Buckles/Plates

Showing 41 to 60 out of 117


1839 PATTERN U.S. INFANTRY WAIST BELT PLATE ON A WHITE BUFF LEATHER BELT

1839 PATTERN U.S. INFANTRY WAIST BELT PLATE ON A WHITE BUFF LEATHER BELT

Standard issue 1839 pattern enlistedman’s white buff leather belt with a typical, large US buckle. The belt is 1.75” wide and approximately 38” long. The leather shows light use, with the… (490-7405). Learn More »

MODEL 1851 NCO WAIST BELT WITH BELT PLATE

MODEL 1851 NCO WAIST BELT WITH BELT PLATE

Civil War era non-commissioned officer’s belt buckle on original bridle leather waist belt. Cast brass eagle buckle which has a one-piece applied German silver wreath and has the narrow 0.5” wide… (490-7404). Learn More »

M1851 ENLISTED MAN’S SWORD BELT - KNOX FAMILY, FREDERICKSBURG, VA

M1851 ENLISTED MAN’S SWORD BELT - KNOX FAMILY, FREDERICKSBURG, VA

This model 1851 enlisted man’s sword belt came from the collection of Civil War relics and family mementos retained by the Knox family of Fredericksburg, VA. The family was large, prosperous, and… (1262-01). Learn More »

RARE WHEN ON LEATHER (COMMON) CONFEDERATE "WISHBONE" BUCKLE

RARE WHEN ON LEATHER (COMMON) CONFEDERATE "WISHBONE" BUCKLE

Our Mr. Steven Roger's writes, "One of the more distinctive Confederate belt buckles is the frame pattern with a movable spit tongue sometimes called the “forked tongue” or “wishbone” pattern.… (1268-017). Learn More »

$6,500.00
ON HOLD

FRENCH HORSE ARTILLERY 3-PIECE BELT PLATE

FRENCH HORSE ARTILLERY 3-PIECE BELT PLATE

This silver(ed) bronze buckle is the rare "Modèle d'août 1830" a design created during "The July Monarchy". In 1830, the discontent caused by Charles X’s authoritarian policies culminated in an… (2025-959). Learn More »

BRITISH STERLING SILVER ROYAL HOUSEHOLD OR LIVERY SWORD BELT PLATE

BRITISH STERLING SILVER ROYAL HOUSEHOLD OR LIVERY SWORD BELT PLATE

Made for a uniformed Royal servant of King George III by Peter Carter of London, England in 1794. The plate is beautifully hand engraved with the Order of the Garter and motto: "HONI SOIT QUI MALY… (2025-845). Learn More »

MARYLAND SWORD BELT PLATE

MARYLAND SWORD BELT PLATE

These plates follow the general configuration of the U.S. M1851, but substitute the 1854 version of the Great Seal of Maryland, simply moving the motto from a ribbon scroll at the bottom to the top of… (2025-767). Learn More »

EAST WOODS ANTIETAM RECOVERED M1855 RIFLEMAN’S BELT BUCKLE AND LOOPS

EAST WOODS ANTIETAM RECOVERED M1855 RIFLEMAN’S BELT BUCKLE AND LOOPS

This brass hardware from an 1855 pattern rifleman’s was recovered in the East Woods on the battlefield of Antietam. These belts were copies of the French 1847 pattern for the “Chasseurs a Pied,”… (490-7363). Learn More »

$395.00
ON HOLD

NON-DUG, U.S. PATTERN 1826 EAGLE BREAST PLATE

NON-DUG, U.S. PATTERN 1826 EAGLE BREAST PLATE

This US shoulder belt plate was to be affixed to the front of the shoulder belt for the infantry cartridge box. It features a brass face featuring a raised spread-winged eagle design. Brass face shows… (2025-805). Learn More »

POST-CIVIL WAR OHIO SWORD BELT PLATE

POST-CIVIL WAR OHIO SWORD BELT PLATE

The plate is cast brass and rectangular in shape with the Ohio coat of arms at center. The detail of the mountains with the rising sun and the canal boat are excellent. Surrounding this central design… (2025-800). Learn More »

MAINE VOLUNTEER MILITIA CARTRIDGE BOX PLATE

MAINE VOLUNTEER MILITIA CARTRIDGE BOX PLATE

This is an excavated VMM box plate. These plates were patterned after the U.S. box plate, but were stamped VMM for Volunteer Militia of Maine, and are thought to have been issued to Maine’s ten… (2025-762). Learn More »

