Showing 51 to 100 out of 120
Made for a uniformed Royal servant of King George III by Peter Carter of London, England in 1794. The plate is beautifully hand engraved with the Order of the Garter and motto: "HONI SOIT QUI MALY… (2025-845). Learn More »
These plates follow the general configuration of the U.S. M1851, but substitute the 1854 version of the Great Seal of Maryland, simply moving the motto from a ribbon scroll at the bottom to the top of… (2025-767). Learn More »
This brass hardware from an 1855 pattern rifleman’s was recovered in the East Woods on the battlefield of Antietam. These belts were copies of the French 1847 pattern for the “Chasseurs a Pied,”… (490-7363). Learn More »
$395.00
ON HOLD
This US shoulder belt plate was to be affixed to the front of the shoulder belt for the infantry cartridge box. It features a brass face featuring a raised spread-winged eagle design. Brass face shows… (2025-805). Learn More »
The plate is cast brass and rectangular in shape with the Ohio coat of arms at center. The detail of the mountains with the rising sun and the canal boat are excellent. Surrounding this central design… (2025-800). Learn More »
This is an excavated VMM box plate. These plates were patterned after the U.S. box plate, but were stamped VMM for Volunteer Militia of Maine, and are thought to have been issued to Maine’s ten… (2025-762). Learn More »
This is a cast brass, two-piece waist belt plate for a Pennsylvania militia unit. Very decorative plate with diagonal lines on the belt loops and wreath surrounding the central disk. That disk has… (2025-775). Learn More »
This plate comes with its original collection envelope with notations on its provenance by Syd Kerksis, noted early collector and author. Pickett’s Mill was fought on May 27, 1864, in the Atlanta… (2025-785). Learn More »
This regulation belt plate for the infantry cartridge box sling was in the collection of Syd Kerksis, well-known and respected early collector and author and comes with his annotated envelope… (2025-787). Learn More »
This is an old, but non-regulation belt in good condition. Belt is well worn and has tooled edges. The brass adjuster hook has iron rivets. Belt measures approximately 31” long as it is currently… (1268-1026). Learn More »
This maker-marked cartridge box plate was found at Myer’s Hill, the scene of fighting on May 14 at Spotsylvania as Grant tried to strike the right of the Confederate line, but poor roads delayed his… (2025-786). Learn More »
This is a match for O’Donnell & Campbell Plate 549 in very good condition. This has good definition to the letters and raised rims on the edge, traces of thin, faded gilt some recesses, but… (490-7273). Learn More »
This is a match for O’Donnell and Campbell Plate 516, one of two plates (along with #514) they attribute to early-war state contracts for volunteers that fall between the large and small size US… (490-7286). Learn More »
This plate bears a superficial similarity to the wartime rectangular Virginia sword belt plates using the Virginia seal in the raised oval with motto like Mullinax (1991) 393 or the panel plates with… (1287-02). Learn More »
This is very similar to O’Donnell and Campbell Plate 296, which they date 1855 to 1860 and attribute to an “1850’s trend toward the mass production of inexpensive plates to satisfy the demands… (362-1208). Learn More »
If you want "The Look" in a Confederate belt plate that was born on its original leather here you have it. The CS belt plate itself is the oval "egg shaped" stamped brass type. It has on the back… (1268-505). Learn More »
This is a match for O’Donnell & Campbell Plate 550 in very good condition, with good edge, nice bright patina, showing some original gilt and some minor age stains, and a full lead solder fill… (490-7276). Learn More »
Modelled on the US 1826 pattern round eagle breastplates, these are shown as Plate 471 in O’Donnell and Campbell. They are described in the state’s 1859 regulations and bear the coat of arms later… (1287-06). Learn More »
This is a very nice Civil War artilleryman’s waist belt and buckle with a frog for the 1832 short artillery sword that shows actual use. The cast brass eagle buckle has a three-piece applied German… (1286-611). Learn More »
This is an officer’s sword belt rig in good condition. Belt is constructed of folded leather that is stitched. Nice double-line stitching along outer edges on the belt. Belt leather measures… (1268-274). Learn More »
This unissued, buff leather, Model-1851 sword belt comes complete with sword hangers and all matching brass hardware. This “artillery” belt was never intended to have the shoulder strap. The belt… (1268-609). Learn More »
The belt plate is a Viriginia two-piece interlocking plate of very good quality. Belt loops for tongue and wreath are plain, slightly beveled. The wreath is a laurel wreath with berries, secured with… (1283-03). Learn More »
This is a non-commissioned officer’s sword belt in good condition. Belt is constructed of heavy buff leather that has given to a deep brown color throughout. As it is currently configured, the belt… (2025-197). Learn More »
Presented here is an excavated “Volunteer Militia of Maine” oval waist belt plate that was issued to the State’s volunteer infantrymen early in the Civil War. Maine formally organized its… (1000-1541). Learn More »
$1,480.00
Originally $1,850.00
About 1880 New York adopted a version the US M1872 belt plate substituting “NY” for “US” for garrison and dress wear. These are sometimes referred to as the Hagner pattern, having been first… (1216-195). Learn More »
The belt plate and buckle pictured here is from mid Civil War, 1862-1864. The eagle plate is an 1851 pattern prevalent in late war enlistees. The design was introduced in 1851 with… (172-3107). Learn More »
$400.00
Originally $495.00
