Relics

Showing 241 to 260 out of 299


EXCAVATED MODEL 1855 PISTOL CARBINE PART

EXCAVATED MODEL 1855 PISTOL CARBINE PART

This unusual weapon consisted of a large single shot pistol that had a detachable shoulder stock which theoretically transformed it into a carbine. Here are two excavated brass parts from the pistol… (1000-1147). Learn More »

RELIC MODEL 1855 LOCKPLATE AND HAMMER

RELIC MODEL 1855 LOCKPLATE AND HAMMER

Excavated iron lockplate from a Model 1855 rifle musket.  Lockplate with hammer and components. Hump back style plate featuring cutout for Maynard’s primers.  Relic is encrusted with rust and has… (1000-2115). Learn More »

DUG CONFEDERATE SPUR

DUG CONFEDERATE SPUR

This is a nice, excavated Confederate spur.  It is cast brass and retains a good green patina.  Possibly a copy of a civilian style. Has curved neck with no iron rowel remaining.  Slight bend at… (1000-1520). Learn More »

DUG CONFEDERATE SPUR

DUG CONFEDERATE SPUR

This is a nice, excavated Confederate spur. Similar in style to federal spurs. It is cast brass and retains a good green patina.  Has squared-off neck with no iron rowel remaining.  Slight bend in… (1000-1515). Learn More »

DUG CIVIL WAR ID DISK FOR 12TH PENNSYLVANIA RESERVES (41st PENNSYLVANIA) SOLDIER

DUG CIVIL WAR ID DISK FOR 12TH PENNSYLVANIA RESERVES (41st PENNSYLVANIA) SOLDIER

Front of the tag has a bust of General McClellan surrounded by “MAJOR GENERAL GEO. B. MCCLELLAN / WAR OF 1861.” Face is dark with gilt remaining in the low areas. Reverse is stamped “DANIEL… (1000-1836). Learn More »

EXCAVATED CONFEDERATE “BEVELED EDGE” FRAME BUCKLE

EXCAVATED CONFEDERATE “BEVELED EDGE” FRAME BUCKLE

Small Confederate frame buckle measuring 55mm wide x 63mm tall.  Dug belt buckle with even tan patina. Excellent condition with nice original “body curve”. Recovered from central Virginia. … (1000-1320). Learn More »

GREAT CONFEDERATE SIDE KNIFE

GREAT CONFEDERATE SIDE KNIFE

Here is the stereotypical Confederate side knife as seen in so many southern tintype images.  This one is in relic condition; possibly dug, possibly found in a barn.  The iron is rusted but most of… (1000-750). Learn More »

CONFEDERATE .69 SOCKET BAYONET MADE INTO POT/BODY HOOK

CONFEDERATE .69 SOCKET BAYONET MADE INTO POT/BODY HOOK

Bayonet has a blade section that is made of one solid piece of triangular shaped iron. All three surfaces of the blade are smooth and minus any fullers. Blade section has a broken tip and has been… (1000-742). Learn More »

RELIC RICHMOND MUSKET TOOL

RELIC RICHMOND MUSKET TOOL

Excavated Confederate musket tool.  Hand forged iron tool manufactured at Richmond.  Constructed of one 3 ½” long arm with a box-end wrench on the end.  A second piece, 3” long with a screw… (1000-1201). Learn More »

EXCAVATED MODEL 1855 SOCKET BAYONET MADE INTO POT HOOK

EXCAVATED MODEL 1855 SOCKET BAYONET MADE INTO POT HOOK

This is a M-1855 socket bayonet in very good, “dug” condition.  Bayonet has been cleaned and coated and the iron is in very stable condition.  The tip has been broken off and the next 2 ½”… (1000-1380). Learn More »

RARE CONFEDERATE “THREE SQUARE” SOCKET BAYONET

RARE CONFEDERATE “THREE SQUARE” SOCKET BAYONET

This is an excavated example of a Confederate-made musket socket bayonet, probably for a M-1816 musket.  Measuring 20” overall with a 2 5/8” socket.  This was made for an early .69 caliber… (1000-1385). Learn More »

