site search
online catalog
Edged Weapons
Showing 101 to 150 out of 170
EXCAVATED CONFEDERATE CAVALRY SABER
If they gave out awards for crudely made cavalry sabers, this one would be in the running. The guard is simple flat iron, curving in a broad semicircle, with a simple hole in one end through which the… (490-6746). Learn More »
INDONESIAN – JAVANESE KRIS OR KERIS
A Javanese Kris showing a wider blade with fewer curves than some, gray in color, but showing very clearly an attractive watery pattern to the steel. The blade is deeply worked across the broad base.… (490-6917). Learn More »
PLYMOUTH NAVY RIFLE BAYONET WITH SCABBARD
This Plymouth “Navy” Rifle bayonet has a partially bright blade with a light patina and minor localized pitting typical for the age and intended environments of use for such a piece. The… (490-7070). Learn More »
PLYMOUTH NAVY RIFLE BAYONET WITH SCABBARD
This Plymouth “Navy” Rifle bayonet has a partially bright blade with a light patina and minor localized pitting typical for the age and intended environments of use for such a piece. The… (2024-1696). Learn More »
US 1832 PATTERN 1844 DATED ARTILLERY SHORT SWORD AND DINGEE MARKED BELT
The 1832 short sword had been specified for infantry sergeants and musicians as well as enlisted men of foot artillery. With the distribution of the 1840 sword patterns the sergeants and musicians… (2024-1766). Learn More »
SPEARHEAD FROM A BROKEN LANCE
This is the spearhead section only from a broken lance. The piece meas. approx. 38.50 inches long overall. The iron point of the spearhead itself is double edged with a raised ridge on each side… (490-3235). Learn More »
EARLY CIVIL WAR US BAYONET SCABBARD
US regulation scabbard for the socket bayonet used on the Model 1855 .58 Cal. Rifle Musket, and later patterns like the M1861, etc. This is in good condition, showing issue and use, with some… (172-6059). Learn More »
RARE LEATHER BAYONET SCABBARD FOR M1865 JOSLYN RIFLE
This is one of the rarer variants of the standard US Model 1855-type socket bayonet that was produced near the end of the Civil War. The bayonet was manufactured for use with the US Model 1865 Joslyn… (2024-1874). Learn More »
EXCAVATED CIVIL WAR US MODEL 1840 MUSICIAN’S SWORD
This pattern of sword for wear by musicians was part of the 1840 series of arms that included new patterns of cavalry saber, officer’s sword, non-commissioned officer’s sword, etc. This is similar… (490-6745). Learn More »
MODEL 1851 CADET RIFLE SOCKET BAYONET
VF condition with nice, smooth metal with even gray patina. Blade measures 14.5”, socket 2 5/8”. Blade with nice “US” stamping. Scarce bayonet. … (490-7078). Learn More »
BUNDESWEHR MI219 KNIFE WITH SCABBARD
An excellent condition army trench or general purpose knife, with contoured, unmarred, wood grip fastened with three rivets, and scored with eight slanting grooves on each side for a more secure… (490-6780). Learn More »
US ORDNANCE INSPECTED MODEL 1832/34 OFFICER’S SWORD
This is a very scarce US Model 1832/34 sword for officers of infantry, artillery and ordnance made by Ames on contract with the U.S. government for officers of the regular army and inspected by Major… (870-318). Learn More »
HARPERS FERRY M1819 SOCKET BAYONET FOR HALL RIFLE
This is a U.S. Model 1819 Socket Bayonet for the Hall Rifle as manufactured at Harpers Ferry. The US M1816/22/27 series of bayonets feature a 16” blade, face flute of varying lengths, a T-shaped… (490-6893). Learn More »
VERY NICE E.M DICKENSON SHEFFIELD “INVICTA” BOWIE KNIFE AND SCABBARD
An excellent condition hunting Bowie with staghorn grips and clip-point blade. The grips are excellent, with nice cream and brown color and good surface with no cracks, chips or damage, oval guard,… (2-668). Learn More »
MEDAL OF HONOR FOR “EXTRAORDINARY HEROISM” – 1861 PRESENTATION SWORD OF LT. CHARLES JOSEPH MURPHY, 38th NEW YORK, MEDAL OF HONOR FOR BULL RUN, ESCAPEE FROM LIBBY, VOLUNTEER AIDE TO MEDICAL STAFF IN THE PENINSULA CAMPAIGN
This non-regulation officer’s sword bears an 1861 presentation on the obverse scabbard, “Presented to/ Lieut. C.J. Murphy, / by his friends / 1861” and a list of battles on the reverse… (1052-1131). Learn More »
