »

SKIN ONLY OF A US PATTERN 1826 EAGLE BREAST PLATE

SKIN ONLY OF A US PATTERN 1826 EAGLE BREAST PLATE

Skin is in good condition with no cracks or missing material. Nice patina to the face and good detail to the eagle. One edge is slightly pushed causing the plate to be out of round a bit. Reverse has… (1184-97). Learn More »

DUG PATTERN 1826 EAGLE BREAST PLATE

DUG PATTERN 1826 EAGLE BREAST PLATE

Face is in nice condition and free of cracks and chips. Detail to the eagle is good however some of it is subdued due to the contrasting light and dark surface patina. Reverse has 100% of the lead and… (565-1902). Learn More »

RELIC MODEL 1816 SOCKET BAYONET - POSSIBLE CS

RELIC MODEL 1816 SOCKET BAYONET - POSSIBLE CS

Bayonet is complete with a full-length triangular blade and socket with mortise. All is encrusted with a thin layer of rust. No markings are visible. Half-way down the length of one of the blades… (490-3272). Learn More »

RARE “DUG” RELOADABLE IRON CHAMBER FOR AGAR/UNION REPEATING GUN

RARE “DUG” RELOADABLE IRON CHAMBER FOR AGAR/UNION REPEATING GUN

Offered here is an iron tube that was used in the .58 caliber, Union Repeating Gun (aka Coffee Mill gun, Agar).  Paper cartridges were loaded into these reusable iron chambers.  The chamber features… (2022-2815). Learn More »

RARE 90-BORE (~.36 CALIBER) BULLET FOR CHRISTIAN SHARPS PISTOL

RARE 90-BORE (~.36 CALIBER) BULLET FOR CHRISTIAN SHARPS PISTOL

This is the scarce bullet for the Christian Sharps pistols manufactured between 1857-1858.  Solid bullet, raised bands, tie ring, nipped sprue on base.  This pattern of bullet, with extended ring,… (2022-2612B). Learn More »

RARE 90-BORE (~.36 CALIBER) BULLET FOR CHRISTIAN SHARPS PISTOL

RARE 90-BORE (~.36 CALIBER) BULLET FOR CHRISTIAN SHARPS PISTOL

This is the scarce bullet for the Christian Sharps pistols manufactured between 1857-1858.  Solid bullet, raised bands, tie ring, nipped sprue on base.  This pattern of bullet, with extended ring,… (2022-2612A). Learn More »

CONFEDERATE .36 CALIBER COLT REVOLVER BULLET – 3RD PATTERN, RICHMOND LABORATORY

CONFEDERATE .36 CALIBER COLT REVOLVER BULLET – 3RD PATTERN, RICHMOND LABORATORY

.36 caliber bullet for Colt and other “Navy” revolvers. This is the later-war, enlarged, 3rd pattern bullet made at the Richmond Laboratory. This bullet has a more-bulbous nose, solid base and one… (2022-2506). Learn More »

MAINE “VMM” CARTRIDGE BOX PLATE FROM ORANGE, VIRGINIA

MAINE “VMM” CARTRIDGE BOX PLATE FROM ORANGE, VIRGINIA

These plates, measuring 56 X 87mm, followed the standard U.S. 1839 version, but with VMM stamped in the rolled brass indicating Volunteer Militia of Maine. These were paired on equipment with the… (1184-148). Learn More »


Showing 271 to 280 out of 338

featured item

AN IDENTIFIED GETTYSBURG PICKED-UP RICHMOND RIFLE-MUSKET

This is very good example of a Richmond rifle-musket that was made in 1863. It has the beveled "low-hump" lock plate introduced in the spring of 1862. It has the desirable brass butt plate and nose cap; the iron barrel bands are all Richmond made… (1268-076). Learn More »

Upcoming Events

15
Dec
Instagram