Firearms

Showing 1 to 50 out of 256


REVOLUTIONARY WAR PERIOD BULLET MOLD FOR BALL AND SHOT BY JOSIAH MILLER

REVOLUTIONARY WAR PERIOD BULLET MOLD FOR BALL AND SHOT BY JOSIAH MILLER

This brass scissor mold is made to cast nine small shot, eight larger shot, and a single ball of about 56 caliber indicating intended use in a smoothbore musket, fowler or hunting weapon, which are… (490-7289). Learn More »

$795.00
ON HOLD

COLT MODEL 1861 NAVY

COLT MODEL 1861 NAVY

Also known as the New Model Navy, the Model 1861 Navy was essentially the same pistol as the Late 4th Model 1851 Navy, but with a round barrel and “creeping” loading lever, giving it a smoother… (431-71). Learn More »

U. S. SPRINGFIELD M1863 TYPE I MUSKET DATED 1864

U. S. SPRINGFIELD M1863 TYPE I MUSKET DATED 1864

This Civil War longarm is a .58 caliber “Springfield” Model 1863, Type 1, single-shot muzzleloader in complete, excellent overall condition. The Springfield M1863 Type 1 musket was a government… (490-7393). Learn More »

$3,250.00
ON HOLD

ENGLISH/BELGIAN COPY OF SMITH & WESSON NO. 1 REVOLVER & HOLSTER IDENTIFIED TO 8TH MINNESOTA INFANTRY

ENGLISH/BELGIAN COPY OF SMITH & WESSON NO. 1 REVOLVER & HOLSTER IDENTIFIED TO 8TH MINNESOTA INFANTRY

This is a European (English or Belgian) copy of a Smith & Wesson, No. 1, Second Issue Revolver. It is a .32 caliber, seven-shot revolver with a 4” octagonal barrel, rosewood handles, with… (2022-986). Learn More »

$1,295.00
ON HOLD

NICE STARR CARBINE – LOW SERIAL “298”, EX-TEXAS CIVIL WAR MUSEUM COLLECTION

NICE STARR CARBINE – LOW SERIAL “298”, EX-TEXAS CIVIL WAR MUSEUM COLLECTION

Between 1861 and 1864 over 20,000 percussion model carbines were produced by the Starr Arms Company - a .54 caliber with a barrel length of 21 inches, overall 37.65 inches long. Barrel has approx. 98%… (1268-378). Learn More »

$2,950.00
ON HOLD

F. H. CLARK OF MEMPHIS DERINGER POCKET PISTOL EMBELLISHED WITH SEA CREATURE AND SEAHORSE MOUNTS

F. H. CLARK OF MEMPHIS DERINGER POCKET PISTOL EMBELLISHED WITH SEA CREATURE AND SEAHORSE MOUNTS

Few pistols are as emblematic of the antebellum south and early west as the Deringer. This one is clearly marked on the breech “F.H. CLARK & CO. / MEMPHIS” and was likely one of their… (490-7313). Learn More »

VERY GOOD AMES M1842 NAVY BOXLOCK PISTOL

VERY GOOD AMES M1842 NAVY BOXLOCK PISTOL

Produced from 1842 through1847, these were the standard US Navy percussion single-shot pistol in 1850s and widely issued. The 1852 Ordnance Instructions for the US Navy allotted them in numbers… (2025-1178). Learn More »

VERY RARE, M1861 SPRINGFIELD RIFLE MUSKET DATED 1861, WITH SLING

VERY RARE, M1861 SPRINGFIELD RIFLE MUSKET DATED 1861, WITH SLING

This is a first-year-of-production example the standard rifle musket of the Civil War, the Model 1861 Springfield, actually made at that armory. With production starting at Springfield in July 1861,… (2025-441). Learn More »

SMALL, ELEGANT PISTOL POWDER FLASK

SMALL, ELEGANT PISTOL POWDER FLASK

An elegant little powder flask for a pistol. The tapered spout, spring with blue left on it, and brass thumb catch are all in place on the round brass top and collar, with which is decorated with some… (2025-599). Learn More »

