Cartridges & Gun Tools

Showing 61 to 80 out of 96


.50 CALIBER MAYNARD CARTRIDGES

.50 CALIBER MAYNARD CARTRIDGES

Priced to Sell – These are non-excavated cartridges for the .50 caliber Maynard carbine.  Lead bullet with flat nose and a single groove in a brass case with large disc soldered to the bottom. A… (490-768). Learn More »

.45 CALIBER IRON PISTOL BALL MOLD & BARREL TOOL

.45 CALIBER IRON PISTOL BALL MOLD & BARREL TOOL

Iron scissor-type mold to cast a lead round ball for revolvers.  Measures approximately 3.5” long overall. Single cavity mold with spout. Sprue cutter is formed between the two handles. Cavity… (1164-46). Learn More »

PAPER WRAPPED PACK OF PERCUSSION CAPS

PAPER WRAPPED PACK OF PERCUSSION CAPS

Typical Civil War-era package of percussion caps.  Wrapped in tan cartridge paper, tied with string at top and folded closed at bottom.  Measures approximately 2 ½” long. One of these was… (172-4576). Learn More »

OPEN PACKAGE FOR .44 CALIBER CARTRIDGES FOR “REVOLVING HOLSTER PISTOL” WITH BULLETS

OPEN PACKAGE FOR .44 CALIBER CARTRIDGES FOR “REVOLVING HOLSTER PISTOL” WITH BULLETS

An open package for .44 caliber paper cartridges in good condition with five of the original bullets inside. “Expressly For Colt’s Patent Revolving Holster Pistol.” This is the pasteboard box… (286-1019). Learn More »

VERY LARGE POWDER FLASK BY J. DIXON & SONS, SHEFFIELD

VERY LARGE POWDER FLASK BY J. DIXON & SONS, SHEFFIELD

This very large flask has to have been for shotguns. Constructed with a copper body, with brass top and spout. Measures approximately 11” tall x 5” at widest point. Unadorned body. Thumb tab and… (172-5639). Learn More »

POWDER FLASK FOR REVOLVERS

POWDER FLASK FOR REVOLVERS

This flask is for early pocket model revolvers. Constructed with a copper body, with brass top and spout. Measures approximately 6” tall x 2.75” at widest point. Both sides are plain. Thumb tab… (172-5638). Learn More »

BANNERMAN’S WALL PLAQUE WITH FLINT AND PICK & BRUSH

BANNERMAN’S WALL PLAQUE WITH FLINT AND PICK & BRUSH

This is a wood plaque displaying flintlock musket accessories and made to hang on a wall. The folks at Francis Bannerman’s & Sons created wall plaques with various items attached as another way… (172-5626). Learn More »

“EAGLE” POWDER FLASK FOR REVOLVERS

“EAGLE” POWDER FLASK FOR REVOLVERS

This small flask is for baby dragoon or early pocket model revolvers. Constructed with a copper body and brass top and spout. Measures approximately 4.5” tall x 2” at widest point. Both sides… (1110-63). Learn More »

ARTILLERY VENT PUNCH FOR 10-INCH GUN – WATERVLIET ARSENAL

ARTILLERY VENT PUNCH FOR 10-INCH GUN – WATERVLIET ARSENAL

This is a tool for clearing the vent of any obstructions. It has an octagonal head with a hole in the center, and a 17” wire brazed to it. The wire comes to a point at the end. The flat head is… (1117-46). Learn More »

.577 CALIBER ENGLISH ENFIELD PATTERN CARTRIDGE

.577 CALIBER ENGLISH ENFIELD PATTERN CARTRIDGE

Fabricated by Ludlow Brothers of Birmingham, England. Nice display in a 8.25” x 12.25” Riker case. Photocopy of an original wrapper at top with info sheet below, and then the cartridge at the… (M24055). Learn More »

RELIC M1873 MAYNARD BULLET MOLD

RELIC M1873 MAYNARD BULLET MOLD

Iron bullet mold measures approximately 7 ½” long. Two halves pinned with rivet and has floating sprue cutter. Iron is pitted but not badly; could be “dug” or out of a barn. Still opens and… (1117-238). Learn More »

