Cartridges & Gun Tools

Showing 61 to 80 out of 114


PASTEBOARD PACKAGE OF FRENCH PERCUSSION CAPS

PASTEBOARD PACKAGE OF FRENCH PERCUSSION CAPS

Here is a very nice French pasteboard percussion cap container, unopened and full of caps. Round package made of white pasteboard with green paper labels affixed. A white paper label was pasted along… (1212-250). Learn More »

PASTEBOARD PACKAGE OF FRENCH PERCUSSION CAPS

PASTEBOARD PACKAGE OF FRENCH PERCUSSION CAPS

Here is a very nice French pasteboard percussion cap container, unopened and full of caps. Round package made of white pasteboard with green paper labels affixed. A white paper label was pasted along… (1212-210). Learn More »

THUER’S PATENT .36 CALIBER “POCKET NAVY” CARTRIDGE

THUER’S PATENT .36 CALIBER “POCKET NAVY” CARTRIDGE

This is a Thuer’s Patent metallic centerfire cartridge. This short .36 caliber cartridge is in excellent original condition and was for the Colt Thuer conversion “Pocket Navy” revolver. These… (1212-24). Learn More »

REPRODUCTION SET OF CRISPIN CARTRIDGES

REPRODUCTION SET OF CRISPIN CARTRIDGES

This is a cased display set of reproduction Crispin cartridges as given out at the 2005 California Cartridge Collectors Show. Foam-filled plastic case holds five different Crispin cartridges made for… (1212-251). Learn More »

VERY RARE .36 CALIBER SMITH “RUBBER CASE” CARTRIDGE

VERY RARE .36 CALIBER SMITH “RUBBER CASE” CARTRIDGE

Gilbert Smith of Buttermilk Falls, NY, received patent #17,702 in June of 1857 for his invention of a cartridge case made of India rubber. All should be familiar with the .50 caliber Smith carbine… (1212-181). Learn More »

90-BORE (~.36 CALIBER) SHARPS “SPORTING RIFLE” CARTRIDGE

90-BORE (~.36 CALIBER) SHARPS “SPORTING RIFLE” CARTRIDGE

This style of cartridge was originally made prior to the Civil War and eventually replaced in the North by the “New Model” linen cartridges. However, the simple method of just tying the plain… (1212-87). Learn More »

60-BORE (~.44 CALIBER) SHARPS CARTRIDGE, GOMEZ & MILLS PATENT

60-BORE (~.44 CALIBER) SHARPS CARTRIDGE, GOMEZ & MILLS PATENT

Here is a very rare 60-Bore Sharps cartridge with a multi-groove bullet by Gomez and Mills. This cartridge is in fine condition. The paper is crisp, and you can clearly see where another cartridge… (1212-85). Learn More »

VERY RARE .36 CALIBER MARSTON PISTOL CARTRIDGE

VERY RARE .36 CALIBER MARSTON PISTOL CARTRIDGE

U.S. patent #8956 was granted to William W. Marston & Frederick Goodell on May 18, 1852 for this cartridge. It was intended to be used in a breech-loading single shot firearm of Marston's design,… (1212-226). Learn More »

VERY RARE .36 CALIBER SAVAGE “SKIN” CARTRIDGE

VERY RARE .36 CALIBER SAVAGE “SKIN” CARTRIDGE

Scarce .36 caliber Savage cartridge for Navy revolvers. Here is a cartridge that is rarely offered for sale in this fine condition. This style of cartridge was made by D.C. Sage of Middletown, CT.… (1212-114). Learn More »

COPY OF “ELEY CARTIDGES” FROM THE LIBRARY OF THE LATE DEAN S. THOMAS

COPY OF “ELEY CARTIDGES” FROM THE LIBRARY OF THE LATE DEAN S. THOMAS

The full title of this volume is “ELEY CARTRIDGES: A HISTORY OF THE SILVERSMITHS AND AMMUNITION MANUFACTURERS” by C. W. Harding and published by Quiller Press of Wykey, Shrewsbury, England in… (236-469). Learn More »