COLONEL SAMUEL COLT PRESENTATION REVOLVERS OF MAJOR GENERAL NATHANIEL P. BANKS

COLONEL SAMUEL COLT PRESENTATION REVOLVERS OF MAJOR GENERAL NATHANIEL P. BANKS

To say the pistols are National Treasures is an understatement. There is probably no more iconic revolver from the American Civil War era than the US Model 1860 Army revolver produced by the famous… (1268-180). Learn More »

THE GUN THAT REALLY WON THE (EARLY) WEST: ALLEN AND THURBER STANDARD OR MEDIUM SIZE PEPPERBOX

THE GUN THAT REALLY WON THE (EARLY) WEST: ALLEN AND THURBER STANDARD OR MEDIUM SIZE PEPPERBOX

Pepperboxes get some bad press for accuracy, but for pure firepower in a close-up encounter they did the job. Like this 4-1/2 inch, six-barrel .32 caliber version by Allen and Thurber, most were also… (2025-497). Learn More »

SMITH & WESSON NO. 2 ARMY REVOLVER

SMITH & WESSON NO. 2 ARMY REVOLVER

This is a Smith & Wesson, No. 2, Old Model Army Revolver. It is a .32 caliber, six-shot revolver with a 5” barrel, rosewood handles. Civil War serial number 3525. Production began in 1861, with… (2025-874). Learn More »

.71 CALIBER IRON MUSKET BALL MOLD

.71 CALIBER IRON MUSKET BALL MOLD

Iron scissor-type mold to cast a lead round ball for muskets.  Single cavity mold with spout and a sprue cutter in handle. Cavity measures approximately 0.70”. The number “15” is stamped in… (2025-871). Learn More »

$45.00
ON HOLD

ANSON MILLS PATENT CARTRIDGE BELT FOR THE .45-70 WITH NEW YORK BUCKLE

ANSON MILLS PATENT CARTRIDGE BELT FOR THE .45-70 WITH NEW YORK BUCKLE

This H-shaped, stamped belt plate was adopted by the U.S. Army in 1886 and used on what is sometimes called the “loose-loop” belt, which has woven cartridge loops and ends that are secured to the… (2025-908). Learn More »

$150.00
ON HOLD

THIRD MODEL, BRASS FRAME, 4-BARREL STARR PATENT PEPPERBOX PISTOL

THIRD MODEL, BRASS FRAME, 4-BARREL STARR PATENT PEPPERBOX PISTOL

Here is a very attractive .32 caliber third model pepperbox style pistol as made by Merrill Firearms Company in Baltimore for Eben T. Starr of Yonkers, NY. Similar in appearance to the Christian… (2025-653). Learn More »

COLT M1855 SIDE-HAMMER POCKET REVOLVER, MODEL 2

COLT M1855 SIDE-HAMMER POCKET REVOLVER, MODEL 2

This is a .28 caliber, 5 shot, single action, percussion revolver, with a 3.5” barrel. Maker barrel mark: “COLT’S PT.  ADDRESS COL. COLT / 1855 HARTFORD, CT USA”. Serial numbers (11625) are… (490-7322). Learn More »

$1,750.00
ON HOLD

REMINGTON "DOUBLE DERRINGER" SECOND MODEL

REMINGTON "DOUBLE DERRINGER" SECOND MODEL

Remington manufactured more than 150,000 over-under, double-barreled derringers from 1866 until the end of their production in 1935. This is a .41 rimfire with two 3" barrels. There is an extractor… (2025-499). Learn More »

$450.00
ON HOLD

SMITH & WESSON NO. 2 ARMY REVOLVER WITH 5-INCH BARREL

SMITH & WESSON NO. 2 ARMY REVOLVER WITH 5-INCH BARREL

This is a Smith & Wesson, No. 2, Old Model Army Revolver. It is a .32 caliber, six-shot revolver with 5” octagonal barrel and rosewood handles. Has early serial number of 1487 on butt strap.… (2025-491). Learn More »

HARPERS FERRY MODEL 1819 HALL RIFLE, DATED 1832 – CONVERTED TO PERCUSSION

HARPERS FERRY MODEL 1819 HALL RIFLE, DATED 1832 – CONVERTED TO PERCUSSION

The overall length of the weapon is 52.5” with a round .54 caliber barrel that measures approximately 32 ½” long. Bore is clean with rifling. The surface of the barrel is lacquered brown color… (2025-442). Learn More »

