Showing 321 to 340 out of 387
Face has a dark patina throughout with small light patches of discoloration. Detail to the eagle is good. Reverse has 100% of the lead fill with a nice smooth finish. Only one of the hooks are… (595-1903). Learn More »
Skin is in good condition with no cracks or missing material. Nice patina to the face and good detail to the eagle. One edge is slightly pushed causing the plate to be out of round a bit. Reverse has… (1184-97). Learn More »
Face is in nice condition and free of cracks and chips. Detail to the eagle is good however some of it is subdued due to the contrasting light and dark surface patina. Reverse has 100% of the lead and… (565-1902). Learn More »
This is the classic Civil War Confederate wood canteen made with simple lathe-turned front and back faces under curved and grooved staves secured with narrow iron hoops that are in turn kept in place… (490-4172). Learn More »
These plates, measuring 56 X 87mm, followed the standard U.S. 1839 version, but with VMM stamped in the rolled brass indicating Volunteer Militia of Maine. These were paired on equipment with the… (1184-148). Learn More »
These plates were introduced in 1826 for use on the bayonet shoulder belt. When the bayonet was switched to wear on the waistbelt in the early 1840s these plates with hooks were relegated to use on… (1184-136). Learn More »
This is a Cavalry shoulder sling designed for use with weapons fitted with sling rings (musketoon, rifled carbine, and all patented breech-loading carbines). The sling was to be worn over the left… (160-80). Learn More »
This Federal shoulder belt plate is of the regulation 1826 pattern. Constructed in the die-struck and rolled brass method, the brass accoutrement’s face shows a clear eagle in the center. Face has a… (2022-1849). Learn More »
Leather belt meas. approx. 1.75 inches wide x 43.50 inches long. Leather is in very good condition with only minor scuffs on one end. Die struck steel, box type buckle with a nickel or silver plated… (160-62). Learn More »
This woven canvas belt was made by the Hurlburt Company as evidenced by the three blue horizontal lines worked into the belt. It holds fifty .30 caliber rounds in loops that are sewn to the… (380-25). Learn More »
This is made of die-struck rolled brass in the usual fashion of the M1839 plate and has a single arrow back stud and belt hook soldered in place on the reverse, a pattern of fastener well known from… (2022-2281). Learn More »
This is a pretty militia plate using an American eagle with arrows and olive branch as the central motif on the scalloped corner panel at center along with a US shield on its chest that has a single… (1184-146). Learn More »
This is a nice excavated SNY belt plate. Pattern 1839 belt buckle with puppy-paw hooks. Beautiful brown face with the letters “SNY” in the center. Light wear over face with smooth chocolate brown… (2022-1554). Learn More »
$495.00
SOLD
These buff cloth epaulettes are in very good condition with only light surface dirt from age and storage throughout. There is no damage of any kind. The body of each is covered in a buff colored cloth… (37-386). Learn More »
$350.00
Originally $550.00
This sword belt plate is very similar to some wartime and prewar Virginia plates, but we feel it probably postdates the war, though excavated in Orange, Virginia. The central disk with narrow edge… (1184-117). Learn More »
This is the regulation sword belt for U.S. officers in the Civil War. The rectangular eagle belt plate with the arms of the U.S. is an early style, likely prewar or very early war, made of stamped… (1052-222). Learn More »
This horn dates roughly 1820-1850. It is a plain, working powder horn only about 5 ¼ inches long, a size sometimes thought to be just for priming powder for a flintlock, but convenient enough to be… (1184-79). Learn More »
This horn dates roughly 1820-1850. It is a plain, working powder horn only about 5 3/4 inches long, a convenient size for pocket or hunting bag. Sometimes considered a small horn just for priming… (1184-77). Learn More »
Belt is made of one piece of leather approx. 31.00 inches long x 1.75 wide. The interior of the belt has a sewn seam running down the center while the exterior face of the belt has a tooled line… (490-3646). Learn More »
Unusual looking trapezoidal canteen with screwcap top. The body of the canteen is made of tin and meas. approx. 4.50 inches across the bottom and 5,50 at the upper widest point. It is 7.00 inches tall… (2022-608). Learn More »
Showing 321 to 340 out of 387
Historical Firearms Stolen From The National Civil War Museum In Harrisburg, Pa »
Theft From Gravesite Of Gen. John Reynolds »
Selection Of Unframed Prints By Don Troiani »
Fine Condition Brass Infantry Bugle Insignia »
Large English Bowie Knife With Sheath 1870’S – 1880’S »
Imported (Clauberg) Us Model 1860 Light Cavalry Officer's Saber »
This coat came directly out of the family along with a reunion badge and type-written copy of the officer’s 1906 reminiscences. The coat was formerly in the collection of Steve Mullinax, is accompanied by a file containing details of its… (1179-179). Learn More »