site search
online catalog
Cartridges & Gun Tools
Showing 1 to 20 out of 106
MINTY TIN OF MAYNARD TAPE PRIMERS WITH PAPER LABEL, DATED MAY 1859
Cylindrical japanned-tin container filled with ten roles of Maynard tape primers. Container is in great shape with only the most minor of scratches in the brown finish. Closed with lid. Pasted to the… (2026-683). Learn More »
BOOK -- THE BIRMINGHAM CARTRIDGE MANUFACTURERS BY HARDING
Hardcover with a dust jacket, 282 pages, 8.5” x 11”. Well-illustrated with some color. Fine condition with just light wear to dust jacket. Publisher by Quiller in 2009.… (236-731). Learn More »
$60.00
ON HOLD
COLLECTION OF RIMFIRE CARTRIDGES
Offered here is a 12” x 8” display case containing 41 old copper-cased rimfire cartridges. Cartridges include a few blanks, some loaded with shot, and most are standard rounds with… (236-1281). Learn More »
$125.00
ON HOLD
SMALL POWDER FLASK WITH EAGLE MOTIF FOR REVOLVERS
This small flask is likely for early pocket model revolvers in cased sets. Constructed with a copper body and brass top and spout. Measures approximately 4.25” tall x 2” at widest point. Both… (2026-378). Learn More »
WILLIAMS PATENT BULLETS AND BLUE PAPER CARTRIDGE
Offered here is a 6” x 5” display case with a .58 caliber Williams type I, type II, and type III patent bullet along with a complete and original Williams rifle musket cartridge. The cartridge is… (2026-357). Learn More »
$200.00
ON HOLD
“PUBLIC PROPERTY” MARKED POWDER FLASK
These flasks were made for use with military rifles, particularly the 1817 Common Rifle, but could be used with the Hall or any of the older patterns still in service. Producing hollow-body copper… (1309-752). Learn More »
1853 BATTY PEACE FLASK
This is a copper and brass powder flask in nice condition. Measures approximately 9” tall x 4” at widest point. Both sides are adorned with a spread-winged eagle above a circle of stars that… (1256-80). Learn More »
FLORAL OR SEASHELL EMBOSSED POCKET PISTOL FLASK
A delicate, small-sized powder flask measuring just 2-3/4” by 1-1/2” and likely intended for a small pocket pistol or revolver. The body is embossed on both sides with a narrow, fan-shaped or… (1309-335). Learn More »
RARE BULLET MOLD FOR .28 CALIBER, COLT "ROOT" REVOLVER
Brass, two cavity bullet mold for the .28 caliber Colt Model 1855 Side-hammer, also known as the Colt Root Revolver. Named for engineer Elisha K. Root (1808–1865). The revolver was a cap and… (1304-143). Learn More »
1848 DATED BATTY PEACE FLASK
A very nice good example an 1848-dated regulation rifleman’s flask that would go well with an 1817 Common Rifle, Hall, or even a Mississippi. Robert Dingee had produced powder flasks for riflemen… (1304-130). Learn More »
VERY FINE, VERY RARE .36 CALIBER, 6-CAVITY GANG MOLD FOR COLT M1851 NAVY REVOLVER
Measuring 13” long, this iron bullet mold casts six .36 caliber elongated pistol bullets. Turned wood handles and brass ferrules are fitted over the arms of the mold halves. The sprue cutter is… (1304-117). Learn More »
RARE BULLET MOLD FOR .31 CALIBER, M1849 COLT "WELLS FARGO" REVOLVER
Iron, two cavity bullet mold for the .31 caliber Colt Model 1849 “Wells Fargo” Pocket Revolver. The revolver was a cap and ball single-action pocket revolver. This is one of the rarest and most… (1304-148). Learn More »
BRASS BULLET MOLD FOR .31 CAL. 1849 POCKET REVOLVER
Here is a very good, clean brass mold for pocket model revolvers (.31 caliber). Two cavity type; one round ball, one “heeled” conical ball, circa 1855-1856. Cavities are clean. Integral sprue… (1304-144). Learn More »
.36 CAL. “COLT’S PATENT” MOLD FOR 1862 COLT POLICE MODEL
Here is a very fine bullet mold for Police or Navy revolvers (.36 caliber). This is a straight-leg, two cavity type; one round ball, one New Model conical ball. Typical Civil War-era mold marked… (1304-146). Learn More »
VERY NICE, VERY LARGE CALIBER IRON MUSKET BALL MOLD
Iron scissor-type mold to cast a lead round ball for old muskets. Single cavity mold with spout and a sprue cutter in handle. Cavity measures approximately 0.785”. The number “10” is stamped… (1309-237). Learn More »
VERY NICE .75 CALIBER IRON MUSKET BALL MOLD
Iron scissor-type mold to cast a lead round ball for old muskets. Single cavity mold with spout and a sprue cutter in handle. Cavity measures approximately 0.72”. The number “12” is stamped in… (1309-236). Learn More »
VERY NICE BABY DRAGOON OR EARLY POCKET MODEL FLASK
This is very strong example of the “eagle on hummock” style flask supplied by dealers and retailers with Colt Baby Dragoon and early Pocket Revolvers, showing the same motif as those supplied to… (1304-60). Learn More »
CIVIL WAR SPENCER COMBINATION TOOL
These blackened iron take-down tools combine two screwdriver blades, all that is required to disassemble a Spencer rifle or carbine. They were supplied with the guns as part of the army and navy… (998-1464). Learn More »
$150.00
SOLD
RARE “US” MARKED M1841 RIFLE / M1842 MUSKET COMBINATION WRENCH
This is a gun tool that measures 3.6” in overall length. It is a combination tool with a box end percussion cone (nipple) wrench and two screwdriver blades; one fixed on the main body of the tool… (2025-2807). Learn More »
EAGLE AND SHIELD FLASK FOR REMINGTON BEALS
A good example of the eagle and shield flask embossed on both sides with an eagle with raised wings underneath an arc of nine stars, with four more flanking it, and raised lines indicating sunrays in… (2025-2410). Learn More »
Showing 1 to 20 out of 106
Most Popular
Historical Firearms Stolen From The National Civil War Museum In Harrisburg, Pa »
Theft From Gravesite Of Gen. John Reynolds »
Selection Of Unframed Prints By Don Troiani »
Fine Condition Brass Infantry Bugle Insignia »
featured item
RARE “SNELL” SWORD BAYONET – M1841 RIFLE, CIRCA 1855
Scarce “Snell” or “ring-style” sword bayonet for the Mississippi Rifle. When it became evident that riflemen needed a bayonet to put them on equal footing with regular musket-armed infantry in close combat, several methods of attaching long… (490-7260). Learn More »
site search
