site search
online catalog
Firearms
Showing 261 to 280 out of 315
SCARCE MODEL 1841 SPRINGFIELD CADET MUSKET, DATED 1844
Model 1841 Cadet Musket was produced at Springfield Armory between 1844 and 1845. This is one of only 450 of these weapons produced. Intended for the Corps of Cadets at West Point. This is a .57… (1000-138). Learn More »
$6,800.00
Originally $8,500.00
90-BORE (~.36 CALIBER) SHARPS “SPORTING RIFLE” CARTRIDGE
This style of cartridge was originally made prior to the Civil War and eventually replaced in the North by the “New Model” linen cartridges. However, the simple method of just tying the plain… (1212-87). Learn More »
60-BORE (~.44 CALIBER) SHARPS CARTRIDGE, GOMEZ & MILLS PATENT
Here is a very rare 60-Bore Sharps cartridge with a multi-groove bullet by Gomez and Mills. This cartridge is in fine condition. The paper is crisp, and you can clearly see where another cartridge… (1212-85). Learn More »
COPY OF “ELEY CARTIDGES” FROM THE LIBRARY OF THE LATE DEAN S. THOMAS
The full title of this volume is “ELEY CARTRIDGES: A HISTORY OF THE SILVERSMITHS AND AMMUNITION MANUFACTURERS” by C. W. Harding and published by Quiller Press of Wykey, Shrewsbury, England in… (236-469). Learn More »
ELEGANT DOUBLE COMPARTMENT PISTOL POWDER FLASK
This small pistol flask is embossed with an attractive pair of oak leaf and acorn clusters in the top quarter, below which a long, thin, scrolling chevron with dots separates it from a pair of knotted… (490-5380). Learn More »
1849 DATED MEXICAN WAR ERA BATTY “PEACE” POWDER FLASK
Brass powder flask in good condition. The body has one small ding at bottom with a small seam opening. The decoration on the flask consists of a spread-winged eagle above a circle of 20 five-pointed… (160-170). Learn More »
SMALL PISTOL POWDER FLASK
This is very small powder flask, possibly of European manufacture and perhaps made on contract for an American retailer, intended for a pocket revolver or small single shot pistol. Measures… (490-5248). Learn More »
MODEL 1858 CADET MUSKET DATED 1858
An original Springfield Model 1858 Cadet rifle musket in .58 caliber in nice condition. Metal surfaces appear to have been cleaned and are bright. The 38.00-inch barrel has a surface that wears a… (490-3489). Learn More »
SMALL PISTOL POWDER FLASK
This is very small powder flask, possibly of European manufacture and perhaps made on contract for an American retailer, intended for a pocket revolver or small single shot pistol. Measures… (490-5247). Learn More »
BULLET MOLD FOR .31 CALIBER REVOLVER
Iron, two cavity bullet mold for the .31 caliber revolver. It casts one round ball and one elongated bullet. There is no sprue cutter. Cavities remain clean and crisp. There are several small dings on… (490-4365). Learn More »
BULLET MOLD FOR .31 CALIBER REVOLVER
Iron, two cavity bullet mold for the .31 caliber revolver. It casts one round ball and one elongated bullet. There is no sprue cutter. There are several small dings on exterior where the mold needed… (490-4364). Learn More »
BULLET MOLD FOR .31 CALIBER (120 GAUGE) ADAMS REVOLVER
Brass, two cavity bullet mold for 120 gauge (approx. .31 caliber) English Adams revolver. It casts two elongated bullets. These feature a pointy nose, two grooves, and a solid base. Iron sprue cutter… (490-4378). Learn More »
M-1855 MAINSPRING VISE FOR CONVERSION MUSKETS
Mainspring vise for the many types of early muskets that were converted to percussion ignition. Typical vise mechanism with offset bar to accommodate the older flintlock mainsprings. Excellent… (490-4363). Learn More »
PLAIN PISTOL POWDER FLASK
Constructed with plain copper body and brass top. Funnel unscrews and spring still works. Measures approximately 4.5" tall x 1.5" wide x 1" thick. All surfaces are unadorned, with sides that have… (490-4416). Learn More »
BULLET MOLD FOR .45 CALIBER, COLT M1878 REVOLVER
Iron, two cavity bullet mold for the .45 caliber Colt Model 1878 revolver. It casts two elongated bullets with grooves. These are the “.45 Long Colt” bullets. Sprue cutter is attached to the top… (490-4399). Learn More »
M-1855 MAINSPRING VISE FOR CONVERSION MUSKETS
Mainspring vise for the many types of early muskets that were converted to percussion ignition. Typical vise mechanism with offset bar to accommodate the older flintlock mainsprings. Excellent… (490-4380). Learn More »
CIVIL WAR LEATHER HOLSTER FOR COLT ROOT OR SIMILAR POCKET REVOLVERS
The black leather of the holster is somewhat stiff but can be coaxed to take a weapon. The leather surface shows light crazing throughout. The holster has a rather wide flap with two parallel rows of… (490-3203). Learn More »
RARE BULLET MOLD FOR .31 CALIBER "WELLS FARGO" M-1849 COLT REVOLVER
Very rare iron, two cavity bullet mold for the .31 caliber "Wells Fargo" Colt revolver. It casts one round ball and one elongated bullet. There is no sprue cutter. Marked "COLT'S / PATENT" across the… (490-4400). Learn More »
1985 STUDY ON THE KENTUCKY RIFLE BY THE KENTUCKY RIFLE ASSOCIATION
The full title of this volume is “THE KENTUCKY RIFLE; A TRUE AMERICAN HERITAGE IN PICTURE” by The Kentucky Rifle Association and published by Forte Group of Alexandria, Virginia in 1985. The… (1032-132). Learn More »
VOLUME 1 ONLY OF “AMERICAN MILITARY SHOULDER ARMS” BY MOLLER
The full title of this volume is “AMERICAN MILITARY SHOULDER ARMS – VOLUME 1: COLONIAL AND REVOLUTIONARY WAR ARMS” by George D. Moller and published by University Press of Colorado in 1993. The… (1032-131). Learn More »
Showing 261 to 280 out of 315
Most Popular
Historical Firearms Stolen From The National Civil War Museum In Harrisburg, Pa »
Theft From Gravesite Of Gen. John Reynolds »
Selection Of Unframed Prints By Don Troiani »
Fine Condition Brass Infantry Bugle Insignia »
Rare Identified 65Th Ny Sergeant’s Jacket, With Manscript Material: 1St U.s. Chasseurs »
featured item
CIVIL WAR MESS CHEST, COMPANY G 6th MASSACHUSETTS VOL. MILITIA
This Civil War mess chest was stenciled twice on the underside of the lid by William Boyd Tingley, the wagoner of Company G of the 6th Mass Volunteer Militia, who was probably charged with transporting it for the company officers. This measures 24”… (1202-869). Learn More »
site search