IRON .36 CALIBER BULLET MOLD FOR UNKNOWN REVOLVER

IRON .36 CALIBER BULLET MOLD FOR UNKNOWN REVOLVER

This mold is an iron scissor type mold with a swivel sprue cutter mounted on top. Measures 6” long. Mold casts a .36 caliber round ball and a two-groove elongated bullet. Cavities are very good. The… (2-685). Learn More »

CIVIL WAR CARBINE BORE CLEANING BRUSH

CIVIL WAR CARBINE BORE CLEANING BRUSH

This cavalry carbine cleaning brush device is an excellent example of a tool used to clean out the barrel bore of breechloading carbines during the war. Carried by most Federal cavalrymen, the item… (1268-383). Learn More »

REMINGTON-ELLIOT FOUR-BARREL DERRINGER

REMINGTON-ELLIOT FOUR-BARREL DERRINGER

Remington made these ring-trigger, multi-barrel, repeating derringers in .32 caliber from 1863 to 1888. Production is estimated at around 17,500 (70 percent of the combined total of 25,000 in both .22… (2025-498). Learn More »

$550.00
ON HOLD

COLT 1849 POCKET MODEL

COLT 1849 POCKET MODEL

This 1849 Colt pocket model revolver with all matching serial numbers is in good condition and has been reblued. The revolver has serial number 46470 matching on all parts but the unmarked loading… (2025-490). Learn More »

$975.00
ON HOLD

ORIGINAL WILLIAM W. MARSTON DOUBLE-ACTION BAR HAMMER PEPPERBOX PISTOL

ORIGINAL WILLIAM W. MARSTON DOUBLE-ACTION BAR HAMMER PEPPERBOX PISTOL

This Marston & Knox double-action percussion pepperbox pistol in is good original condition. Known by a number of trade names, this pepperbox pistol was made in New York during the 1850s and… (2025-496). Learn More »

IRON .42 CALIBER BULLET MOLD FOR RIFLES

IRON .42 CALIBER BULLET MOLD FOR RIFLES

This mold is an iron scissor type mold with sprue cutters formed into the handles. Heavy construction and measures 7.5” long. Mold casts a cylindrical bullet approximately .41” x 1” with round… (2-686). Learn More »

MASS. ARMS CO. .50 CALIBER SMITH/GALLAGER CARBINE BULLET MOLD

MASS. ARMS CO. .50 CALIBER SMITH/GALLAGER CARBINE BULLET MOLD

Single cavity conical bullet mold to cast bullet for Smith and Gallager carbines. Iron mold halves connected with hinge pin. The iron swivel sprue cutter that was attached at the top is broken at the… (2-681). Learn More »

BULLET MOLD FOR .28 CALIBER PISTOLS AND REVOLVERS

BULLET MOLD FOR .28 CALIBER PISTOLS AND REVOLVERS

Iron, two cavity bullet mold for the .28 caliber hand guns. This has two iron halves joined with a hinge pin at the end, no sprue cutter. Has cavities for both conical and round ball. Measures 4.5”… (2-679). Learn More »

BULLET MOLD FOR .31 CALIBER, COLT "POCKET" REVOLVER

BULLET MOLD FOR .31 CALIBER, COLT "POCKET" REVOLVER

Iron, two cavity bullet mold for the .31 caliber Colt Pocket revolvers. It casts one round ball and one elongated bullet. Sprue cutter is attached to the top at the hinge pin and is clearly marked… (286-1355). Learn More »

90-BORE (.36 CALIBER) SHARPS BULLET MOLD

90-BORE (.36 CALIBER) SHARPS BULLET MOLD

Iron, scissor-type bullet mold that cast a single .36 caliber “Old Model” Sharps bullet, aka “ringtail” for Sharps Sporting rifles. Mold measures approximately 8.5” overall with handle ends… (2-684). Learn More »

BRASS PICKET BULLET MOLD

BRASS PICKET BULLET MOLD

Brass, scissor-type bullet mold that cast a single .40” picket style for rifles. Mold measures approximately 6” overall. Brass mold with hand-made wood handles on ends.  Cavity remains in very… (2-671). Learn More »