ELEGANT DOUBLE COMPARTMENT PISTOL POWDER FLASK

ELEGANT DOUBLE COMPARTMENT PISTOL POWDER FLASK

This small pistol flask is embossed with an attractive pair of oak leaf and acorn clusters in the top quarter, below which a long, thin, scrolling chevron with dots separates it from a pair of knotted… (490-5380). Learn More »

1849 DATED MEXICAN WAR ERA BATTY “PEACE” POWDER FLASK

1849 DATED MEXICAN WAR ERA BATTY “PEACE” POWDER FLASK

Brass powder flask in good condition. The body has one small ding at bottom with a small seam opening. The decoration on the flask consists of a spread-winged eagle above a circle of 20 five-pointed… (160-170). Learn More »

SMALL BRASS POWDER FLASK

SMALL BRASS POWDER FLASK

This small brass powder flask is decorated with a stamped design of a pheasant in amongst some cattails and weeds. Decoration is present on both sides of the flask. Flask meas. approx. 3.50 inches… (160-167). Learn More »

IRON ROUND BALL MOLD WITH WIPER & “RAMROD”

IRON ROUND BALL MOLD WITH WIPER & “RAMROD”

Small iron scissor-type mold with sprue cutter between both handles. At the end of one handle is a cork screw-like “wiper” and a flat “ramrod” on the end of the other. Measures approximately… (1146-126). Learn More »

SMALL PISTOL POWDER FLASK

SMALL PISTOL POWDER FLASK

This is very small powder flask, possibly of European manufacture and perhaps made on contract for an American retailer, intended for a pocket revolver or small single shot pistol. Measures… (490-5248). Learn More »

SMALL PISTOL POWDER FLASK

SMALL PISTOL POWDER FLASK

This is very small powder flask, possibly of European manufacture and perhaps made on contract for an American retailer, intended for a pocket revolver or small single shot pistol. Measures… (490-5247). Learn More »

ORIGINAL THREE-PIECE STEEL CLEANING ROD FOR THE U.S. SPRINGFIELD MODEL KRAG RIFLE OR CARBINE

ORIGINAL THREE-PIECE STEEL CLEANING ROD FOR THE U.S. SPRINGFIELD MODEL KRAG RIFLE OR CARBINE

The first rods for Krag carbines were two-piece. The three-piece rods were introduced in 1896 and the carrying compartment in the buttstock of the rifle and carbine were accordingly altered to carry… (2022-1783). Learn More »

PLAIN POWDER FLASK FOR REVOLVERS

PLAIN POWDER FLASK FOR REVOLVERS

This flask is for early pocket model revolvers. Constructed with a copper body, with brass top and spout. Measures approximately 4.75” tall x 2” at widest point. Both sides are plain. Thumb tab… (490-5245). Learn More »

BULLET MOLD FOR .31 CALIBER REVOLVER

BULLET MOLD FOR .31 CALIBER REVOLVER

Iron, two cavity bullet mold for the .31 caliber revolver. It casts one round ball and one elongated bullet. There is no sprue cutter. Cavities remain clean and crisp. There are several small dings on… (490-4365). Learn More »

BULLET MOLD FOR .31 CALIBER REVOLVER

BULLET MOLD FOR .31 CALIBER REVOLVER

Iron, two cavity bullet mold for the .31 caliber revolver. It casts one round ball and one elongated bullet. There is no sprue cutter. There are several small dings on exterior where the mold needed… (490-4364). Learn More »


Showing 61 to 80 out of 114

featured item

1847 CONGRESSIONAL RESOLUTIONS OF THANKS TO GEN. ZACHARY TAYLOR AND HIS OFFICERS AND MEN FOR MONTERREY, PERSONALLY DISPATCHED BY PRESIDENT POLK

Zachary Taylor received the formal thanks of Congress three times, along with gold medals, for victories in the Mexican War, the largest number of such resolutions and awards made by Congress to anyone. This is an official State Department copy on… (766-938). Learn More »

Upcoming Events

29
Apr

May 16 - 18: N-SSA Spring Nationals, Fort Shenandoah, Winchester, VA Learn More »

Instagram