RARE CONFEDERATE “THREE SQUARE” SOCKET BAYONET FROM DREWRY’S BLUFF

RARE CONFEDERATE “THREE SQUARE” SOCKET BAYONET FROM DREWRY’S BLUFF

This is an excavated example of a Confederate-made musket socket bayonet.  Measuring 21” overall with a 2 5/8” socket.  This was made for an early .69 caliber musket with a bayonet lug mounted… (1000-1372). Learn More »

RARE CONFEDERATE “THREE SQUARE” SOCKET BAYONET MADE INTO POT HOOK

RARE CONFEDERATE “THREE SQUARE” SOCKET BAYONET MADE INTO POT HOOK

This is an excavated example of a Confederate-made musket socket bayonet.  Measuring approximately 21” overall with a 2 ¾” socket.  This was made for an early .69 caliber musket with a bayonet… (1000-1374). Learn More »

MODEL 1816 BAYONET ALTERED INTO A HOE OR DIGGING TOOL

MODEL 1816 BAYONET ALTERED INTO A HOE OR DIGGING TOOL

This item consists of a 3.00 inch long socket with a generally “T”-shaped lug mortise. Knuckle was straightened and only 5.50 inches of the blade remains. When the blade was cut down the end was… (1000-1369). Learn More »

EXCAVATED CIVIL WAR “VMM” OVAL WAIST BELT PLATE

EXCAVATED CIVIL WAR “VMM” OVAL WAIST BELT PLATE

Presented here is an excavated “Volunteer Militia of Maine” oval waist belt plate that was issued to the State’s volunteer infantrymen early in the Civil War. Maine formally organized its… (1000-1541). Learn More »

EXCAVATED CIVIL WAR “VMM” OVAL WAIST BELT PLATE

EXCAVATED CIVIL WAR “VMM” OVAL WAIST BELT PLATE

Presented here is an excavated “Volunteer Militia of Maine” oval waist belt plate that was issued to the State’s volunteer infantrymen early in the Civil War. Maine formally organized its… (1000-1539). Learn More »

EXCAVATED “OVM” WAIST BELT PLATE

EXCAVATED “OVM” WAIST BELT PLATE

This Civil War Ohio Volunteer Militia Enlisted Infantry belt plate, is in good excavated condition.  This early war belt plate measures 52 mm x 75 mm and is constructed from die-struck rolled sheet… (1000-1540). Learn More »

SHIPWRECK RECOVERED STATE OF NEW YORK BUCKLE

SHIPWRECK RECOVERED STATE OF NEW YORK BUCKLE

This relic is an “SNY” (State of New York) buckle. Only the lead remains, the brass face and iron belt hooks deteriorated in the ocean long ago. This is an excellent example from this wreck site… (883-33). Learn More »

$300.00
Originally $400.00

SHIPWRECK RECOVERED STATE OF NEW YORK BUCKLE

SHIPWRECK RECOVERED STATE OF NEW YORK BUCKLE

This relic is an “SNY” (State of New York) buckle. Only the lead remains, the brass face and iron belt hooks deteriorated in the ocean long ago. This is an excellent example from this wreck site… (883-34). Learn More »

$300.00
Originally $400.00

EXCAVATED SOUTH CAROLINA LOCAL BUTTON, SC20A

EXCAVATED SOUTH CAROLINA LOCAL BUTTON, SC20A

Excavated South Carolina Confederate Local Button SC20A. The word in the motto is misspelled "OPIRUSQUE". Backmark: "W. Wildt & Son" rmdc 23mm. Shank possibly replaced. Smooth brown patina.… (127-1027). Learn More »


Showing 241 to 260 out of 299

featured item

MAMALUKE SABER MANUFACTURED IN ENGLAND

Manufactured: England  Maker: William Harvey  Year: 1840 - 1850  Model: Mameluke  Size: 30.25  Condition: VG Wonderful Mamaluke Saber manufactured in England.  Most likely for a British officer but possible it was imported to the US market. … (870-74). Learn More »

Upcoming Events

06
Dec
Instagram