site search
online catalog
Relics
Showing 281 to 300 out of 360
DUG PATTERN 1826 EAGLE BREAST PLATE WITH BAYONET MARKS
Face has a dark patina throughout with small light patches of discoloration. Detail to the eagle is good. Reverse has 100% of the lead fill with a nice smooth finish. Only one of the hooks are… (595-1903). Learn More »
EXCAVATED CIVIL WAR ID DISK – BATTLE HONORS BUT NO NAME
Pewter “WAR OF 1861” style identification disk. In “dug” condition showing expected small chipping and edge wear. Much of the plating remains on the front and back faces. The side that would… (2022-2442). Learn More »
SKIN ONLY OF A US PATTERN 1826 EAGLE BREAST PLATE
Skin is in good condition with no cracks or missing material. Nice patina to the face and good detail to the eagle. One edge is slightly pushed causing the plate to be out of round a bit. Reverse has… (1184-97). Learn More »
DUG PATTERN 1826 EAGLE BREAST PLATE
Face is in nice condition and free of cracks and chips. Detail to the eagle is good however some of it is subdued due to the contrasting light and dark surface patina. Reverse has 100% of the lead and… (565-1902). Learn More »
PATTERN 1826 EAGLE BREAST PLATE RECOVERED AT FREDERICKSBURG
Plate is in solid condition. There are no visible cracks or chips. The edge is complete with no missing brass. Eagle is slightly subdued by the brown dirt patina which has filled in some of the lower… (2022-1428). Learn More »
RELIC PATTERN 1853 ENFIELD BAYONET
Bayonet is complete with a full-length triangular blade, socket and frozen locking ring. All are encrusted with a thin layer of rust. No markings are visible. Location of recovery is not known. … (490-3225). Learn More »
$145.00
ON HOLD
RELIC MODEL 1816 SOCKET BAYONET - POSSIBLE CS
Bayonet is complete with a full-length triangular blade and socket with mortise. All is encrusted with a thin layer of rust. No markings are visible. Half-way down the length of one of the blades… (490-3272). Learn More »
RARE “DUG” RELOADABLE IRON CHAMBER FOR AGAR/UNION REPEATING GUN
Offered here is an iron tube that was used in the .58 caliber, Union Repeating Gun (aka Coffee Mill gun, Agar). Paper cartridges were loaded into these reusable iron chambers. The chamber features… (2022-2815). Learn More »
RARE 90-BORE (~.36 CALIBER) BULLET FOR CHRISTIAN SHARPS PISTOL
This is the scarce bullet for the Christian Sharps pistols manufactured between 1857-1858. Solid bullet, raised bands, tie ring, nipped sprue on base. This pattern of bullet, with extended ring,… (2022-2612B). Learn More »
RARE 90-BORE (~.36 CALIBER) BULLET FOR CHRISTIAN SHARPS PISTOL
This is the scarce bullet for the Christian Sharps pistols manufactured between 1857-1858. Solid bullet, raised bands, tie ring, nipped sprue on base. This pattern of bullet, with extended ring,… (2022-2612A). Learn More »
CONFEDERATE .36 CALIBER COLT REVOLVER BULLET – 3RD PATTERN, RICHMOND LABORATORY
.36 caliber bullet for Colt and other “Navy” revolvers. This is the later-war, enlarged, 3rd pattern bullet made at the Richmond Laboratory. This bullet has a more-bulbous nose, solid base and one… (2022-2506). Learn More »
FIRED .52 CAL. SPENCER BULLET RECOVERED AT GETTYSBURG BY JOHN CULLISON
This item was recovered by local Gettysburg resident John Cullison, who excavated relics on the field from 1935-1959. Cullison sold his collection to the famed Rosensteel family of Gettysburg, who… (R17340). Learn More »
MAINE “VMM” CARTRIDGE BOX PLATE FROM ORANGE, VIRGINIA
These plates, measuring 56 X 87mm, followed the standard U.S. 1839 version, but with VMM stamped in the rolled brass indicating Volunteer Militia of Maine. These were paired on equipment with the… (1184-148). Learn More »
CIVIL WAR NCO ROUND EAGLE SHOULDER BELT PLATE
These plates were introduced in 1826 for use on the bayonet shoulder belt. When the bayonet was switched to wear on the waistbelt in the early 1840s these plates with hooks were relegated to use on… (1184-136). Learn More »
EARLY RELIC FIRE STRIKERS (A.K.A. STRIKE-A-LIGHTS)
Offered here are a variety of steel fire strikers; the “steel” part of “flint and steel.” A fire striker is a piece of carbon steel from which sparks are struck by the sharp edge… (160-93). Learn More »
FIRED .577 ENFIELD BULLETS RECOVERED AT GETTYSBURG BY JOHN CULLISON
This item was recovered by local Gettysburg resident John Cullison, who excavated relics on the field from 1935-1959. Cullison sold his collection to the famed Rosensteel family of Gettysburg, who… (R17332). Learn More »
DROPPED .54 CAL. MINIE BALLS RECOVERED AT GETTYSBURG BY JOHN CULLISON
This item was recovered by local Gettysburg resident John Cullison, who excavated relics on the field from 1935-1959. Cullison sold his collection to the famed Rosensteel family of Gettysburg, who… (R17331). Learn More »
US PATTERN 1826 EAGLE BREAST PLATE, FROM G.A.R. POST 551 COLLECTION (YORK SPRINGS, PA)
This Federal shoulder belt plate is of the regulation 1826 pattern. Constructed in the die-struck and rolled brass method, the brass accoutrement’s face shows a clear eagle in the center. Face has a… (2022-1849). Learn More »
RELIC WORLD WAR ONE BRITISH SMLE WIRE CUTTER HEAD
During World War One the ubiquitous wire cutters played an important role in trench raids and assaults. Leading elements would use these cutters to penetrate the enemies wire entanglements and clear a… (490-3926). Learn More »
RELIC – BIG BROKEN BRASS SPUR FROM ORANGE, VIRGINIA
This is about half of an excavated spur…very large and heavy western-style spur. This piece consists of one are and the neck/rowel. The other arm is broken off and missing. Measures approximately… (1184-389). Learn More »
Showing 281 to 300 out of 360
Most Popular
Historical Firearms Stolen From The National Civil War Museum In Harrisburg, Pa »
Theft From Gravesite Of Gen. John Reynolds »
Selection Of Unframed Prints By Don Troiani »
Fine Condition Brass Infantry Bugle Insignia »
British Imported, Confederate Used Bayonet »
Scarce New Model 1865 Sharps Still In Percussion Near Factory New »
featured item
“SOFT TACK:” AERATED BREAD CRATE
This would make a nice addition to a camp, sutler, Sanitary Commission or even a hospital display. Constructed of thin, about ½” thick, unpainted, wide pine boards that are simply nailed together, this is about 18” X 13 ¾” X 12” and is… (1202-166). Learn More »
site search