INSCRIBED M1850 FOOT OFFICER’S SWORD OF ROBERT L. ORR, 61st PENNSYLVANIA, MEDAL OF HONOR FOR PETERSBURG
This Klingenthal made US Model 1850 foot officer’s sword bears a dead-real period inscription on the reverse of the scabbard throat reading: Robt. L. Orr / Independent / Greys. Orr had been active… (1052-1127). Learn More »
BEAUTIFUL GERMAN HUNTING SWORD
This German hunting sword has lots of gilt finish left on the brass mounts of the hilt and a very clean blade showing deeply etched floral and animal motifs, along with a poem, with etching showing… (2024-273). Learn More »
RARE SOCKET BAYONET FOR THE “DRAKE-ALTERATION” THE M1841 MISSISSIPPI RIFLE
The State of Massachusetts contracted with the firm of A.J. Drake of Boston to alter 1,742 Model 1841 Mississippi Rifles that were in state stores. The guns were unaltered in caliber (retaining… (490-6787). Learn More »
INSCRIBED AND DATED CIVIL WAR CUTLERY HANDLE BOWIE WITH SCABBARD
This elegant, cutlery handle Bowie has a double-edged spearpoint blade with median ridge and long pointed ricasso. On one side the ricasso is stamped “H. C. BOOTH & CO / SILVER STEEL /… (450-215). Learn More »
PRESENTATION AMES M1850 FOOT OFFICER’S SWORD WITH SCARCE ENGRAVED GILT BRASS FACTORY SCABBARD - CAPT. N. H. KEMP, 6TH & 1ST MASSACHUSETTS MILITIA
This Model 1850 foot officer’s is nicely etched by Ames on the blade ricasso and also stamped by the company on the reverse of the gilt brass scabbard near the throat showing the scabbard was not… (870-645). Learn More »
CAMP AX OF ALBERT H. HILL - 4th RHODE ISLAND, 7th RHODE ISLAND, DETACHED SERVICE WITH BATTERY A 1st PA ARTILLERY
Camp axes were privately purchased by soldiers for common chores like chopping firewood when in winter camps or even barracks. This one nicely carved on the handle by the soldier with his name, likely… (1179-710). Learn More »
HIGH GRADE Ca. 1850-1860 GENERAL’S SWORD WITH UNUSUAL USA BLADE ETCHING BY LAMBERT, PHILADELPHIA, EX-KEVIN HOFFMAN
This sword comes from the extensive and esteemed collection of Kevin Hoffman, who classified it as a ca. 1850-1860 general officer’s sword. In support of that identification the sword still retains… (870-672). Learn More »
SHARPS & HANKINS SABER BAYONET - NO SCABBARD
Overall, the bayonet meas. approx. 25.25 inches long from point to pommel. The blade itself is 19.50 inches long with a semi-bright surface with light scattered mottling and minor pitting in the point… (169-602). Learn More »
EXCELLENT CONDITION U.S. MODEL 1840 MEDICAL STAFF OFFICER'S SWORD
Offered here is a scarce and superb Model 1840 Medical Staff sword by N.P. Ames. The sword and scabbard measure approximately 37.5” overall. Blade is 30” long. Blade surface remains bright with… (362-1118). Learn More »
AUSTRIAN MODEL 1867 WERNDL BAYONET WITH SCABBARD
The drawn bayonet meas. approx. 28.25 inches long from point to pommel. The bright blade meas. 23.00 inches with a 15.00 inch unstopped central fuller. One side of the ricasso bears the Austrian crest… (490-4163). Learn More »
MEXICAN WAR INSCRIBED U.S. MODEL 1840 FOOT OFFICER’S SWORD
Introduced into the army in 1841, these swords follow the general lines of the 1834 pattern in using a “cut-and-thrust” blade with a double-clamshell guard, but employ a spearpoint blade with… (160-182). Learn More »
NEAR MINT US JOSLYN MODEL 1855 NAVY SABRE BAYONET – NO SCABBARD
The blade meas. approx. 22.00 inches long with a 14.00 inch unstopped central fuller. The blade’s surface is clean and bright with some minor mottling near the point and light hard to see oxidation.… (218-600). Learn More »
US MODEL 1816 SOCKET BAYONET – SOUTH CAROLINA
Bayonet is in good overall condition. The surface has scattered light pitting with a brown patina. Measures approximately 19” long overall with 3” socket. Top fuller is 9” long. Small, and… (490-3271). Learn More »
RARE M1840 U.S. ARTILLERY OFFICER’S SABER MADE BY AMES BUT ETCHED AND RETAILED BY SCHUYLER, HARTLEY AND GRAHAM: THE ONE IN THE BOOK!
