site search
online catalog
Leather
Showing 21 to 40 out of 146
PUNCH DECORATED 1820-1840 US MILITIA CARTRIDGE BOX
A very nice example of a US militia cartridge box with wood block bored for 24 cartridges, the standard and specified minimum load under the militia act, and set up for wear on a waist belt with two… (1202-489). Learn More »
$695.00
ON HOLD
ALLEGHENY ARSENAL MODEL 1851 WAIST BELT & BUCKLE WITH ARTILLERY SHORT SWORD FROG
This is a very nice Civil War artilleryman’s waist belt and buckle with a frog for the 1832 short artillery sword that shows actual use. The cast brass eagle buckle has a three-piece applied German… (1286-611). Learn More »
CIVIL WAR OFFICER’S SWORD BELT WITH BELT BUCKLE AND STRAPS
This is an officer’s sword belt rig in good condition. Belt is constructed of folded leather that is stitched. Nice double-line stitching along outer edges on the belt. Belt leather measures… (1268-274). Learn More »
MINTY LIGHT ARTILLERY M1851 BUFF LEATHER SWORD BELT
This unissued, buff leather, Model-1851 sword belt comes complete with sword hangers and all matching brass hardware. This “artillery” belt was never intended to have the shoulder strap. The belt… (1268-609). Learn More »
CONFEDERATE OFFICER’S BELT WITH TWO-PIECE VIRGINIA PLATE AND DRAGOON REVOLVER HOLSTER
The belt plate is a Viriginia two-piece interlocking plate of very good quality. Belt loops for tongue and wreath are plain, slightly beveled. The wreath is a laurel wreath with berries, secured with… (1283-03). Learn More »
US PATTERN 1839 BELT PLATE WITH BELT
This non-excavated Federal belt plate is of the regulation 1839 pattern. Constructed in the die-struck and rolled brass method, the brass accoutrement’s face shows a clear “US”. Face shows only… (1268-219). Learn More »
$475.00
ON HOLD
NICE COMPLETE MAKER-MARKED CIVIL WAR PERCUSSION CAP POUCH
This is a complete percussion cap pouch. The leather is clean and the whole piece is in very good overall condition. There is some crazing to the finish on the outer flap. This flap features an oval… (1268-219A). Learn More »
$295.00
SOLD
VERY SCARCE CONFEDERATE SWORD BELT WITH VIRGINIA BUCKLE
This buff leather, Model-1851 sword belt comes complete with sword hangers (one detached but present), all brass hardware, and a very fine Virginia State Seal belt plate. No shoulder strap… (1268-357). Learn More »
M1851 BUFF LEATHER SWORD BELT -- COMPLETE
This buff leather, Model-1851 sword belt comes complete with sword hangers, shoulder attachment (Sam Brown strap), and all matching brass hardware. The belt shows some evidence of use with a "rubbed"… (1268-756). Learn More »
$1,100.00
ON HOLD
CONFEDERATE PERCUSSION CAP POUCH
This is a Confederate-made percussion cap pouch. The leather is in very good overall condition. This pattern has the "square" outer flap with closing tab sewn to the underside. The latch tab is broken… (1268-357A). Learn More »
$1,250.00
SOLD
LEATHER CAVALRY CARBINE SLING & SNAP HOOK
This is a Cavalry shoulder sling designed for use with weapons fitted with sling rings (musketoon, rifled carbine, and all patented breech-loading carbines). The sling was to be worn over the left… (1268-756D). Learn More »
$895.00
SOLD
NICE COLT M1848 DRAGOON HOLSTER
The M1848 Dragoon was slightly lighter than the previous Walker. However, the Ordnance Department believed it was still too large, heavy and awkward to be carried in anything but pommel holsters. This… (1268-756B). Learn More »
$895.00
ON HOLD
P1851 NCO SWORD BELT WITH SHOULDER STRAP – W. KINSEY MAKER MARKED
This is a non-commissioned officer’s sword belt in good condition. Belt is constructed of heavy buff leather that has given to a deep brown color throughout. As it is currently configured, the belt… (2025-197). Learn More »
ONE-PIECE “SLIM JIM” HOLSTER – EX-TEXAS MUSEUM COLLECTION
This is a brown leather “Slim Jim” holster for M1851, M1861 Colt Navy, and subsequent conversions. Holster body is one piece, joined by a single seam stitch along the rear. Stitching remains… (1179-700B). Learn More »
CIVIL WAR OFFICER’S HAVERSACK
This Civil War artifact is an original, leather haversack typical of the accoutrements carried by officers, both Confederate and Federal, while they were in the field. A private purchase, this large,… (1268-277). Learn More »
MODEL 1839 CARTRIDGE BOX FOR MISSISSIPPI RIFLES, “C.S. STORMS”
Here is a good example of a Model 1839 leather cartridge box for the M1841 Mississippi rifle. Constructed from heavy black bridle leather, this box measures 6.5” across, 4” high, and is 1.75”… (1268-159). Learn More »
INDIAN WARS NEW YORK HAGNER PATTERN 1872 BELT PLATE
About 1880 New York adopted a version the US M1872 belt plate substituting “NY” for “US” for garrison and dress wear. These are sometimes referred to as the Hagner pattern, having been first… (1216-195). Learn More »
.45/70 McKEEVER CARTRIDGE BOX MARKED “U.S.M.C”
This is a “McKeever” style cartridge box. Complete and original and in solid condition. Black leather box “hinged” at the bottom with a brass rod. Leather closure tab fastens to brass finial… (172-5459). Learn More »
$550.00
Originally $695.00
ON HOLD
HOLSTER FOR A FIVE-INCH COLT POCKET REVOLVER
This is a brown leather belt holster in good condition for a Colt .32 caliber percussion pocket revolver with a 5-inch barrel. The holster is a simple three-piece construction of the body and flap in… (172-5400). Learn More »
$375.00
Originally $475.00
TOOLED LEATHER MODEL 1851/1861 NAVY SIZE REVOLVER HOLSTER
Several holsters of this configuration for navy size revolvers are illustrated in Meadows and are seen in period photos. They key point of identification is the use of an elongated flap extending in… (172-5395). Learn More »
$650.00
Originally $825.00
Showing 21 to 40 out of 146
Most Popular
Historical Firearms Stolen From The National Civil War Museum In Harrisburg, Pa »
Theft From Gravesite Of Gen. John Reynolds »
Selection Of Unframed Prints By Don Troiani »
Fine Condition Brass Infantry Bugle Insignia »
British Imported, Confederate Used Bayonet »
Scarce New Model 1865 Sharps Still In Percussion Near Factory New »
featured item
NON-REGULATION SNARE DRUM WITH STICKS, SLING & PLATE -- ID’D TO 34TH NEW YORK DRUMMER
This is constructed in the standard fashion, with a wood body fastened at the overlapping seam by brass tacks arranged in circular patterns around the vent hole. The maple shell measures 17” in diameter and 17.25” tall. Shell is unpainted and… (1268-165). Learn More »
site search