$50.00
ON HOLD

MARTIALLY MARKED MODEL 1851 COLT NAVY REVOLVER

MARTIALLY MARKED MODEL 1851 COLT NAVY REVOLVER

This is a nice Model 1851 Colt Navy revolver. It is a .36 caliber revolver with six-shot cylinder, a 7 ½” octagonal barrel with attached loading lever, and iron frame with round trigger guard. All… (297-21). Learn More »

$3,500.00
ON HOLD

SINGLE SHOT PERCUSSION PISTOL BY HOLLIS OF LONDON PRESENTED TO BEVERLY KENNON, CSN

SINGLE SHOT PERCUSSION PISTOL BY HOLLIS OF LONDON PRESENTED TO BEVERLY KENNON, CSN

Offered here is a single shot .54 caliber percussion pistol is a product of gunmaker Richard Hollis of London, England, and identified to a navy officer who served in the U.S. and C.S. navies. The… (1268-689). Learn More »

CIVIL WAR SMITH CAVALRY CARBINE #7512

CIVIL WAR SMITH CAVALRY CARBINE #7512

This Smith carbine is complete, all original, rates very good for condition, and has a very good bore and rifling, and fine mechanics, though a little tight. The metal is smooth and the wood has a… (2025-338). Learn More »

$2,250.00
ON HOLD

PACKAGE OF 4MM FLOBERT PRIMED CASES

PACKAGE OF 4MM FLOBERT PRIMED CASES

Here is a round pasteboard box of primed cases for a 4mm Flobert pistol. Printed label on lid, printed red “tape” around side. Empty cases have “KC” headstamp. Good condition, but unknown… (172-4106). Learn More »

$100.00
Originally $125.00

BOOK, “D.L. NIMSCHKE, FIREARMS ENGRAVER” BY R.L. WILSON

BOOK, “D.L. NIMSCHKE, FIREARMS ENGRAVER” BY R.L. WILSON

Hardcover with dust jacket, 10.5" x 13", 108 pages. This 1992 reprint edition was limited to 1,500 copies. Original edition published in 1965. Very good condition overall. This is copied from the… (236-1052). Learn More »

1858 DATED BATTY “PEACE” FLASK- LAST YEAR OF PRODUCTION

1858 DATED BATTY “PEACE” FLASK- LAST YEAR OF PRODUCTION

This is a nice, untouched example of the Batty “Peace Flask” with a great un-messed with patina, good seams, good definition to the raised motifs with just a slight push at lower center of either… (632-101). Learn More »

12MM LEFAUCHEUX PINFIRE REVOLVER

12MM LEFAUCHEUX PINFIRE REVOLVER

Presented here is a M1854, 12mm Lefaucheux pinfire revolver. This style of handgun was designed and produced by the highly-acclaimed inventor of European firearms, Eugene Lefaucheux. Referred to as… (2025-327). Learn More »

$1,295.00
ON HOLD

BACON 2ND MODEL POCKET REVOLVER S/N 108

BACON 2ND MODEL POCKET REVOLVER S/N 108

Offered here is one of Thomas Bacon’s classic designs, the 2nd Model Pocket Revolver. These guns were inspired by the Colt Model 1849 Pocket Revolver and at least some of the design work was done… (2025-336). Learn More »

MINT JAPANESE NAMBU TYPE 14 PISTOL WITH MATCHING MAG

MINT JAPANESE NAMBU TYPE 14 PISTOL WITH MATCHING MAG

Exceptional Like-New example of the standard Japanese 8mm service pistol of World War II.  This pistol is impossible to upgrade.  Principal markings include: “18392” (serial number). Kanji… (2025-365). Learn More »

MINTY COLT “SPECIAL MODEL 1861” MUSKET, DATED 1863

MINTY COLT “SPECIAL MODEL 1861” MUSKET, DATED 1863

This original Civil War shoulder arm is a Colt “Special Model 1861” contract rifle musket made from 1861 to 1865 by the Colt Manufacturing Company of Hartford, Connecticut. Though no serial… (1268-185). Learn More »