This is an extremely rare M1840 U.S. artillery officer’s saber made by Ames but etched and retailed by Schuyler, Hartley and Graham. Thillmann knew only of this one example, and until it was found… (870-637). Learn More »
$10,500.00
Originally $13,950.00
NON-REGULATION SILVER GRIPPED PRESENTATION SWORD BY SCHUYLER, HARTLEY & GRAHAM - LT. JAMES MOFFAT, 16TH NEW YORK CAVALRY
This presentation sword has very impressive deeply cast and chased mounts and silver gripped hilt. Schuyler, Hartley and Graham assembled and sold a wide variety of swords that were often highly… (870-653). Learn More »
$5,750.00
Originally $7,650.00
BRITISH 1796 LIGHT CAVALRY SABER MADE FOR THE AMERICAN MARKET
This steel-hilted saber is modeled on the British 1796 light cavalry saber and the style was very popular in American mounted units from before the War of 1812 right into the 1840s. This has a very… (870-624). Learn More »
$2,395.00
Originally $3,150.00
CIVIL WAR MODEL 1855 “COLLINS & CO” SOCKET BAYONET
This accouterment is an original Civil War socket bayonet made by the Collins & Company of Collinsville, CT. The total length of the bayonet is 21” long while the blade itself is approximately… (169-593). Learn More »
M1832 FOOT ARTILLERY SWORD WITH SCABBARD, WITH MEYERSBERG SYMBOL ON BLADE
Manufactured: Solingen Maker: Weyersberg / Horstmann Year: Sword undated, scabbard 1861 Model: 1832 Size: 19.25 inch blade The W. H. Horstmann company had a strong association with the Gebruder… (870-466). Learn More »
$1,350.00
Originally $1,800.00
ON HOLD
REMINGTON ALTERATION SABER BAYONET FOR THE US MODEL 1841 RIFLE – MADE BY COLLINS & COMPANY
Overall length of the bayonet is 24.50 inches. The blade itself is 19.50 inches long with a central fuller that meas. approx. 15.25 inches. The true edge is free of nicks while the blade surface has a… (169-589). Learn More »
EXCELLENT U.S. MODEL 1840 LIGHT ARTILLERY OFFICER’S SABER WITH MINTY ETCHED BLADE
This pattern was introduced in 1840 for all mounted officers other than cavalry, but with the introduction of the 1850 patterns it was limited to officers of light artillery, making it very scarce. On… (870-635). Learn More »
$12,750.00
Originally $17,000.00
SILVER GRIPPED CLAUBERG 1850 STAFF AND FIELD OFFICER’S SWORD
W. Clauberg of Solingen was a prolific (according to Thillmann, the most prolific) maker of swords for import into the U.S. Specializing in higher quality workmanship, their blades show up with many… (870-655). Learn More »
$2,295.00
Originally $3,050.00
VERY RARE 1834 ENGINEER AND MEDICAL STAFF SWORD BY HENRY BOKER, BELONGING TO BREVET BRIGADIER GENERAL JOHN HENDRICKSON, WHO LOST A LEG AT FREDERICKSBURG, 83rd NEW YORK VOLS (9th NYSM) AND 13th V.R.C.
New patterns of swords for the U.S. army were developed from 1832 to 1834. This elegant smallsword pattern (variously called by collectors the 1832 or 1834 pattern) was designated for officers of… (870-325). Learn More »
$3,375.00
Originally $4,500.00
SWEDISH M-1815 SOCKET BAYONET
Following the Russian-Swedish war (2/1808 – 10/1809), the Swedish military developed new weapons. Their first step was the French inspired M-1811 musket, which with small changes was basis for the… (169-606). Learn More »
US MODEL 1832 GENERAL OFFICER’S SWORD BY N.P. AMES CUTLER, SPRINGFIELD, MASS.
Manufactured: Springfield, Mass. Maker: N.P. Ames Cutler Year: Early Springfield address Model: M1832 Size: 31.5 inch blade Condition: VG-Exc Throat and drag mounts only. Unusual top mount with single… (870-319). Learn More »
$4,395.00
Originally $5,850.00
EARLY WAR U.S. CAVALRY OFFICER’S SABER, 1840 STYLE, BY SMITH, CRANE AND COMPANY, NEW YORK, 1858 TO 1862
Smith, Crane and Company pieces are scarce. They were only in business from 1858 through 1862, retailing military goods in New York City. Their swords were imported, of German make and likely by… (870-263). Learn More »
$3,000.00
Originally $4,000.00
REMARKABLE SWORD IDENTIFIED TO GEORGE WILLIAM GORDON (1801-1877), US CONSUL TO BRAZIL (1840-46) AND SLAVE TRADE OPPONENT
A remarkable sword manufactured by W.H. Horstmann & Co., New York after the Model 1834 US Revenue Cutter/Marine sword. Neatly engraved on the reverse folding guard, “Geo. Wm. Gordon / United… (870-60). Learn More »
$7,500.00
Originally $9,000.00
CIRCA 1850 MILITIA OFFICER’S SWORD BY HORSTMANN & SONS, PHILA.
