Showing 1 to 50 out of 106
This very nice Model 1860 Staff & Field Officer’s Sword by Bent & Bush, Boston, Mass. It is a very fine example of the pattern. The cast and brass hilt is loaded with original gilt and the… (2025-412). Learn More »
This Model 1850 Foot Officer’s Sword bears an old paper label glued to the scabbard between the upper and middle mounts that is faded, but clearly reads “Sword belonging to/Capt. Julius… (2025-423). Learn More »
$4,750.00
ON HOLD
Cavalry officer’s sabers carried by officers in the light artillery are not uncommon, particularly in volunteer units where regulations might be more loosely applied, and a cavalry officer’s… (490-5267). Learn More »
This sword of the British Pattern of 1822/45 was sold to Maury by the Wilkinson sword cutlers of London, England. At the time he ordered the sword Maury was serving in England as the principal… (1268-684). Learn More »
$55,000.00
SOLD
James E. Emerson of Emerson and Silver really managed to stick it to the Horstmann firm in his testimony to the Holt Owens Commission on Ordnance and Ordnance Stores in 1862, testifying as a… (2025-241). Learn More »
$795.00
ON HOLD
This is a very strong example of the classic Confederate cavalry saber with wood scabbard identified by Albaugh in 1963 as a product of Kraft, Goldschmidt and Kraft of Columbia, SC. Some collectors… (1268-353). Learn More »
This 1859 dated light cavalry saber by Ames is in good condition, with undisturbed hilt with original leather and wire on the grip, a full-length blade with clear maker and inspector marks, and… (362-1262). Learn More »
This eagle-pommel saber bears an etched and gilt maker/retailer address behind the obverse langet: “A,W, SPIES / Warranted.” (The punctuation is clearly commas; the “warranted,” placed at… (362-1260). Learn More »
$850.00
ON HOLD
Offered here is a very good example of a 25” long Robert Mole & Sons produced Confederate Naval Cutlass, marked by Courtney, Tennent & Company with its original scabbard. The blade is… (1268-683). Learn More »
$5,500.00
ON HOLD
Adopted in late 1841, this model cutlass was made by the Ames Manufacturing Company until 1846. In all a total of 6,600 cutlasses were produced. These saw service through the Mexican and Civil Wars.… (1268-675). Learn More »
This 1860-dated Ames light cavalry saber stands a very good chance of having been carried by a Virginia Confederate cavalryman. Of approximately 1,400 made that year and delivered to the U.S.… (362-1263). Learn More »
For details on this company and these sabers see Thillmann, Civil War Cavalry and Artillery Sabers pp.349ff. The M1840 pattern, the so-called heavy cavalry saber to distinguish it from the lighter… (362-1261). Learn More »
This sword has a bright blade that exhibits light scattered mottling and very minor surface pitting in areas. The blade meas. approx. 32.00 inches long and is 1.08 inches wide at the ricasso. The… (2025-388). Learn More »
“Brass mounted regulation swords” are specifically listed among the military goods offered for sale by Hayden and Whilden of Charleston, SC, in an October 1861 advertisement. The firm was… (870-616). Learn More »
$15,000.00
ON HOLD
This sword bears a wonderful inscription to a newly commissioned officer from the men of his company, beside whom he had served as a sergeant through Antietam, Fredericksburg and other heavy… (1052-1130). Learn More »
This 1841 dated Ames Foot Artillery sword has a straight, heavy iron blade. It is double edged and the blade is clean with areas of darker spotting. There are two side-by-side fullers, starting just… (1268-612). Learn More »
$1,750.00
ON HOLD
WHEN ELECTED COLONEL OF THE 28th NC, HIS OLD REGIMENT, THE 1st NC, “PRESENTED HIM WITH A SWORD, SADDLE AND BRIDLE, AND A HANDSOME PAIR OF GOBLETS…” We are proud to offer the sword mentioned in… (846-572). Learn More »
This Federal edged weapon is an Ames Model 1832 U.S. Foot Artilleryman’s short sword in wonderful original condition. Handsome and ruggedly made, this blade specimen is a product of the Ames… (490-919). Learn More »
$2,500.00
Originally $2,950.00
ON HOLD
Here is a very handsome and inscribed, original Model 1850 Officer's Staff and Field imported sword complete with its original metal scabbard. On the scabbard mount of this Civil War edged weapon is a… (490-06). Learn More »
$2,400.00
Originally $2,800.00
This officer’s sword not only bears a presentation inscription on the upper scabbard mount and battle honors on the middle mount, it comes with its original gold bullion officer’s sword knot and… (1052-1134). Learn More »
At top center is a large, full color, spread winged eagle sitting on a reddish brown fascine at the center of a sunburst and gold stars. Due to paint loss some of the stars are missing. The eagle’s… (945-353). Learn More »
$2,500.00
Originally $2,950.00
The drawn sword meas. approx. 35.00 inches long. The plated blade itself meas. approx. 29.75 inches long x 0.75 of an inch wide at the ricasso. It has a central fuller that starts just above the… (150-354). Learn More »
$2,400.00
Originally $3,150.00
This foot artillery sword, or heavy artillery sword, was made by W. J. McElroy in Macon, Georgia. Even though no maker marked examples of this exact type have come to light, both E. J. Johnston and W.… (2025-42). Learn More »
The M-1906 U.S. Cavalry saber is almost exactly like its forefather, the M-1860 Cavalry saber, used throughout the Civil War and on America's frontier during the Indian Wars. It was the last curved… (2023-2220). Learn More »
$550.00
ON HOLD
This is one of Nathan Starr’s improved Model 1812 sabers, also known as the 1812/13 pattern. Starr was burdened with changes to the number ordered by federal government -- from 1,000 to 5,000, and… (299-22). Learn More »
Classic Civil War cavalry saber believed to be made by Gilbert Dubois in Napanoch, New York. Sword is in overall very good condition. Blade exhibits gray tone overall with a few darker patches. No… (870-470). Learn More »