PHILADELPHIA FIRE ZOUAVES TWO-PIECE “P.F.Z.” BELT PLATE

PHILADELPHIA FIRE ZOUAVES TWO-PIECE “P.F.Z.” BELT PLATE

This is a cast brass, two-piece waist belt plate for a Pennsylvania militia unit. Very decorative plate with diagonal lines on the belt loops and wreath surrounding the central disk. That disk has… (2025-775). Learn More »

U.S. M1826 SHOULDER BELT PLATE RECOVERED BY SYD KERKSIS IN DECEMBER  1955 IN THE LINES OF THE 2nd DIVISION 15th CORPS AT PICKETT’S MILL: ATLANTA CAMPAIGN

U.S. M1826 SHOULDER BELT PLATE RECOVERED BY SYD KERKSIS IN DECEMBER 1955 IN THE LINES OF THE 2nd DIVISION 15th CORPS AT PICKETT’S MILL: ATLANTA CAMPAIGN

This plate comes with its original collection envelope with notations on its provenance by Syd Kerksis, noted early collector and author. Pickett’s Mill was fought on May 27, 1864, in the Atlanta… (2025-785). Learn More »

DINGEE MARKED ROUND EAGLE CARTRIDGE BOX SHOULDER BELT PLATE FROM DALTON/ROCKY FACE RIDGE, EX-KERKSIS

DINGEE MARKED ROUND EAGLE CARTRIDGE BOX SHOULDER BELT PLATE FROM DALTON/ROCKY FACE RIDGE, EX-KERKSIS

This regulation belt plate for the infantry cartridge box sling was in the collection of Syd Kerksis, well-known and respected early collector and author and comes with his annotated envelope… (2025-787). Learn More »

CIVIL WAR BELT WITH PATTERN 1851 NCO BUCKLE

CIVIL WAR BELT WITH PATTERN 1851 NCO BUCKLE

This is an old, but non-regulation belt in good condition. Belt is well worn and has tooled edges. The brass adjuster hook has iron rivets. Belt measures approximately 31” long as it is currently… (1268-1026). Learn More »

W.H. SMITH MARKED US CARTRIDGE BOX PLATE RECOVERED BY SYD KERKSIS AT MYER’S HILL SPOTSYLVANIA IN DECEMBER 1955

W.H. SMITH MARKED US CARTRIDGE BOX PLATE RECOVERED BY SYD KERKSIS AT MYER’S HILL SPOTSYLVANIA IN DECEMBER 1955

This maker-marked cartridge box plate was found at Myer’s Hill, the scene of fighting on May 14 at Spotsylvania as Grant tried to strike the right of the Confederate line, but poor roads delayed his… (2025-786). Learn More »

NON-DUG “THIN LETTER” STATE OF NEW YORK BELT PLATE

NON-DUG “THIN LETTER” STATE OF NEW YORK BELT PLATE

This is a match for O’Donnell & Campbell Plate 549 in very good condition. This has good definition to the letters and raised rims on the edge, traces of thin, faded gilt some recesses, but… (490-7273). Learn More »

SCARCE MEDIUM SIZE OVAL U.S. PLATE

SCARCE MEDIUM SIZE OVAL U.S. PLATE

This is a match for O’Donnell and Campbell Plate 516, one of two plates (along with #514) they attribute to early-war state contracts for volunteers that fall between the large and small size US… (490-7286). Learn More »

POST CIVIL WAR CA. 1875-1890 VIRGINIA OFFICER’S BELT PLATE

POST CIVIL WAR CA. 1875-1890 VIRGINIA OFFICER’S BELT PLATE

This plate bears a superficial similarity to the wartime rectangular Virginia sword belt plates using the Virginia seal in the raised oval with motto like Mullinax (1991) 393 or the panel plates with… (1287-02). Learn More »

MILITIA OFFICER’S SWORD BELT AND TWO-PIECE EAGLE PLATE CA 1855-1860

MILITIA OFFICER’S SWORD BELT AND TWO-PIECE EAGLE PLATE CA 1855-1860

This is very similar to O’Donnell and Campbell Plate 296, which they date 1855 to 1860 and attribute to an “1850’s trend toward the mass production of inexpensive plates to satisfy the demands… (362-1208). Learn More »


Showing 41 to 60 out of 117