Showing 1 to 50 out of 321
This excavated two-piece coat button was used by Confederate cavalrymen. Button is in good “dug” condition. The face has a fine black and brown patina with a bold and lined “C” standing out.… (2026-91). Learn More »
This excavated two-piece button was used by Confederate artillerymen. Button is in good “dug” condition. The copper face has a fine dark patina with a bold “A” standing out. Tin back has one… (2026-90). Learn More »
This is an excavated two-piece coat button. Button is in “dug” condition with a dent on one edge. The face features a large central star with an “I” in the center. Surrounding the star are all… (2026-89). Learn More »
According to Peter George, co-author of Field Artillery Projectiles of the American Civil War, "this shell is extremely rare as very few have been recovered". He also mentioned that "this specific… (2026-551). Learn More »
$975.00
SOLD
Known as the Whitworth pattern I, sub-pattern II, explosive shell. This hexagonal spiral rifled artillery projectile was of Sir Joseph Whitworth’s design and is of English manufacture. These… (2026-533). Learn More »
These two cotton fragments, red and blue, are accompanied by a remarkable note. The note lays out the significance of the fragments, explaining that they were taken from a U.S. flag found on the… (2026-40). Learn More »
$1,250.00
SOLD
“Pronounced Serif” two-piece CS buckles take their name from the large, not to say exaggerated, serifs at the top of the “C” and at the top and bottom of the “S” on the tongue. They are… (2025-3581). Learn More »
$1,695.00
SOLD
Here is an early souvenir walking cane made from two pieces of battlefield wood! The long shaft was a sapling cut from the area around Meade’s headquarters. The turned hardwood handle top containing… (1202-1159). Learn More »
$1,695.00
SOLD
This US shoulder belt plate was affixed to the front of the shoulder belt for the infantry cartridge box. It features the spread-winged eagle design. Brass face retains fine detail. Even dark brown… (1032-256). Learn More »
This US shoulder belt plate was affixed to the front of the shoulder belt for the infantry cartridge box. It features the spread-winged eagle design. Brass face is smooth and retains fine detail. Even… (1032-255). Learn More »
This US shoulder belt plate was affixed to the front of the shoulder belt for the infantry cartridge box. It features the spread-winged eagle design. Brass face is smooth and retains fine detail. Even… (1032-250). Learn More »
This 6.25” x 5.25” display case contains a nice group of relics reportedly found near Brandy Station, Virginia. Relics include a 2.25” diameter rosette (brass face with tin back), two Sharps… (2023-2908). Learn More »
$125.00
SOLD
This Model 1835/42 Bayonet and P1859 Scabbard were part of the relic collections in G.A.R. (Grand Army of the Republic) Post #551. This was the Peter Miller Post in York Springs, Pennsylvania. Named… (1202-1050). Learn More »
This regulation US Civil War belt plate comes with Syd Kerksis’ original collection envelope with notations indicating he found it in August 1958 at “Topotomoe” or “Topotomoi” Creek, which… (2025-1888). Learn More »
$595.00
ON HOLD
This is a very good excavated condition M1839 cartridge box plate recovered by pioneer relic hunter, scholar, and author Syd Kerksis, that is still in his collection envelope documenting its recovery… (2025-186). Learn More »
$495.00
ON HOLD
A very nice "dug" plate with both wire loops intact on reverse. Nice smooth chocolate patina to face, nice detail to the eagle. Minor ding along upper edge to left of the eagle’s head, slightly… (2026-353). Learn More »
$150.00
ON HOLD
Very good condition slave trade button made of pewter, bearing on the face “T. Porter,” the mark of Thomas Porter II (1790-1857), with a manufacturer’s mark on reverse, which is somewhat… (2026-336). Learn More »
This is a relic condition U.S. waist belt plate. This is the regulation 1839 pattern plate used throughout the war and bears the marking on the back of W.H. Smith of Brooklyn, a major supplier of… (2026-697). Learn More »
$195.00
SOLD
This is a terrific old battlefield “pick-up” relic from a local G.A.R. veterans’ post. The P1853 Enfield socket bayonet is in early battlefield pick-up condition with a dark brown tone and light… (1202-510). Learn More »
This relic board is very like those assembled from Gettysburg relics by John Rosensteel and displayed on the porch of the Round Top Museum, but differs in displaying the relics on horizontal rather… (1242-06). Learn More »
$2,800.00
Originally $3,000.00
This is a terrific old battlefield “pick-up” Civil War enlisted belt and buckle. Leather belt is in fair condition for a “relic.” Leather is crinkled, dried, and shows “shrinkage” with… (1202-1025). Learn More »
Here is an early souvenir walking cane made of sapling taken from the famous Gettysburg battlefield area of Pickett’s Charge. This wooden cane measures about 36" long. The handle area retains 10”… (2025-538). Learn More »
$495.00
ON HOLD
Fixed-tongue frame buckles were simple in design, strong, lightweight, easy to cast and finish, and were widely produced throughout the south. This frame of this version has is cast with a channel in… (2025-3580). Learn More »
The most widely used Confederate fuse plugs were the copper time fuse adapters with two spanner holes in the head. These fuse adapters came in various lengths and head diameters. This long style was… (2025-1670). Learn More »
Zinc Parrott (long) fuse adapter measuring approximately 2.5” long. From a fired shell. Head is flanged with spanner holes and measures about 1.25” in diameter. Some deterioration around the edge… (2025-1669). Learn More »
Brass Hotchkiss fuse adapter measuring approximately 2.25” long. From a fired shell. Head is flanged with a screwdriver slot and measures about 1.2” in diameter. Threads run about 1/2” down the… (2025-1666). Learn More »