WIPER FOR FOREIGN MUSKET

WIPER FOR FOREIGN MUSKET

This wiper was probably for some foreign musket.  Wipers were screwed to ramrods to hold a patch or wad of tow to clean the gun barrel.  This pattern is unusual as it has a male threaded end like… (362-925). Learn More »

BRASS BULLET MOLD FOR “PICKET” TYPE BULLET

BRASS BULLET MOLD FOR “PICKET” TYPE BULLET

Scissor-type mold made of brass. Casts a .44 caliber “picket” or “sugarloaf” style of bullet with rounded base. Measures 6 ½” overall. Brass has a blotchy, dark patina. … (1117-234). Learn More »

ENGLISH PERCUSSION CAP PACK

ENGLISH PERCUSSION CAP PACK

This is a “pulp bag” of percussion caps as manufactured at the Royal Laboratory at Woolwich, England. Each pack was to contain 15 copper percussion caps.  Packages are full of caps and twisted… (M25673). Learn More »

VERY NICE PEACOCK POWDER FLASK ASSOCIATED WITH COLT ROOT REVOLVERS

VERY NICE PEACOCK POWDER FLASK ASSOCIATED WITH COLT ROOT REVOLVERS

This flask is French made and often found cased with Colt 1855 New Model Root Revolvers, likely being purchased from the maker by one of Colt’s larger dealers for use in his cased Colts. (See… (30-2209). Learn More »

EXCAVATED BOYLE, GAMBLE AND MCFEE BAYONET ADAPTER, 1ST MODEL

EXCAVATED BOYLE, GAMBLE AND MCFEE BAYONET ADAPTER, 1ST MODEL

Recovered in central Virginia. Bayonet adapters enabled rifles such as the Model 1817 and Model 1841, as well as Southern-made military rifles, to be mounted with bayonets without weakening barrels by… (1000-2326). Learn More »

FULL PACK OF .50 CALIBER GALLAGER CARTRIDGES – POULTNEY PATENT

FULL PACK OF .50 CALIBER GALLAGER CARTRIDGES – POULTNEY PATENT

A nice, solid pack containing ten .50 caliber cartridge for the Gallager carbine. These are the paper and brass foil cartridges. Made under Thomas Poultney’s patent of 1863. Label has two areas of… (172-5444). Learn More »

BOX FOR 50 REMINGTON CARBINE CARTRIDGES – CRITTENDEN & TIBBALS

BOX FOR 50 REMINGTON CARBINE CARTRIDGES – CRITTENDEN & TIBBALS

Pasteboard box covered with a marbled wrap and green label and tape. Box held fifty “No. 46” rimfire cartridges. Box only no cartridges remain. Green label on top shows wear but remains in good… (172-5462). Learn More »

RARE PRE-CIVIL WAR GREENSBORO ALABAMA BUCKSHOT MOLD

RARE PRE-CIVIL WAR GREENSBORO ALABAMA BUCKSHOT MOLD

Two piece brass mold that meas. approx. 7.25 inches long by 1.00 inch wide. The mold opens on an upper hinge which can very easily separate if desired. A look at the inside shows that the mold is… (30-1849). Learn More »

$1,795.00
Originally $2,250.00

CONFEDERATE RICHMOND RIFLE MUSKET COMBINATION TOOL

CONFEDERATE RICHMOND RIFLE MUSKET COMBINATION TOOL

These cleverly designed, forged iron musket tools were fabricated at Richmond. See Davies, “CS Armory Richmond,” for photographs of several examples. They combine a double-ended screwdriver blade… (1000-1194). Learn More »


Showing 61 to 80 out of 96

featured item

CLASSIC CONFEDERATE ENLISTED CAVALRY SABER AND WOOD SCABBARD BY HAMMOND MARSHALL OR KRAFT, GOLDSCHMIDT AND KRAFT

This is a very good, complete, classically Confederate cavalry saber with wood scabbard. Other known examples include one in the Wray Collection at the Atlanta History Center. Some collectors still refer to it as a product of Hammond Marshall and… (172-5794). Learn More »

Upcoming Events

18
Aug
Instagram