A light weight, die stamped rolled brass belt plate with raised border and script letters “SNY” in the center. See O’Donnell and Campbell Plate 868 for this plate. There are several variations,… (1216-217). Learn More »
Featuring the original gilding on the stamped brass, this is as close to new condition as an item of this age can possibly be. The reverse of the plate features lead filling that has yet to fully… (1121-16). Learn More »
According to famous authors and researchers ‘O’Donnell’ and ‘Campbell’, this style of plate is dated to 1861 and differs slightly from Mexican War era general issue plates in several… (490-7144). Learn More »
This belt plate was manufactured by Emerson Gaylord shortly before the Civil War when some of Baltimore’s uniformed militia companies made a purchase of sword belts carrying these plates. Emerson… (1259-07). Learn More »
These clipped-corner rectangular breast plates with two cannon barrel like tubes were intended to hold a drummer’s drumsticks while mounted to a drummer’s sling. When not in use, the sticks… (490-7162). Learn More »
These belt plates were robust enough to have a long service life even after their official replacement by the 1851 pattern rectangular, eagle belt plate. In Civil War photographs they occasionally… (1256-26). Learn More »
Officer's waist belt of thin leather folded and stitched. Complete with Old English "NY" buckle, sword hangers with spring clips. The belt is about 1.75" wide and solidly stitched. Leather remains… (172-6042). Learn More »
See O’Donnell and Campbell, Plate 592, for a discussion of these plates. The Philadelphia Fire Zouaves were recruited among the city’s fire companies, men renowned for their bravery in entering… (490-6764). Learn More »
This is a very nice early, American-made, set of infantry or militia accoutrements. Set consists of a cartridge box on a waist belt with a sheet brass buckle and a bayonet with scabbard and belt frog… (401-45). Learn More »
$950.00
Originally $1,750.00
ON HOLD
Leather belt is in overall good condition, with some light crazing. Edges have some slight cracks. Belt has a heavy cotton interior with the leather wrapped around, with a hand-sewn horizontal seam on… (2024-1630). Learn More »
These sturdy, cast brass rectangular belt plate with side loop and integral tongue were introduced in 1872 along with the Palmer brace system. That system required additional brass loops placed on the… (2024-713). Learn More »
This sword belt plate, a very good example of an early pick-up, is mounted on a great old card typical of early relic displays labeled in brown ink, “Officers Belt Plate / battlefield of Harpers… (1202-196). Learn More »
This excavated Pattern 1839 US cartridge box shoulder sling plate (Eagle breast plate) has a smooth brown patina. The brass face features an eagle clutching arrows and an olive branch. The plate’s… (490-6828). Learn More »
This excavated Pattern 1839 US cartridge box plate has a smooth brown patina on the face. The oval brass face features a raised “US”. The plate’s reverse has 99% of the lead fill. The two iron… (490-6829). Learn More »
This excavated Pattern 1839 US cartridge box plate has a smooth brown patina on the face. The oval brass face features a raised “US”. The plate’s reverse has 99% of the lead fill. The two iron… (490-6831). Learn More »
Formerly in the Texas Civil War Museum, this is a very good example of a postwar militia belt plate using the star motif. This was suitable for use by a militia unit of any state who might select… (1179-1594). Learn More »
This pattern of belt plate was first adopted in 1826 with hooks on the reverse for the bayonet shoulder belt and made of stamped rolled brass for artillery and white metal for infantry. This was… (490-5799). Learn More »
This regulation belt plate for the cartridge box sling came from the collection of Syd Kerksis, well-known and respected early collector and author, and still has his annotated envelope indicating he… (490-5858). Learn More »
This Pattern 1826 eagle breast plate is meant for use on the baldric of the Model 1840 NCO sword. The face of the plate is in very nice condition showing only minor wear from age and use. The right… (490-5759). Learn More »
This plate comes with its original collection envelope with notations on its provenance by Syd Kerksis, noted early collector and author. Pickett’s Mill was fought on May 27, 1864, in the Atlanta… (490-5779). Learn More »
This regulation US cartridge box plate was recovered on the battlefield of “Tunnel Hill, Ga,” by Syd Kerksis, one of the legendary early relic hunters and collectors, author of books on military… (490-5771). Learn More »
Regulation belt made of blackened buff leather. This pattern belt and japanned iron friction buckle seems to have appeared in 1862. It is specifically detailed as a regulation issue item by the… (1000-576). Learn More »
$1,800.00
Originally $2,250.00
Nice gently used copy of “PLATES AND BUCKLES OF THE AMERICAN MILITARY 1795-1874” by Sydney C. Kerksis. This is a 3rd edition copy printed in 1987 by Stone Mountain Press of Stone Mountain,… (34-156). Learn More »
Belt is made of one piece of leather with the leather from each edge folded toward the middle. Belt meas. approx. 40.25 inches long x 1.75 wide. The interior of the belt has a good straight seam… (1052-236). Learn More »
Showing 51 to 100 out of 120
Historical Firearms Stolen From The National Civil War Museum In Harrisburg, Pa »
Theft From Gravesite Of Gen. John Reynolds »
Selection Of Unframed Prints By Don Troiani »
Fine Condition Brass Infantry Bugle Insignia »
This is a very fine identified Confederate shell jacket, allegedly worn by Private Edwin F. Barnes, 1st Company, Virginia Howitzers, Light Artillery, the famous Richmond Howitzers. Barnes initially enlisted April 1861, in Co. H of the 15th Virginia… (2025-1796). Learn More »