site search
online catalog
Firearms
Showing 201 to 220 out of 278
IRON ROUND BALL MOLD WITH WIPER & “RAMROD”
Small iron scissor-type mold with sprue cutter between both handles. At the end of one handle is a cork screw-like “wiper” and a flat “ramrod” on the end of the other. Measures approximately… (1146-126). Learn More »
SMALL PISTOL POWDER FLASK
This is very small powder flask, possibly of European manufacture and perhaps made on contract for an American retailer, intended for a pocket revolver or small single shot pistol. Measures… (490-5248). Learn More »
MODEL 1858 CADET MUSKET DATED 1858
An original Springfield Model 1858 Cadet rifle musket in .58 caliber in nice condition. Metal surfaces appear to have been cleaned and are bright. The 38.00-inch barrel has a surface that wears a… (490-3489). Learn More »
SMALL PISTOL POWDER FLASK
This is very small powder flask, possibly of European manufacture and perhaps made on contract for an American retailer, intended for a pocket revolver or small single shot pistol. Measures… (490-5247). Learn More »
VOLUME 1 OF REFERENCE WORK CONCERNING WESTERN PENNSYLVANIA GUNSMITHS
Title is “GUNSMITHS OF WESTERN PENNSYLVANIA VOLUME 1” by Thomas J. Metzgar and James B. Whisker. Published by Old Bedford Village Press of Bedford, Pennsylvania in 1998. Volume is hardcover and… (798-74). Learn More »
PLAIN POWDER FLASK FOR REVOLVERS
This flask is for early pocket model revolvers. Constructed with a copper body, with brass top and spout. Measures approximately 4.75” tall x 2” at widest point. Both sides are plain. Thumb tab… (490-5245). Learn More »
BULLET MOLD FOR .31 CALIBER REVOLVER
Iron, two cavity bullet mold for the .31 caliber revolver. It casts one round ball and one elongated bullet. There is no sprue cutter. Cavities remain clean and crisp. There are several small dings on… (490-4365). Learn More »
BULLET MOLD FOR .31 CALIBER REVOLVER
Iron, two cavity bullet mold for the .31 caliber revolver. It casts one round ball and one elongated bullet. There is no sprue cutter. There are several small dings on exterior where the mold needed… (490-4364). Learn More »
BULLET MOLD FOR .31 CALIBER (120 GAUGE) ADAMS REVOLVER
Brass, two cavity bullet mold for 120 gauge (approx. .31 caliber) English Adams revolver. It casts two elongated bullets. These feature a pointy nose, two grooves, and a solid base. Iron sprue cutter… (490-4378). Learn More »
M-1855 MAINSPRING VISE FOR CONVERSION MUSKETS
Mainspring vise for the many types of early muskets that were converted to percussion ignition. Typical vise mechanism with offset bar to accommodate the older flintlock mainsprings. Excellent… (490-4363). Learn More »
PLAIN PISTOL POWDER FLASK
Constructed with plain copper body and brass top. Funnel unscrews and spring still works. Measures approximately 4.5" tall x 1.5" wide x 1" thick. All surfaces are unadorned, with sides that have… (490-4416). Learn More »
BULLET MOLD FOR .45 CALIBER, COLT M1878 REVOLVER
Iron, two cavity bullet mold for the .45 caliber Colt Model 1878 revolver. It casts two elongated bullets with grooves. These are the “.45 Long Colt” bullets. Sprue cutter is attached to the top… (490-4399). Learn More »
M-1855 MAINSPRING VISE FOR CONVERSION MUSKETS
Mainspring vise for the many types of early muskets that were converted to percussion ignition. Typical vise mechanism with offset bar to accommodate the older flintlock mainsprings. Excellent… (490-4380). Learn More »
BULLET MOLD FOR .44 CALIBER, COLT ARMY OR "HOLSTER" REVOLVER
Iron, two cavity bullet mold for the .44 caliber Colt Army revolver. It casts one round ball and one elongated bullet. Sprue cutter is attached to the top and is marked "COLT'S / PATENT". Cavities… (490-4376). Learn More »
COMPARTMENTED POWDER FLASK FOR THE AMERICAN MARKET, LIKELY FOR A CASED PAIR OF PHILADELPHIA DERRINGERS
This powder flask was certainly made for the American market. The bottom is fitted with two small, round hinged covers for interior compartments, each with an eagle with raised wings, a U.S. shield on… (30-2245). Learn More »
$575.00
Originally $695.00
CIVIL WAR LEATHER HOLSTER FOR COLT ROOT OR SIMILAR POCKET REVOLVERS
The black leather of the holster is somewhat stiff but can be coaxed to take a weapon. The leather surface shows light crazing throughout. The holster has a rather wide flap with two parallel rows of… (490-3203). Learn More »
CIVIL WAR FLAP HOLSTER FOR SMALL POCKET MODEL REVOLVERS
This is a black leather holster made for revolvers. The leather still shows the faint “profile” of a revolver cylinder and barrel. A .31 caliber “pocket” model Colt fits into this holster. The… (2022-1071). Learn More »
RARE BULLET MOLD FOR .31 CALIBER "WELLS FARGO" M-1849 COLT REVOLVER
Very rare iron, two cavity bullet mold for the .31 caliber "Wells Fargo" Colt revolver. It casts one round ball and one elongated bullet. There is no sprue cutter. Marked "COLT'S / PATENT" across the… (490-4400). Learn More »
1985 STUDY ON THE KENTUCKY RIFLE BY THE KENTUCKY RIFLE ASSOCIATION
The full title of this volume is “THE KENTUCKY RIFLE; A TRUE AMERICAN HERITAGE IN PICTURE” by The Kentucky Rifle Association and published by Forte Group of Alexandria, Virginia in 1985. The… (1032-132). Learn More »
VOLUME 1 ONLY OF “AMERICAN MILITARY SHOULDER ARMS” BY MOLLER
The full title of this volume is “AMERICAN MILITARY SHOULDER ARMS – VOLUME 1: COLONIAL AND REVOLUTIONARY WAR ARMS” by George D. Moller and published by University Press of Colorado in 1993. The… (1032-131). Learn More »
Showing 201 to 220 out of 278
Most Popular
Historical Firearms Stolen From The National Civil War Museum In Harrisburg, Pa »
Theft From Gravesite Of Gen. John Reynolds »
Selection Of Unframed Prints By Don Troiani »
Fine Condition Brass Infantry Bugle Insignia »
British Imported, Confederate Used Bayonet »
Scarce New Model 1865 Sharps Still In Percussion Near Factory New »
featured item
SINGLE SHOT PERCUSSION PISTOL BY HOLLIS OF LONDON PRESENTED TO BEVERLY KENNON, CSN
Offered here is a single shot .54 caliber percussion pistol is a product of gunmaker Richard Hollis of London, England, and identified to a navy officer who served in the U.S. and C.S. navies. The pistol measures approximately 10” long. The… (1268-689). Learn More »
site search