U.S. M1855 .58 CALIBER BALL SCREW

U.S. M1855 .58 CALIBER BALL SCREW

Excellent specimen of an appendage used with the M1855, M1861, M1863, and possibly any other muskets. This is a ball screw (or puller) designed to extract musket balls from .58 caliber rifle muskets.… (286-1418). Learn More »

$65.00
SOLD

U.S. MODEL 1866 COMBINATION TOOL

U.S. MODEL 1866 COMBINATION TOOL

This is a non-excavated model 1866 musket tool made from surplus M1855 combination tool.  Three screw driver blades with the cone wrench cut off and two “spanner” pins cut in place. This spanner… (1268-189). Learn More »

U.S. MODEL 1855 TUMBLER PUNCH

U.S. MODEL 1855 TUMBLER PUNCH

Just about every US rifle or carbine cartridge box of the period has a small separate implement pouch for the gun tools, oily rags, etc., necessary for the cleaning and maintenance of the soldier’s… (1268-191). Learn More »

SHARPS AND HANKINS NAVY CARBINE

SHARPS AND HANKINS NAVY CARBINE

This is a good example of the single-shot, breech-loading .52 Caliber rimfire Sharps and Hankins Navy Carbine, also known as the Second Model or Model 1862, complete, all original, and showing some… (1244-01). Learn More »

$3,000.00
Originally $3,250.00

NICE COLT M1848 DRAGOON HOLSTER

NICE COLT M1848 DRAGOON HOLSTER

The M1848 Dragoon was slightly lighter than the previous Walker. However, the Ordnance Department believed it was still too large, heavy and awkward to be carried in anything but pommel holsters. This… (1268-756B). Learn More »

.577 CALIBER ENGLISH ENFIELD CARTRIDGE

.577 CALIBER ENGLISH ENFIELD CARTRIDGE

Paper cartridge for the Enfield rifle. English-made cartridge containing .577 caliber bullet. Bullet end dipped in wax with regulation cut visible under the wax.  Typical tape “band” construction… (1268-106). Learn More »

$175.00
ON HOLD

12MM PERRIN REVOLVER CARTRIDGE

12MM PERRIN REVOLVER CARTRIDGE

This is a self-contained and primed copper cartridge with flat-nosed lead bullet. The copper case has been cleaned. These were centerfire cartridges where the primer was held internally, seated on an… (1212-198). Learn More »

COSTON’S “NIGHT-SIGNAL” FLARE CARTRIDGE

COSTON’S “NIGHT-SIGNAL” FLARE CARTRIDGE

Offered here is a scarce signal flare cartridge. Measures 2.75” long overall and 1” in diameter. White and green wrapper. Excellent condition. The signals prepared in the form of these cartridges,… (1268-197). Learn More »

$495.00
ON HOLD

ONE-PIECE “SLIM JIM” HOLSTER – EX-TEXAS MUSEUM COLLECTION

ONE-PIECE “SLIM JIM” HOLSTER – EX-TEXAS MUSEUM COLLECTION

This is a brown leather “Slim Jim” holster for M1851, M1861 Colt Navy, and subsequent conversions. Holster body is one piece, joined by a single seam stitch along the rear. Stitching remains… (1179-700B). Learn More »

CIVIL WAR IMPORT AUSTRIAN/PIEDMONT-SARDINIA/LIEGE MUSKETOON

CIVIL WAR IMPORT AUSTRIAN/PIEDMONT-SARDINIA/LIEGE MUSKETOON

This nice looking imported musketoon likely arrived in the U.S. courtesy of American purchasing agents scouring Europe for arms in 1861 and 1862. This is smoothbore, .70 caliber, with an overall… (998-27). Learn More »

$1,200.00
Originally $1,650.00


Showing 1 to 50 out of 256

featured item

“SOFT TACK:” AERATED BREAD CRATE

This would make a nice addition to a camp, sutler, Sanitary Commission or even a hospital display. Constructed of thin, about ½” thick, unpainted, wide pine boards that are simply nailed together, this is about 18” X 13 ¾” X 12” and is… (1202-166). Learn More »

Upcoming Events

15
Jul
Instagram