Good condition, militia horseman’s battle saber is an original contract of 1818 piece made by the firm of Nathan Starr of Middletown, Connecticut. Some 10,600 sabers were contracted to Nathan Starr… (299-17). Learn More »
This is an interesting item, being a short ceremonial dress sword or “hanger” modeled after a bayonet. The sword is 23.5” long overall with 19” blade. Grip and cross guard are designed as a… (2021-170). Learn More »
If they gave out awards for crudely made cavalry sabers, this one would be in the running. The guard is simple flat iron, curving in a broad semicircle, with a simple hole in one end through which the… (490-6746). Learn More »
This sword replaced an 1849 pattern, was used by officials in management positions, and is in very good condition, with just the scabbard showing as brown-speckled steel gray. The sword is unmarked,… (721-113). Learn More »
This classic Confederate cavalry saber, a “Kenansville” or “Froelich” in collector terminology, comes from collection of Civil War relics, mementos, and family memorabilia retained until… (1246-09). Learn More »
A Javanese Kris showing a wider blade with fewer curves than some, gray in color, but showing very clearly an attractive watery pattern to the steel. The blade is deeply worked across the broad base.… (490-6917). Learn More »
This exquisite M1840 foot officer’s presentation sword is a true rarity among antebellum and Civil War offerings. The folding side of the guard operates as it should, while the fixed piece is… (1256-220). Learn More »
In 1852, the Navy Department adopted an officer sword which varied slightly from the previous model 1841 Officer’s Sword. The 1852 Navy Regulations described the m1852 Naval Officer’s Sword as a… (2024-1905). Learn More »
The 1832 short sword had been specified for infantry sergeants and musicians as well as enlisted men of foot artillery. With the distribution of the 1840 sword patterns the sergeants and musicians… (2024-1766). Learn More »
This M1850 staff and field officer sword comes beautifully etched and frosted with an ornately adorned scabbard. Etched with the Miller and Company of New York markers markings on the ricasso, the… (766-2033). Learn More »
This is a beautiful high-end example of the U.S. 1902 officer’s saber made by Eickorn of Solingen in excellent to near mint condition. The hilt and guard are steel, as mandated in December 1902, but… (2024-2063). Learn More »
This pattern of sword for wear by musicians was part of the 1840 series of arms that included new patterns of cavalry saber, officer’s sword, non-commissioned officer’s sword, etc. This is similar… (490-6745). Learn More »
A good example of the Moro kris, having the characteristic wavy blade of the kris, but made wider, heavier, and with more shallow curves, definitely a weapon made for cutting or slashing as well as… (490-6914). Learn More »
$350.00
ON HOLD
These broad bladed weapons could be used both as a dagger, chopper, or mounted on a pole for use a spearhead. Called a Hinalung, the handle is forged in one piece with the blade, simply folded round… (2023-800). Learn More »
This is one of Nathan Starr’s improved Model 1812 sabers, also known as the 1812/13 pattern. Starr was burdened with changes to the number ordered by federal government- from 1,000 to 5,000, and… (490-3562). Learn More »
This is a very scarce US Model 1832/34 sword for officers of infantry, artillery and ordnance made by Ames on contract with the U.S. government for officers of the regular army and inspected by Major… (870-318). Learn More »
This regulation M1850 Staff and Field Officer’s Sword was carried by an officer with a good combat record, being twice wounded in action, once as a line officer and once while Major while owning… (1052-1133). Learn More »
This non-regulation officer’s sword bears an 1861 presentation on the obverse scabbard, “Presented to/ Lieut. C.J. Murphy, / by his friends / 1861” and a list of battles on the reverse… (1052-1131). Learn More »
Charles Henry Tobey did three tours of duty during the war and this sword dates to his service as an officer, from January 1864 to muster out in July 1865, in the 58th Massachusetts, a regiment in the… (1052-1132). Learn More »
This Klingenthal made US Model 1850 foot officer’s sword bears a dead-real period inscription on the reverse of the scabbard throat reading: Robt. L. Orr / Independent / Greys. Orr had been active… (1052-1127). Learn More »
This regulation U.S. M1840 Medical Staff sword bears an elegant inscription in script: B.F. Taft/Asst. Surgeon 20th Mass. Vols./Fredericksburg on the obverse scabbard between the upper and middle… (1052-1118). Learn More »
This German hunting sword has lots of gilt finish left on the brass mounts of the hilt and a very clean blade showing deeply etched floral and animal motifs, along with a poem, with etching showing… (2024-273). Learn More »
This Federal edged weapon is an Ames Model 1832 U.S. Foot Artilleryman’s short sword in excellent original condition. Handsome and ruggedly made, this blade specimen is a product of the Ames… (490-6822). Learn More »
This is a good example of the short sword or side knife issued to foot troops in the mid to late 1800s for use in constructing fortifications and clearing undergrowth, but also as a potential last… (462-327). Learn More »
Showing 1 to 50 out of 106
Historical Firearms Stolen From The National Civil War Museum In Harrisburg, Pa »
Theft From Gravesite Of Gen. John Reynolds »
Selection Of Unframed Prints By Don Troiani »
Fine Condition Brass Infantry Bugle Insignia »
British Imported, Confederate Used Bayonet »
Scarce New Model 1865 Sharps Still In Percussion Near Factory New »
This sword bears a wonderful inscription to a newly commissioned officer from the men of his company, beside whom he had served as a sergeant through Antietam, Fredericksburg and other heavy fighting: Presented to / Lt. CORNELIUS BATCHELDER / 12th… (1052-1130). Learn More »