High grade, pre-war Militia officer by Horstmann with the unusual feature of no U.S. designs on the blade and a federal shield with 7 stripes and no stars on the scabbard. Manufactured: Philadelphia,… (870-208). Learn More »
$1,795.00
Originally $2,375.00
CAVALRY OFFICER’S SABRE IDENTIFIED TO CAPTAIN MARCUS A. MOORE, 1ST MASSACHUSETTS CAVALRY
Manufactured: Newark, NJ Maker: Sauerbier, Henry Year: Early Civil War Model: Model 1840 transitional with 1860 style grip Size: 34.2 inch blade, 1.17 wide, .353 thick This sword has all true Type 1… (870-159). Learn More »
$4,400.00
Originally $5,850.00
US MARINE CORPS OFFICER’S ENGLISH MADE MAMALUKE WITH IVORY GRIP
Manufactured: England Maker: Unmarked Year: C1820-25 Model: Mamaluke Size: 35.8 inch blade, 1.21 wide Condition: Excellent+ Tri-color blade - blue, gold and "white" of flat design. Ship's… (870-76). Learn More »
$6,000.00
Originally $8,000.00
IMPORT MODEL 1850 CIVIL WAR FIELD & STAFF OFFICER’S SWORD ID’D TO COL. RICHARD M. CORWINE, MEMBER OF GENERAL FREMONT’S STAFF
Original Civil War Model 1850 Field & Staff officer’s sword in nice condition complete with its metal scabbard. Sword is unmarked and is no doubt an import item. It is identified by a… (870-157). Learn More »
$12,250.00
Originally $16,200.00
CONFEDERATE CAVALRY SABER BY FROELICH
This is a very early and possibly unique Confederate cavalry saber, possibly even a cavalry officer’s saber, by Louis Froelich. It uses a crudely cast, heavy, thick guard, with the side branches… (870-614). Learn More »
$7,500.00
Originally $10,000.00
MODEL 1840 GENERAL OFFICER’S SWORD – FRENCH IMPORT
Manufactured: France Maker: Klingenthal Year: CW Size: 32 inch blade This example is in excellent condition. Scabbard retains most of the original blue finish. Mounts and drag are high grade and cast… (870-350). Learn More »
$1,995.00
Originally $2,650.00
MAMALUKE SABER MANUFACTURED IN ENGLAND
Manufactured: England Maker: William Harvey Year: 1840 - 1850 Model: Mameluke Size: 30.25 Condition: VG Wonderful Mamaluke Saber manufactured in England. Most likely for a British officer… (870-74). Learn More »
$3,375.00
Originally $4,500.00
U.S.N. REGULATION SWORD BY JOSEPH RODGERS FOR C. HALL, NORFOLK, VA
This style Eagle hilt was described by the Navy in 1830 and became the pattern for the regulation Model 1841. Manufactured: England / Norfolk, VA Maker: Joseph Rogers & Sons Year: C1830s … (870-51). Learn More »
$6,075.00
Originally $8,100.00
US MODEL 1860 AMES CAVALRY OFFICER’S SABER WITH WOOD LINED STEEL SCABBARD
Manufactured: Chicopee, Mass. Maker: Ames Mfg. Co. Year: Civil War Model: M1860 Size: 35 inch blade Condition: Excellent+ This regulation M1860 Cavalry Officer has the decorated guard with the eagle,… (870-122). Learn More »
$10,000.00
Originally $13,500.00
Showing 101 to 150 out of 170
Most Popular
Historical Firearms Stolen From The National Civil War Museum In Harrisburg, Pa »
Theft From Gravesite Of Gen. John Reynolds »
Selection Of Unframed Prints By Don Troiani »
Fine Condition Brass Infantry Bugle Insignia »
featured item
CIVIL WAR OFFICER’S GILT BRASS EAGLEHEAD SPURS IN ORIGINAL COLOR
This is a very good condition set of nicely detailed eaglehead spurs with 80 or 90 percent of their gilt finish on the exterior, cast and chased with the outstretched wings making up the entirety of the sidebars. The wing feathers are in raised… (490-6821). Learn More »
site search
