Showing 61 to 80 out of 117
This attractive and unusual piece is a three-compartment powder flask. The unadorned body is copper while the top and bottom are of brass. Thumbpiece and spring are complete and in place. The spout is… (490-5244). Learn More »
Brass, two cavity bullet mold for the .28 caliber "Root" Colt revolver. It casts one round ball and one elongated bullet. Iron sprue cutter is attached to the top and is lightly marked "COLT'S /… (490-4366). Learn More »
Iron, two cavity bullet mold for the .31 caliber revolver. It casts one round ball and one elongated bullet. There is no sprue cutter. Cavities remain clean and crisp. There are several small dings on… (490-4365). Learn More »
Iron, two cavity bullet mold for the .31 caliber revolver. It casts one round ball and one elongated bullet. There is no sprue cutter. There are several small dings on exterior where the mold needed… (490-4364). Learn More »
Brass, two cavity bullet mold for 120 gauge (approx. .31 caliber) English Adams revolver. It casts two elongated bullets. These feature a pointy nose, two grooves, and a solid base. Iron sprue cutter… (490-4378). Learn More »
Mainspring vise for the many types of early muskets that were converted to percussion ignition. Typical vise mechanism with offset bar to accommodate the older flintlock mainsprings. Excellent… (490-4363). Learn More »
This horn likely dates to roughly 1750 to 1825 or so, and follows a classic York County style with a domed wood base plug with turned grooves. It features two fine lines turned around the base of the… (490-4338). Learn More »
$495.00
ON HOLD
Constructed with plain copper body and brass top. Funnel unscrews and spring still works. Measures approximately 4.5" tall x 1.5" wide x 1" thick. All surfaces are unadorned, with sides that have… (490-4416). Learn More »
Unusual flask with side-by-side compartments for black powder and bullets. There is also a small third compartment on the bottom to hold extra flints. Constructed with copper body and brass top and… (490-4415). Learn More »
Iron, two cavity bullet mold for the .45 caliber Colt Model 1878 revolver. It casts two elongated bullets with grooves. These are the “.45 Long Colt” bullets. Sprue cutter is attached to the top… (490-4399). Learn More »
Offered here is an early gang mold for round shot of varying calibers. Made of brass and measuring just over 8.5" long with the reproduction wood handles attached. Hinged at one end with long tapered… (490-4387). Learn More »
$295.00
ON HOLD
Mainspring vise for the many types of early muskets that were converted to percussion ignition. Typical vise mechanism with offset bar to accommodate the older flintlock mainsprings. Excellent… (490-4380). Learn More »
Offered here is a “regulation” paper cartridge for the Model 1842, .69 caliber muskets that had been rifled after the fact. The paper cartridge contains a large caliber 3-groove minie ball and… (2023-303). Learn More »
$250.00
SOLD
Iron, two cavity bullet mold for the .44 caliber Colt Army revolver. It casts one round ball and one elongated bullet. Sprue cutter is attached to the top and is marked "COLT'S / PATENT". Cavities… (490-4376). Learn More »
$195.00
ON HOLD
This is very small powder flask, likely of European manufacture and perhaps made on contract for an American retailer, intended for a pocket revolver or small single shot pistol. The copper body… (30-2250). Learn More »
$200.00
Originally $295.00
This powder flask was certainly made for the American market. The bottom is fitted with two small, round hinged covers for interior compartments, each with an eagle with raised wings, a U.S. shield on… (30-2245). Learn More »
$575.00
Originally $695.00
Very rare iron, two cavity bullet mold for the .31 caliber "Wells Fargo" Colt revolver. It casts one round ball and one elongated bullet. There is no sprue cutter. Marked "COLT'S / PATENT" across the… (490-4400). Learn More »
Regulation tan paper cartridge for the U.S. .58 caliber rifled musket. This is the typical "minie ball" cartridge of the American Civil War. Known as the "regulation" or "American military" style of… (490-4355). Learn More »
$125.00
ON HOLD
Offered here is a lot of nine pinfire shotgun cartridges. One is loaded, all others are unused, empty shells waiting to be filled. The one loaded shell has raised “ELEY LONDON / 12 / 1861” on the… (M23280). Learn More »
A much-used appendage for Civil War muskets. This wiper would be screwed on to the threaded end of a ramrod and used to “pull” bullets or to extract cartridge paper and cleaning patches. This… (30-2256). Learn More »
$75.00
ON HOLD
Showing 61 to 80 out of 117
Historical Firearms Stolen From The National Civil War Museum In Harrisburg, Pa »
Theft From Gravesite Of Gen. John Reynolds »
Cavalry Carbine Sling Swivel »
Fine Condition Brass Infantry Bugle Insignia »
Manufactured: England Maker: William Harvey Year: 1840 - 1850 Model: Mameluke Size: 30.25 Condition: VG Wonderful Mamaluke Saber manufactured in England. Most likely for a British officer but possible it was imported to the US market. … (870-74). Learn More »