This regulation belt plate for the cartridge box sling comes with its original collection envelope annotated by Syd Kerkis, the well-known and respected early relic hunter, collector and author,… (2026-568). Learn More »
$525.00
ON HOLD
This regulation US Civil War belt plate comes with Syd Kerksis’ original collection envelope with notations indicating he found it in April 1955 at Cold Harbor in the lines held by Barlow’s… (2026-567). Learn More »
$595.00
ON HOLD
Very good condition slave trade button made of copper alloy, bearing on the face “TP,” the mark of Thomas Porter II (1790-1857), with a manufacturer’s “quality” mark on reverse. This… (2026-335). Learn More »
Primitive, but cheap and easily made, pikes were recognized as a stop-gap measure until better arms could be obtained and were made throughout the south by small and large manufacturers with various… (2025-3625). Learn More »
Offered here is an interesting relic recovered out of the river at City Point, VA. Leather belt measures approximately 35” long x 1.75” wide. Many well-used holes from when a belt plate was… (2023-3169). Learn More »
This regulation plate comes with Syd Kerksis’ original collection envelope with notations at top indicating he found it at Hamilton Crossing in 1960 (with about half the staff here reading his month… (2026-451). Learn More »
Relics are displayed in very nice wood case (9.5” x 6.5”). Relics were recovered along the Baltimore Pike between that road and the Spangler’s Spring/Culp’s Hill area by author/publisher Dean… (236-1191). Learn More »
This is the most common solid shot projectile of any caliber used during the Civil War by both the Federal and Confederate forces. This is a solid iron cannon ball with dark brown tone and bubble… (557-16). Learn More »
This incomplete relic condition carbine cartridge box is an original example of the classic leather accoutrement carried by Federal mounted forces during the Civil War. We believe this is the pattern… (2025-2023). Learn More »
This hardware grouping corresponded to a Pattern 1855 Rifleman’s Belt, adopted prior to the Civil War for issuance to rifle-equipped regular US infantry and in select use through the Civil… (224-767). Learn More »
This “dug” Federal cartridge box plate is of the regulation 1839. Constructed in the die-struck and rolled brass method, the brass accoutrement’s face shows a clear “US” with nice smooth… (1032-240). Learn More »
This “dug” Federal cartridge box plate is of the regulation 1839. Constructed in the die-struck and rolled brass method, the brass accoutrement’s face shows a clear “US” with nice smooth… (1032-241). Learn More »
This relic was recovered by famed relic hunter Ken Bream from private property near Culp’s Hill at an unknown date, and purchased from the 2021 auction of his collection. This item was from Lot#… (224-753). Learn More »
This “dug” Federal cartridge box plate is of the regulation 1839. Constructed in the die-struck and rolled brass method, the brass accoutrement’s face shows a clear “US” with nice smooth… (1032-239). Learn More »
The brick in this set measures 1 ¼” x 1 ¼” x 1/4'’ and was taken from the bricks that were knocked down by an artillery shell during the battle of Gettysburg. This hole in the wall was also… (2025-2169). Learn More »
$95.00
ON HOLD
Excavated brass cape pin and chain. Although not actually a “pin,” a chain connected two such pieces and was run through button holes to hold a cape closed. These are found in various shapes… (2022-1349). Learn More »
$395.00
Originally $595.00
This Federal shoulder belt plate is of the regulation 1826 pattern. Constructed in the die-struck and rolled brass method, the brass accoutrement’s face shows a clear eagle in the center. Face has a… (2022-1849). Learn More »
$225.00
Originally $295.00
Bayonet is full length but is rusted throughout. Bayonet appears to have been painted black once to slow down the rust but that is now chipping off in areas. [ad]… (2022-1316). Learn More »
$100.00
Originally $125.00
Bayonet has full length blade and socket with mortise. Locking ring is frozen. No markings are visible. Surfaces are covered in a heavy rust with remains of black paint. It appears that once the… (2022-1319). Learn More »
$100.00
Originally $125.00
SOLD
“Dug” US cartridge box plate for the outer flap of the infantry cartridge pouch. Large “US” in the center of the plate. The face remains smooth with a fine dark patina. There are some dings… (2025-3154). Learn More »
Browned (faded from original dark blue) wool broadcloth body over buckram; leather visor and bound brim; black leather chinstrap with small rectangular buckle; gilt staff‑officer eagle buttons… (2025-3682). Learn More »
This big bullet is a Northern arsenal-made bullet. Literally “pressed and turned” on a bullet machine where a slug of lead was cut, pressed in a die to form the nose and cavity, then turned on a… (2024-981). Learn More »
This bullet is a nose cast, Southern-made bullet. Basically, a typical grooved minie ball in .58 caliber with a pronounced teat in the cavity. In this case, the mold used to cast the usual three… (2024-970). Learn More »
The first railroad track widely laid in the United States was made of wooden stringers, running in the direction of travel, with a flat iron bar fastened to the top, called strap iron. This served… (84-97). Learn More »
Showing 1 to 50 out of 321
Historical Firearms Stolen From The National Civil War Museum In Harrisburg, Pa »
Theft From Gravesite Of Gen. John Reynolds »
Selection Of Unframed Prints By Don Troiani »
Fine Condition Brass Infantry Bugle Insignia »
John Fowler Rusling (1834-1918) served in the 5th New Jersey Infantry and the Second New Jersey Brigade before moving up to posts at the division and higher levels in the Army of the Potomac and then in the Department of the Cumberland, rising from… (2024-1173). Learn More »